Abstract

In vibrational circular dichroism (VCD) measurements and other polarization modulation techniques, artifact signals often arise due to polarization sensitivity of the optical components located subsequent to the sample. In this paper, we describe a method for demodulating the light beam after passage through the sample in such a manner that only one linearly polarized state is allowed to reach the detector, thus eliminating these artifacts. The method is a beam reversal technique in which the light subsequent to the sample is redirected through the photoelastic modulator in such a way that the retardation produced on the first traversal through the modulator is removed. The light is returned to its original state of linear polarization prior to detection. The method is applicable to Fourier transform as well as to dispersive spectrometers since demodulation is effected for all wavelengths simultaneously. The results of preliminary demodulation experiments are presented and found to be more than 90% efficient in removing circular dichroism intensity of a birefringent origin.

Elimination of artifacts derived from the residual birefringence of a phase modulator for circular dichroism by retardation domain analysis

Hiroshi Satozono
Opt. Lett. 40(7) 1161-1164 (2015)

A picosecond time-resolved vibrational circular dichroism spectrometer

Mathias Bonmarin and Jan Helbing
Opt. Lett. 33(18) 2086-2088 (2008)

Polarization scrambling using a photoelastic modulator: Application to circular dichroism measurement

J. C. Cheng, L. A. Nafie, and P. J. Stephens
J. Opt. Soc. Am. 65(9) 1031-1035 (1975)

Theoretical simulation of a polarization modulator based on mechanical rotation of a polarizing element

Petr Maloň and Timothy A. Keiderling
Appl. Opt. 36(24) 6141-6148 (1997)

Method for artifact-free circular dichroism measurements based on polarization grating

Clementina Provenzano, Pasquale Pagliusi, Alfredo Mazzulla, and Gabriella Cipparrone
Opt. Lett. 35(11) 1822-1824 (2010)