Abstract

The process monitoring of the top side and the evaluation of surface quality were applied in adjustable ring mode (ARM) laser welding of 316 stainless steel by using visual monitoring and confocal sensor technology. Experiments were conducted in different power arrangements of an ARM laser. In this study, the process status was evaluated based on the area of keyhole entrance and the width of the pool. The geometric characteristics of the topside weld were measured by a confocal sensor. The shape of the fusion zone was analyzed based on its cross section. The process mechanism of a different mode of ARM laser welding was investigated by analyzing the process status and geometric characteristics of the surface bead. Experimental results showed that dual-mode laser welding could stabilize the keyhole entrance with a uniform weld surface formation in comparison to the pure ring-mode laser weld. The dual-mode laser also generated a wider molten pool with a wider fusion zone than the pure center laser weld.

© 2020 Optical Society of America

Status analysis of keyhole bottom in laser-MAG hybrid welding process

Lin Wang, Xiangdong Gao, and Ziqin Chen
Opt. Express 26(1) 347-355 (2018)

Keyhole morphology monitoring of laser welding based on image processing and principal component analysis

Ting Lei, Shiyang Gu, and Huiwen Yu
Appl. Opt. 61(6) 1492-1499 (2022)

Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding

Jianglin Zou, Na Ha, Rongshi Xiao, Qiang Wu, and Qunli Zhang
Opt. Express 25(15) 17650-17656 (2017)

Direct observation of keyhole characteristics in deep penetration laser welding with a 10 kW fiber laser

Mingjun Zhang, Genyu Chen, Yu Zhou, and Shichun Li
Opt. Express 21(17) 19997-20004 (2013)

Optical techniques for real-time penetration monitoring for laser welding

Fabrice Bardin, Adolfo Cobo, Jose M. Lopez-Higuera, Olivier Collin, Pascal Aubry, Thierry Dubois, Mats Högström, Per Nylen, Peter Jonsson, Julian D. C. Jones, and Duncan P. Hand
Appl. Opt. 44(19) 3869-3876 (2005)