Abstract

As a technique capable of rapid, nondestructive, and multi-elemental analysis, portable X-ray fluorescence (pXRF) has applications to mineral exploration, environmental evaluation, and archaeological analysis. However, few applications have been conducted in the smelting industry especially when analyzing the metal concentration in ore concentrate samples. This research analyzed the effectiveness of using pXRF in determining the metal concentration in Fe concentrate. For this proof of concept study, Fe ore samples dominated by Fe and Si were collected from the Northeastern University Mineral Processing Laboratory (Shenyang, China) and directly analyzed using pXRF, laboratory-based XRF, and titration methods. The compactness (density) of the ore concentrate was found to have very little effect on pXRF readings. The pXRF readings for Fe and Si were comparative to laboratory-based XRF results. Based on the strong correlations between the pXRF and XRF results (Fe: R²> 0.99, Si: R²> 0.96), linear calibrations were adopted to improve the accuracy of pXRF readings. Linear regression equations derived from the relations between XRF results and pXRF results of 21 Fe ore concentrate samples were used to calibrate the pXRF, and then validation was performed on five additional samples. Results from this preliminary study suggest that ordinary least squares (OLS) regression improves the accuracy dramatically, especially for Fe with relative errors (REs) decreasing to 0.03%–3.27% from 4.26%–8.32%. Consequently, pXRF shows strong promise for rapid, quantitative analysis of Fe concentration in Fe ore concentrate. Based on the results obtained in this study, a larger, more comprehensive study is warranted to confirm the results obtained.

© 2019 The Author(s)

Efficient weakly supervised LIBS feature selection method in quantitative analysis of iron ore slurry

Tong Chen, Lanxiang Sun, Haibin Yu, Lifeng Qi, Dong Shang, and Yuanming Xie
Appl. Opt. 61(7) D22-D29 (2022)

On-stream analysis of iron ore slurry using laser-induced breakdown spectroscopy

Xiao Cheng, Xinyan Yang, Zhihao Zhu, Lianbo Guo, Xiangyou Li, Yongfeng Lu, and Xiaoyan Zeng
Appl. Opt. 56(33) 9144-9149 (2017)

Qualitative and quantitative analysis of steatite using calibration-free laser-induced breakdown spectroscopy in conjunction with x-ray fluorescence spectroscopy and Fourier-transform infrared spectroscopy

Muhammad Fahad, Asim Shahzad, Sajjad Ali, and Khizar Hussain Shah
Appl. Opt. 60(17) 5110-5116 (2021)

Quantitative analysis of energy-dispersive X-ray fluorescence spectroscopy based on machine learning and a generative data enhancement technique

Wei Zhao, Xianyun Ai, and Hui Zhao
Appl. Opt. 62(36) 9476-9485 (2023)

Acidity measurement of iron ore powders using laser-induced breakdown spectroscopy with partial least squares regression

Z.Q. Hao, C.M. Li, M. Shen, X.Y. Yang, K.H. Li, L.B. Guo, X.Y. Li, Y.F. Lu, and X.Y. Zeng
Opt. Express 23(6) 7795-7801 (2015)