Abstract

A novel tri-layer Si-based micro-cantilever thermal infrared (IR) detector with carbon nanotube (CNT) film is fabricated. It is based on the characteristic that the composite micro-cantilever bends in response to incident IR thermal radiation due to the bi-material effect. The bending of micro-cantilever is piezoresistively detected. Furthermore, a new IR absorbing layer material --- CNTs --- is coated in order to enhance IR radiation absorbing characteristic. the micro-electro-mechanical system (MEMS) sensor could be compatible with integrated circuit technology.

© 2005 Chinese Optics Letters

Two-color thermal detector with thermal chopping for infrared focal-plane arrays

Vladimir N. Leonov and Donald P. Butler
Appl. Opt. 40(16) 2601-2610 (2001)

Far infrared thermal detectors for laser radiometry using a carbon nanotube array

John H. Lehman, Bob Lee, and Erich N. Grossman
Appl. Opt. 50(21) 4099-4104 (2011)

Thermal noise in mid-infrared broadband upconversion detectors

Ajanta Barh, Peter Tidemand-Lichtenberg, and Christian Pedersen
Opt. Express 26(3) 3249-3259 (2018)

Nanophotonic detector array to enable direct thermal infrared vision

Chinmay Khandekar, Weiliang Jin, and Shanhui Fan
Opt. Express 30(21) 39222-39233 (2022)

Thermal conductivity tensors of the cladding and active layers of antimonide infrared lasers and detectors

Chuanle Zhou, I. Vurgaftman, C. L. Canedy, C. S. Kim, M. Kim, W. W. Bewley, C. D. Merritt, J. Abell, J. R. Meyer, A. Hoang, A. Haddadi, M. Razeghi, and M. Grayson
Opt. Mater. Express 3(10) 1632-1640 (2013)