Abstract

This paper addresses the specific technological challenges of autostereoscopic 3-D displays and presents a novel system that integrates an active slanted LED backlight slit system with slanted lenticular lens array. Including light scattering strips configured to scatter the illumination light, and disposed on the light guide plate. Furthermore, with a sheet of polymer-dispersed liquid crystal film (PDLC film) placed above the backlight, a 2-D/3-D switchable backlight was implemented. We developed and demonstrated the backlight toward higher light-efficiency than barrier-type, even close to lenticular type autostereoscopic displays.

© 2014 IEEE

Numerical simulation and experimental verification of a dense multi-view full-resolution autostereoscopic 3D-display-based dynamic shutter parallax barrier

Yang Meng, Zhongyuan Yu, Chunyu Zhang, Ye Wang, Yumin Liu, Han Ye, and Laurence Lujun Chen
Appl. Opt. 58(5) A228-A233 (2019)

Adaptive glasses-free 3D display with extended continuous viewing volume by dynamically configured directional backlight

Xiaoke Li, Juan Ding, Hantao Zhang, Mingjun Chen, Weitang Liang, Shuying Wang, Hang Fan, Kunyang Li, and Jianying Zhou
OSA Continuum 3(6) 1555-1567 (2020)

Switchable liquid crystal lenticular microlens arrays based on photopolymerization-induced phase separation for 2D/3D autostereoscopic displays

Wenfeng Cai, Ming Cheng, Delai Kong, Zongjun Ma, and Yan Jun Liu
Opt. Express 32(1) 625-638 (2024)

Design and fabrication of optical system for time-multiplex autostereoscopic display

Jian-Chiun Liou and Fo-Hau Chen
Opt. Express 19(12) 11007-11017 (2011)

Autostereoscopic 3D display with high brightness and low crosstalk

Guo-Jiao Lv, Bai-Chuan Zhao, Fei Wu, Wu-Xiang Zhao, Ya-Zhi Yang, and Qiong-Hua Wang
Appl. Opt. 56(10) 2792-2795 (2017)