Abstract

The technology known as precision injection molding (PIM) has shown great promise in the large-scale manufacturing of optical plastic lenses. The primary challenge with the PIM process is accurately predicting and reducing residual stress in optical plastic lenses. In this work, the finite element method (FEM) was used to analyze the residual stress distribution in plastic lenses. A three-dimensional model was created using COMSOL software to investigate how residual stress and temperature varied in optical plastic lenses during the packing and cooling stages. Based on the results, variable temperature assisted injection molding experiments were conducted. The results show that the average residual stress in the optical plastic lenses has decreased by 56%, while the minimum and maximum residual stress levels have decreased by 60% and 61%, respectively. Since this method does not require the extra heat treatment of the optical lenses, it offers considerable cost and efficiency benefits.

© 2024 Optica Publishing Group

Optimization of injection molding process parameters and axial surface compensation for producing an aspheric plastic lens with large diameter and center thickness

Xirui Lan, Chuang Li, Chao Yang, and Changxi Xue
Appl. Opt. 58(4) 927-934 (2019)

Study of process parameters on optical qualities for injection-molded plastic lenses

Huai En Lai and Pei Jen Wang
Appl. Opt. 47(12) 2017-2027 (2008)

Analysis of optical properties in injection-molded and compression-molded optical lenses

Chung Yen Wang and Pei Jen Wang
Appl. Opt. 53(11) 2523-2531 (2014)

Effects of the injection compression process parameters on residual stress of plastic lenses

Simeng Chen, Baohua Li, Yajun Zhang, and Zhiming Jin
Appl. Opt. 59(30) 9626-9632 (2020)

Prediction model of residual stress during precision glass molding of optical lenses

Hang Fu, Changxi Xue, Yue Liu, Bo Cao, Changfu Lang, and Chao Yang
Appl. Opt. 61(5) 1194-1202 (2022)