Abstract

Long schlieren imaging systems, where the parallel light test section is longer than the focal length of the focusing schlieren optics, have a limited region in the test section in which any occluding object, such as a wind tunnel model, is in focus in the schlieren image. Corrector lenses are introduced here to alter the location in the test section where image focus is achieved. Corrector lenses with focal lengths varying from ${-}1000$ to ${-}100\;{\rm mm} $ were studied. Lens-type inline and ${z}$-type mirror schlieren systems were experimentally tested with multiple collecting optic focal lengths to characterize the changes in focal position. An automated image processing method was used to determine the plane of best focus from image sequences. The introduction of the corrector lens was observed to move the location of best focus within the schlieren system test section while also causing a decrease in the focal sharpness of the images and altering the magnification. The thin lens equation was found to provide a good estimate of the focal location change in the schlieren imaging systems with the addition of the corrector lens.

© 2023 Optica Publishing Group

Colinear focused laser differential interferometry and self-aligned focusing schlieren

Joshua M. Weisberger and Brett F. Bathel
Appl. Opt. 62(18) 4958-4970 (2023)

Compact color schlieren optical system

Donald R. Buchele and DeVon W. Griffin
Appl. Opt. 32(22) 4218-4222 (1993)

Design of an in-water corrector system

Milton Laikin
Appl. Opt. 41(19) 3777-3780 (2002)

Methodology of designing compact schlieren systems using off-axis parabolic mirrors

Lingzhi Zheng, Adam J. Susa, and Ronald K. Hanson
Appl. Opt. 61(16) 4857-4864 (2022)

Physically based simulation of focusing schlieren imaging for a hypersonic boundary layer flow

Mingjia Chen, Bing Liu, Fei Qin, Xiao Liu, and Bo Zhou
Appl. Opt. 63(6) A44-A51 (2024)