Abstract

In a stretcher, the surface distortion of the optical elements can introduce spectral phase modulations into the laser, which can affect the laser’s signal-to-noise ratio. In this paper, by combining ray tracing methods and angular spectrum diffraction methods, the impact of the mid-frequency surface distortion of the optical elements in an cylindrical Offner stretcher on the far-field signal-to-noise ratio of the laser is simulated. The results show that reducing the spatial chirp on the convex cylindrical mirror can effectively improve the far-field signal-to-noise ratio of the laser, and two methods to improve the far-field signal-to-noise ratio are presented.

© 2023 Optica Publishing Group

Picosecond contrast degradation by surface imperfections in chirped-pulse-amplification stretchers

V. A. Schanz, M. Roth, and V. Bagnoud
J. Opt. Soc. Am. A 36(10) 1735-1742 (2019)

Evaluation of chirped-pulse-amplification systems with Offner triplet telescope stretchers

Jie Jiang, Zhigang Zhang, and Toshifumi Hasama
J. Opt. Soc. Am. B 19(4) 678-683 (2002)

Influence of optical quality on chirped-pulse amplification: characterization of a 150-nm-bandwidth stretcher

V. Bagnoud and F. Salin
J. Opt. Soc. Am. B 16(1) 188-193 (1999)

Ray-tracing analysis of a single-grating stretcher with an arbitrary three-mirror unit-magnification telescope

Pavel Kostryukov
J. Opt. Soc. Am. B 38(6) 1942-1950 (2021)

Influence of skew rays on the sensitivity and signal-to-noise ratio of a fiber-optic surface-plasmon-resonance sensor: a theoretical study

Yogendra S. Dwivedi, Anuj K. Sharma, and Banshi D. Gupta
Appl. Opt. 46(21) 4563-4569 (2007)