Properties of Ni-Al<sub>2</sub>O<sub>3</sub> composite coating by laser-assisted pulse electrodeposition

Xu Miao; Haiyun Zhang; Haiyun Zhang; Yugang Zhao; Yugang Zhao; Xingang Han; Weisheng Lin; Guangfen Jiang; Jianbing Meng; Jianbing Meng; Zengbo Zhang; Jinjian Zhang

doi:10.1364/AO.478974

Applied Optics
Vol. 62,
Issue 5,
pp. 1384-1391
(2023)
•https://doi.org/10.1364/AO.478974

Properties of Ni-Al₂O₃ composite coating by laser-assisted pulse electrodeposition

Xu Miao, Haiyun Zhang, Yugang Zhao, Xingang Han, Weisheng Lin, Guangfen Jiang, Jianbing Meng, Zengbo Zhang, and Jinjian Zhang

Not Accessible

Your library or personal account may give you access

Get PDF
Email
Share
Get Citation
Copy Citation Text
Xu Miao, Haiyun Zhang, Yugang Zhao, Xingang Han, Weisheng Lin, Guangfen Jiang, Jianbing Meng, Zengbo Zhang, and Jinjian Zhang, "Properties of Ni-Al₂O₃ composite coating by laser-assisted pulse electrodeposition," Appl. Opt. 62, 1384-1391 (2023)

Export Citation
- BibTex
- Endnote (RIS)
- HTML
- Plain Text
Citation alert
Save article

Check for updates

Related Topics
Table of Contents Category
- Lasers, Optical Amplifiers, and Laser Optics
Optics & Photonics Topics
?

The topics in this list come from the Optics and Photonics Topics applied to this article.

About this Article
History
- Original Manuscript: November 2, 2022
- Revised Manuscript: January 1, 2023
- Manuscript Accepted: January 3, 2023
- Published: February 7, 2023

Abstract

To study the influence of laser process parameters on the surface properties of the coating, ${\rm{Ni}}\text{-}{\rm{A}}{{\rm{l}}_2}{{\rm{O}}_3}$ composite coatings on 304 stainless-steel sheets with laser-assisted pulsed electrodeposition was proposed in this paper. Laser single pulse energy and scanning speed were selected as research factors. Single-factor experiments were performed to investigate the effect of various factors on the surface morphology, particle mass fraction, microhardness, surface roughness, and corrosion resistance of the composite coating. The experimental results show that the surface properties of the composite coating first increase and then decrease with increasing laser single pulse energy. When the laser single pulse energy is 11 µJ, the minimum surface roughness value is 0.380 µm with a smooth and uniform coating surface and the best surface morphology. Moreover, as the scanning speed increases, the corrosion resistance of the composite coating initially increases and then decreases. The corrosion resistance of the composite coatings is best with a scanning speed of 1000 mm/s. When the scanning speed was 1500 mm/s, the particle mass fraction in the coating reached a maximum of 1.984%; meanwhile, the highest hardness of the composite coating was obtained with the value of 476.38 HV.

Full Article | PDF Article

More Like This

Effect of surface modification on wettability and tribology by laser texturing in Al₂O₃

Xiubing Jing, Yani Xia, Shuxian Zheng, Chengjuan Yang, Huan Qi, and Syed Husain Imran Jaffery
Appl. Opt. 60(15) 4434-4442 (2021)

Relation of optical properties and femtosecond laser damage resistance for Al₂O₃/AlF₃ and Al₂O₃/SiO₂ composite coatings

Mathias Mende, Istvan Balasa, Henrik Ehlers, Detlev Ristau, Dam-be Douti, Laurent Gallais, and Mireille Commandré
Appl. Opt. 53(4) A383-A391 (2014)

Investigation of multiple laser shock peening on the mechanical property and corrosion resistance of shipbuilding 5083Al alloy under a simulated seawater environment

Hao Wang, Yihui Huang, Wenwu Zhang, and Andreas Ostendorf
Appl. Opt. 57(22) 6300-6308 (2018)

Previous Article Next Article

Data availability

Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (11)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (7)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Process Parameter	Value Range
Lasing wavelength/nm	1030/515
Maximum power/W	80
Pulse frequency/MHz	0.025–5
Pulse width/ps	50–2000

Content	Values
$N i C l_{2}$ (g/l)	45
$N i S O_{4}$ (g/l)	280
$H_{3} {B O}_{3}$ (g/l)	40
Sodium dodecyl sulfate (g/l)	0.1
Particle size $A l_{2} O_{3}$ nanoparticles of 50 nm (g/l)	5
pH	3 to 4
Current density ( $A / {d m}^{2}$ )	4
Duty cycle (%)	60
Pulse frequency (Hz)	600
Deposition time (h)	1
Stirring speed ( $r / min$ )	210–230
Temperature (°C)	45–55

Single Pulse Energy/µJ	Surface Roughness Value/µm
8	0.444
11	0.380
14	0.409
17	0.460

Scanning Speed/(mm/s)	Surface Roughness Value/µm
500	0.396
1000	0.380
1500	0.338
2000	0.402

Monopulse Energy/µJ	$φ_{c o r r}$ (versus SCE)/V	$j_{c o r r} / (A c m^{- 2})$
8	−0.693	$2.002 \times 10^{- 6}$
11	−0.470	$1.690 \times 10^{- 6}$
14	−0.378	$2.07 \times 10^{- 6}$
17	−0.254	$2.952 \times 10^{- 6}$

Scanning Speed/(mm/s)	$φ_{corr}$ (versus SCE)/V	$j_{corr} / (A {cm}^{- 2})$
500	−0.774	$3.103 \times 1 0^{- 6}$
1000	−0.470	$1.690 \times 1 0^{- 6}$
1500	−0.440	$1.977 \times 1 0^{- 6}$
2000	−0.401	$2.525 \times 1 0^{- 6}$

Electrodeposition Method	Surface Roughness Value/µm	Microhardness/HV	Mass Fraction of Nano- $A l_{2} O_{3}$ Particles/%	$φ_{c o r r}$ (versus SCE)/V	$j_{c o r r} / (A c m^{- 2})$
Direct current	0.588	326.87	4.214	−0.5666	$3.258 \times 1 0^{- 6}$
Pulsed current	1.195	414.48	6.406	−0.7262	$3.761 \times 1 0^{- 6}$

Abstract

Data availability

Cited By

Figures (11)

Tables (7)

Applied Optics