Abstract

A fiber Bragg grating (FBG) and Fabry–Perot (FP) cavity cascaded fiber sensing system was manufactured for temperature and pressure sensing. Temperature sensing as high as 175°C was performed by an FBG for the linear variation of an FBG wavelength with temperature. After the temperature was sensed, the demodulation system can find the original FP cavity length and its pressure and cavity length correlation coefficient; thus, the ambient pressure would be calculated. The sensing pressure can be as high as 100 MPa with a repeatability of 1/10,000 and high stability. This kind of fiber sensor has been used in the Shengli Oil Field.

© 2019 Chinese Laser Press

All-silica fiber-optic temperature-depth-salinity sensor based on cascaded EFPIs and FBG for deep sea exploration

Yueying Liu, Zhenguo Jing, Qiang Liu, Ang Li, Ang Lee, Yang Cheung, Yang Zhang, and Wei Peng
Opt. Express 29(15) 23953-23966 (2021)

Metal-coated high-temperature strain optical fiber sensor based on cascaded air-bubble FPI-FBG structure

Jianqiao Liang, Yang Yu, Qiang Bian, Wenjie Xu, Zhencheng Wang, Shumao Zhang, Junjie Weng, Jiajian Zhu, Yong Chen, Xiaoyang Hu, Junbo Yang, and Zhenrong Zhang
Opt. Express 31(10) 16795-16811 (2023)

Effect of hydrogen gas on FBG-based optical fiber sensors for downhole pressure and temperature monitoring

Ji-Ying Huang, Jan Van Roosbroeck, Johan Vlekken, Damien Kinet, Antonio Bueno Martinez, Thomas Geernaert, Francis Berghmans, Bram Van Hoe, Eric Lindner, and Christophe Caucheteur
Opt. Express 27(4) 5487-5501 (2019)

Temperature-induced inconsistency in the pressure sensitivity of polymer-diaphragm-based FP pressure sensors

YanJin Zhao, NingFang Song, Fuyu Gao, XiaoBin Xu, and ZiHang Gao
Opt. Mater. Express 13(3) 687-698 (2023)

Batch-producible MEMS fiber-optic Fabry–Perot pressure sensor for high-temperature application

Pinggang Jia, Hao Liang, Guocheng Fang, Jiang Qian, Fei Feng, Ting Liang, and Jijun Xiong
Appl. Opt. 57(23) 6687-6692 (2018)