Abstract

Quartz is the most abundant mineral on the earth's surface. It is spectrally active in the longwave infrared (LWIR) region with no significant spectral features in the optical domain, i.e., visible–near-infrared–shortwave-infrared (Vis–NIR–SWIR) region. Several space agencies are planning to mount optical image spectrometers in space, with one of their missions being to map raw materials. However, these sensors are active across the optical region, making the spectral identification of quartz mineral problematic. This study demonstrates that indirect relationships between the optical and LWIR regions (where quartz is spectrally dominant) can be used to assess quartz content spectrally using solely the optical region. To achieve this, we made use of the legacy Israeli soil spectral library, which characterizes arid and semiarid soils through comprehensive chemical and mineral analyses along with spectral measurements across the Vis–NIR–SWIR region (reflectance) and LWIR region (emissivity). Recently, a Soil Quartz Clay Mineral Index (SQCMI) was developed using mineral-related emissivity features to determine the content of quartz, relative to clay minerals, in the soil. The SQCMI was highly and significantly correlated with the Vis–NIR–SWIR spectral region (R²= 0.82, root mean square error (RMSE) = 0.01, ratio of performance to deviation (RPD) = 2.34), whereas direct estimation of the quartz content using a gradient-boosting algorithm against the Vis–NIR–SWIR region provided poor results (R²= 0.45, RMSE = 15.63, RPD = 1.32). Moreover, estimation of the SQCMI value was even more accurate when only the 2000–2450 nm spectral range (atmospheric window) was used (R²= 0.9, RMSE = 0.005, RPD = 1.95). These results suggest that reflectance data across the 2000–2450 nm spectral region can be used to estimate quartz content, relative to clay minerals in the soil satisfactorily using hyperspectral remote sensing means.

© 2021 The Author(s)

Mass-specific light absorption coefficients of mineral particles in aqueous suspension for the ultraviolet to near-infrared radiation spectral region (200–2500 nm)

Christian Utschig and Rüdiger Röttgers
Appl. Opt. 59(33) 10554-10564 (2020)

Estimation of quartz concentration in the tropospheric mineral aerosols using combined Raman and high-spectral-resolution lidars

Boyan Tatarov and Nobuo Sugimoto
Opt. Lett. 30(24) 3407-3409 (2005)

Spectral Absorption Characteristics of the Major Components of Dust Clouds

D. F. Flanigan and H. P. DeLong
Appl. Opt. 10(1) 51-57 (1971)

Comprehensive study of solid pharmaceutical tablets in visible, near infrared (NIR), and longwave infrared (LWIR) spectral regions using a rapid simultaneous ultraviolet/visible/NIR (UVN) + LWIR laser-induced breakdown spectroscopy linear arrays detection system and a fast acousto-optic tunable filter NIR spectrometer

Clayton S.C Yang, Feng Jin, Siva R. Swaminathan, Sita Patel, Evan D. Ramer, Sudhir B. Trivedi, Ei E. Brown, Uwe Hommerich, and Alan C. Samuels
Opt. Express 25(22) 26885-26897 (2017)

Infrared Spectral Reflectance of Some Common Minerals

W. A. Hovis
Appl. Opt. 5(2) 245-248 (1966)