Add to BibSonomy
Abstract
Chemiluminesence is one of the most common reacting flow visualization techniques, in which a narrowband wavelength associated with species radicals is captured on an image sensor. This technique can provide key insights into flame physics, particularly when a full 3D field can be extracted. Tomographic imaging can capture 3D instantaneous information, but becomes impractical to use when the technique is extended to larger, heavier high-speed imaging equipment. This has resulted in many researchers using fiber-based endoscopes (FBE) to capture multiple views on a single image sensor. However, the introduction of the fiber bundle and corresponding equipment to image specific combustion radicals results in a low SNR imaging environment when captured at high repetition rates. Additionally, when varying equivalence ratios, the signal can become further diminished because the combustion radicals signal weakens at fuel rich and fuel lean conditions. Therefore, this work determines the efficacy of using a filter-intensified FBE approach to capture the CH* radical of a hydrocarbon flame under varying equivalence ratio conditions by comparing the resulting reconstructions to previous quantitative flame measurements.
© 2021 Optical Society of America
Full Article | PDF ArticleMore Like This
Khadijeh Mohri, Simon Görs, Jonathan Schöler, Andreas Rittler, Thomas Dreier, Christof Schulz, and Andreas Kempf
Appl. Opt. 56(26) 7385-7395 (2017)
Lei Han, Qiang Gao, Bo Li, and Zhongshan Li
Appl. Opt. 61(25) 7361-7365 (2022)
Devashish Chorey, Vishal Jagadale, Megha Prakash, Dag Hanstorp, Mats Andersson, Devendra Deshmukh, and Yogeshwar Nath Mishra
Appl. Opt. 62(14) 3737-3746 (2023)