Abstract

Kinetic experiments are often followed by spectroscopic measurements in the visible or near ultraviolet region. The advantage is not only that the results can be recorded continuously, which makes very fast reactions accessible, but also that very low concentrations of substrates can be used. This means that only very small amounts are required and, more important perhaps, that reagents can be used in excess. Thus pseudomonomolecular conditions and first-order kinetics often can be achieved easily.

Uncertainty analysis for the determination of B₄C optical constants by angle-dependent reflectance measurement for 40  nm to 80  nm wavelength

Alexander Gottwald, Karl Wiese, Udo Kroth, and Mathias Richter
Appl. Opt. 56(20) 5768-5774 (2017)

Measurement of an isosbestic point in the Raman spectrum of liquid water by use of a backscattering geometry

David N. Whiteman, George E. Walrafen, Wen-Huang Yang, and S. Harvey Melfi
Appl. Opt. 38(12) 2614-2615 (1999)

Rapid ratiometric determination of hemoglobin concentration using UV-VIS diffuse reflectance at isosbestic wavelengths

Janelle E. Phelps, Karthik Vishwanath, Vivide T. C. Chang, and Nirmala Ramanujam
Opt. Express 18(18) 18779-18792 (2010)

Tunable laser flash absorption: a new technique for measuring rates and yields of chemical reactions at high temperatures

William A. VonDrasek, Shigeo Okajima, John H. Kiefer, Paul J. Ogren, and Jan P. Hessler
Appl. Opt. 29(33) 4899-4906 (1990)

10  Gbps wavelength division multiplexing using UV-A, UV-B, and UV-C micro-LEDs

Daniel M. Maclure, Jonathan J. D. McKendry, Mohamed Sufyan Islim, Enyuan Xie, Cheng Chen, Xiaobin Sun, Xudong Liang, Xiaohui Huang, Hanaa Abumarshoud, Johannes Herrnsdorf, Erdan Gu, Harald Haas, and Martin D. Dawson
Photon. Res. 10(2) 516-523 (2022)