Abstract

Attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy, in which the sample is pressed against an internal reflection element, is a popular technique for rapid IR spectral collection. However, depending on the accessory design, the pressure applied to the sample is not always well controlled. While collecting data from fabrics with heterogeneous coatings, we have observed systematic pressure-dependent changes in spectra that can be eliminated by more reproducible pressure control. We also described a pressure sensor adapted to work with an ATR tower to enable more precise control of pressure during ATR sampling.

© 2016 The Author(s)

Refractive indices of powdered materials using attenuated total reflectance spectroscopy

James B. Gillespie and George H. Goedecke
Appl. Opt. 28(18) 3985-3992 (1989)

Attenuated total reflectance spectroscopy with chirped-pulse upconversion

Hideto Shirai, Constance Duchesne, Yuji Furutani, and Takao Fuji
Opt. Express 22(24) 29611-29616 (2014)

Moldable optical element: a new tool to obtain the infrared attenuated-total-reflection spectrum of a rough surface

Alexandre M. Kondyrev and Alexandre E. Tshmel
Appl. Opt. 34(22) 4989-4992 (1995)

Thin-film absorption coefficients by attenuated-total-reflection spectroscopy

R. T. Holm and E. D. Palik
Appl. Opt. 17(3) 394-403 (1978)

Procedures for Attenuated Total Reflection Study of Extremely Small Samples

Tomas Hirschfeld
Appl. Opt. 6(4) 715-718 (1967)