Abstract

A high solids content n-butyl acrylate/methyl methacrylate emulsion copolymerization process carried out under starved semi-batch conditions was for the first time monitored on-line by means of Fourier transform (FT)-Raman spectroscopy. Partial least squares regression was employed to build calibration models that allowed relating the spectra with solids content (overall conversion), free amounts of both n-butyl acrylate (n-BA) and methyl methacrylate (MMA), and cumulative copolymer composition. In spite of the heterogeneous nature of the polymerization, the similarities of the spectra for MMA, n-BA, and for the copolymer, and the low monomer concentrations in the reactor, the FT-Raman spectroscopy has been shown to be a suitable noninvasive sensor to accurately monitor the process. Therefore, it is well suited for on-line control of all-acrylic polymerization systems.

Commercial scale fabrication method for fabricating a gradient refractive-index rod: overcoming volume shrinkage and chemical restrictions

Hansol Cho, Young Mok Son, Mu Gyeom Kim, Byoung Joo Ra, Joon-Yong Park, Seung Hui Lee, Jin Sung Choi, Min Young Song, O. Ok Park, Youn Cheol Kim, and Jin Taek Hwang
Appl. Opt. 45(28) 7239-7247 (2006)

Nondestructive quantification of the soluble-solids content and the available acidity of apples by Fourier-transform near-infrared spectroscopy

Yibin Ying, Yande Liu, and Yang Tao
Appl. Opt. 44(25) 5224-5229 (2005)

Studies on the light-focusing plastic rod. 17: Plastic GRIN rod lens prepared by photocopolymerization of a ternary monomer system

Yasuhiro Koike, Hideyuki Hatanaka, and Yasuji Ohtsuka
Appl. Opt. 23(11) 1779-1783 (1984)

Glass-batch composition monitoring by laser-induced breakdown spectroscopy

Bansi Lal, Fang-Yu Yueh, and Jagdish P. Singh
Appl. Opt. 44(18) 3668-3674 (2005)

Raman spectroscopy of gases with a Fourier transform spectrometer: the spectrum of D₂

Donald E. Jennings, A. Weber, and J. W. Brault
Appl. Opt. 25(2) 284-290 (1986)