Abstract

This paper proposes the use of a Lagrange interpolation polynomial to meet the illumination distribution requirements of single-LED units, in both a square and a triangular arrangement, for direct-lit backlighting to obtain uniform illumination to be used for designing secondary optical lenses. In addition, we propose the use of a wider illumination coverage of LED units to achieve excellent assembly displacement tolerance. We also define an evaluation formula for combining the uniformity and tolerance of the LED unit to select its ideal corresponding light intensity distribution as the target of the lens design in direct-lit LED backlight modules.

© 2016 IEEE

New reversing design method for LED uniform illumination

Kai Wang, Dan Wu, Zong Qin, Fei Chen, Xiaobing Luo, and Sheng Liu
Opt. Express 19(S4) A830-A840 (2011)

Designing single LED illumination distribution for direct-type backlight

Jinbo Zheng and Keyuan Qian
Appl. Opt. 52(28) 7022-7027 (2013)

Optimization design of irradiance array for LED uniform rectangular illumination

Rengmao Wu, Zhenrong Zheng, Haifeng Li, and Xu Liu
Appl. Opt. 51(13) 2257-2263 (2012)

Edge/direct-lit hybrid mini-LED backlight with U-grooved light guiding plates for local dimming

Enguo Chen, Ju Guo, Zongzhao Jiang, Qiongxin Shen, Yun Ye, Sheng Xu, Jie Sun, Qun Yan, and Tailiang Guo
Opt. Express 29(8) 12179-12194 (2021)

Design of a brightness-enhancement-film-adaptive freeform lens to enhance overall performance in direct-lit light-emitting diode backlighting

Bin Xie, Run Hu, Qi Chen, Xingjian Yu, Dan Wu, Kai Wang, and Xiaobing Luo
Appl. Opt. 54(17) 5542-5548 (2015)