Abstract

Metamaterials for the mid-infrared spectrum require subwavelength meta-structures with dimensions of a few hundreds of nanometers. Fabrication via fiber drawing is challenging as the Plateau–Rayleigh instability caused by interfacial surface tension between the liquid metal and the dielectric during the drawing leads to fluctuation of the structure, preventing drawing of uniform wire array structures with such dimensions. Here, conventional fiber drawing technique is employed in the fabrication of wire array metamaterial fibers containing tin wires embedded in soda–lime glass. Plateau–Rayleigh instabilities ensuing detrimental deformations on submicron metallic structures are minimized through the selection of materials with favorable rheological properties and the optimization of the drawing parameters. Uniform wire array structures with wire diameter and spacing as small as 143 and 286 nm, respectively, are demonstrated. The application of this established fabrication process represents a large-volume and low-cost alternative for the production of hyperbolic metamaterials. The new metamaterial fibers achieved open up a range of exciting applications at mid-infrared frequencies, such as lifetime engineering and super-resolution imaging.

© 2019 IEEE

Towards subdiffraction imaging with wire array metamaterial hyperlenses at MIR frequencies

Juliano G. Hayashi, Alessio Stefani, Sergei Antipov, Richard Lwin, Stuart D. Jackson, Darren D. Hudson, Simon Fleming, Alexander Argyros, and Boris T. Kuhlmey
Opt. Express 27(15) 21420-21434 (2019)

Metal selection for wire array metamaterials for infrared frequencies

Juliano G. Hayashi, Simon Fleming, Boris T. Kuhlmey, and Alexander Argyros
Opt. Express 23(23) 29867-29881 (2015)

Tunable metamaterials fabricated by fiber drawing

Simon Fleming, Alessio Stefani, Xiaoli Tang, Alexander Argyros, Daniel Kemsley, James Cordi, and Richard Lwin
J. Opt. Soc. Am. B 34(7) D81-D85 (2017)

Exploration of in-fiber nanostructures from capillary instability

D. S. Deng, J.-C. Nave, X. Liang, S. G. Johnson, and Y. Fink
Opt. Express 19(17) 16273-16290 (2011)

Thermal poling of multi-wire array optical fiber

Lin Huang, Honglin An, Juliano G. Hayashi, Guobin Ren, Alessio Stefani, and Simon Fleming
Opt. Express 26(2) 674-679 (2018)