Abstract

This article describes the use of Fourier transform infrared (FT-IR) spectroscopy to quantitatively measure the hydroxyl concentrations among narrow boiling shale oil cuts. Shale oil samples were from an industrial solid heat carrier retort. Reference values were measured by titration and were used to create a partial least squares regression model from FT-IR data. The model had a root mean squared error (RMSE) of 0.44 wt% OH. This method was then used to study the distribution of hydroxyl groups among more than 100 shale oil cuts, which showed that hydroxyl content increased with the average boiling point of the cut up to about 350 °C and then leveled off and decreased.

Rapid determination of the main components of corn based on near-infrared spectroscopy and a BiPLS-PCA-ELM model

Lili Xu, Jinming Liu, Chunqi Wang, Zhijiang Li, and Dongjie Zhang
Appl. Opt. 62(11) 2756-2765 (2023)

Quantitative Fourier transform IR photoacoustic spectroscopy of condensed phases

Y. C. Teng and B. S. H. Royce
Appl. Opt. 21(1) 77-80 (1982)

Nondestructive quantification of the soluble-solids content and the available acidity of apples by Fourier-transform near-infrared spectroscopy

Yibin Ying, Yande Liu, and Yang Tao
Appl. Opt. 44(25) 5224-5229 (2005)

Qualitative and quantitative analysis of steatite using calibration-free laser-induced breakdown spectroscopy in conjunction with x-ray fluorescence spectroscopy and Fourier-transform infrared spectroscopy

Muhammad Fahad, Asim Shahzad, Sajjad Ali, and Khizar Hussain Shah
Appl. Opt. 60(17) 5110-5116 (2021)

Transformer oil quality evaluation using quantitative phase microscopy

Xinyi Xing, Lin Zhu, Chao Chen, Nan Sun, Chuankai Yang, Keding Yan, Liang Xue, and Shouyu Wang
Appl. Opt. 61(2) 422-428 (2022)