Abstract
This paper reports on the use of cellulose paper simultaneously as
electrolyte, separation of electrodes, and physical support of a rechargeable battery. The
deposition on both faces of a paper sheet of metal or metal oxides thin
layers with different electrochemical potentials, respectively as anode and
cathode, such as Cu and Al, lead to an output voltage of 0.70 V and a
current density that varies between 150 nA/cm$^{2}$ and 0.5 mA/cm$^{2}$, subject to the paper composition, thickness and the degree of OH$_{\rm x}$ species adsorbed in the paper matrix. The electrical output of
the paper battery is independent of the electrodes thickness but strongly
depends on the atmospheric relative humidity (RH), with a current density
enhancement by more than 3 orders of magnitude when RH changes from 60% to
85%. Besides flexibility, low cost, low material consumption, environmental
friendly, the power output of paper batteries can be adapted to the
desired voltage–current needed, by proper integration. A 3-V
prototype was fabricated to control the ON/OFF state of a paper
transistor.
© 2010 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription