Abstract
Crack-free thin film InGaN/GaN multiple quantum wells light-emitting diodes (LEDs) were successfully transferred from 2-in Si (1 1 1) growth substrate onto a thin epoxy resin carrier. The good chemical corrosion resistance of epoxy resin simplifies the protective processes during silicon substrate wet-chemical etching. The Raman spectra measurement shows an obvious relaxation of tensile strain after the LEDs structure transferred to epoxy resin carrier. Combining with a metal reflector deposition after silicon removed, the thin-film LEDs on epoxy resin carrier show significant improvement in comparison with the conventional LEDs on silicon. The operating voltage at 350 mA decreases from 4.95 to 4.5 V and the series resistance decreases from 3.1 to 2.6 Ω. Light output shows an increase of 92% after the LEDs transferred to epoxy resin carrier.
© 2016 IEEE
PDF Article
More Like This
Performance enhancement of yellow InGaN-based multiple-quantum-well light-emitting diodes grown on Si substrates by optimizing the InGaN/GaN superlattice interlayer
Xixia Tao, Junlin Liu, Jianli Zhang, Chunlan Mo, Longquan Xu, Jie Ding, Guangxu Wang, Xiaolan Wang, Xiaoming Wu, Zhijue Quan, Shuan Pan, Fang Fang, and Fengyi Jiang
Opt. Mater. Express 8(5) 1221-1230 (2018)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription