Abstract

Water absorbed to poly(methyl methacrylate) (PMMA)-based CAD/CAM (computer-assisted design/computer-assisted manufacturing) prosthodontics can alter their properties including hardness and stability. In the present contribution, water absorption and desorption kinetics under defined experimental conditions were monitored employing several supplementary and advanced Fourier transform infrared (FT-IR) spectroscopic techniques in combination with multivariate analysis (MVA). In this synergistic vibrational spectroscopic multimethod approach, first a novel near-infrared (NIR) diffuse fiber optic probe reflection spectroscopic method was established for time-resolved analysis of water uptake within seven days under controlled conditions. Near-infrared water absorbance spectra in a wavenumber range between 5288–5100 cm⁻¹ (combination band) and 5424–5352 cm⁻¹ (second overtone) were used establishing corresponding calibration and validation models to quantify the amount of water in the milligram range. Therefore, 14 well-defined samples exposed to prior optimized experimental conditions were taken into consideration. The average daily water uptake conducting reference analysis was calculated as 22 mg/day for one week. Additionally, in this study for the first time NIR two-dimensional correlation spectroscopy (2D-COS) was conducted to monitor and interpret the spectral dynamics of water absorption on the prosthodontics in a wavenumber range of 5100–5300 cm⁻¹. For sensitive time-resolved recording of water desorption, a recently developed high-temperature, high-pressure FT-IR reaction cell with water-free ultra-dry in situ and operando operation was applied. The reaction cell, as well as the sample holder, was fully made of quartz glass, with no hot metal or ceramic parts in the vicinity of the high temperature zone. Applying a temperature gradient in the range of 25–150 ℃, mid-infrared (MIR) 2D-COS was successfully conducted to get insights into the dynamic behavior of O–H (1400–1800 cm⁻¹) absorption bands with increasing temperature over time and the release of CO₂ (2450 cm⁻¹) from the polymers. In addition, an ATR FT-IR imaging setup was optimized in order to investigate the surface homogeneity of the PMMA-based resins with a spatial resolution to 2 µm. From this vibrational spectroscopic multimethod approach and the collection of several analytical data, conclusions were drawn as to which degree the surface structure and/or its porosity have an impact onto the amount of water absorption.

© 2016 The Author(s)

Effect of molecular concentration on spectroscopic properties of poly(methyl methacrylate) thin films doped with rhodamine 6G dye

C. On, E. K. Tanyi, E. Harrison, and M. A. Noginov
Opt. Mater. Express 7(12) 4286-4295 (2017)

Methylene blue sensitized poly(methyl methacrylate) matrix: a novel holographic material

Stanislaw Bartkiewicz and Andrzej Miniewicz
Appl. Opt. 34(23) 5175-5178 (1995)

Photochemistry of refractive index structures in poly(methyl methacrylate) by femtosecond laser irradiation

Alexandra Baum, Patricia J. Scully, Maria Basanta, C. L. Paul Thomas, Peter R. Fielden, Nicholas J. Goddard, Walter Perrie, and Paul R. Chalker
Opt. Lett. 32(2) 190-192 (2007)

Humidity dependence of the birefringence in poly(methyl methacrylate) waveguides

John C. Pincenti and David L. Naylor
Appl. Opt. 33(6) 1090-1094 (1994)

Formation of micro protrusive lens arrays atop poly(methyl methacrylate)

Yong Zhao, Chang Chun Wang, Wei Min Huang, Hendra Purnawali, and Lin An
Opt. Express 19(27) 26000-26005 (2011)