Abstract

A fiber optic probe for the simultaneous measurement of chloride ions and temperature is presented. The Ag/alginate composite film is used as the reflective surface of the Fabry–Perot interferometer (FPI) and is a sensitive film for the adsorption of chloride ions. The experimental results show that the Fabry–Perot (FP) response sensitivity is approximately 1.4689 nm/µM as the chloride ion concentration changes from 1 to 9 µM, but the fiber Bragg grating (FBG) is insensitive to chloride ions. When the temperature is changed from 35°C to 80°C, the response sensitivities of the FP and the FBG are about 0.7 and 0.01115 nm/°C, respectively.

© 2023 Optica Publishing Group

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Junjie Zhu, Wei He, Shaode Li, Zhihan Li, and Lianqing Zhu
Appl. Opt. 62(25) 6661-6671 (2023)

Composite Fabry–Perot interferometric gas pressure and temperature sensor utilizing four hole fiber with sensitivity boosted by high-order harmonic Vernier effect

Ling Chen, Jiajun Tian, Qiang Wu, Jiewen Li, Yong Yao, and Jiawei Wang
Opt. Express 31(15) 24988-25003 (2023)

Signal processing integrated with fiber-optic Vernier effect for the simultaneous measurement of relative humidity and temperature

Yu Wang, Weihao Yuan, Yaxi Yan, Zhenggang Lian, Daru Chen, Alan Pak Tao Lau, Changyuan Yu, and Chao Lu
Opt. Express 31(17) 28636-28648 (2023)

High-sensitivity optical fiber relative humidity probe with temperature calibration ability

Lei Liang, Hao Sun, Nan Liu, Hao Luo, Tingting Gang, Qiangzhou Rong, Xueguang Qiao, and Manli Hu
Appl. Opt. 57(4) 872-876 (2018)

Simple fiber-optic sensor for simultaneous and sensitive measurement of high pressure and high temperature based on the silica capillary tube

Haoyang He, Yi Liu, Yingying Liao, Changpeng Lang, Yan Li, and Shiliang Qu
Opt. Express 27(18) 25777-25788 (2019)