Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Enhancing the flexibility and functionality of SCNs: demonstration of evolution toward any-core-access, nondirectional, and contentionless spatial channel cross-connects [Invited]

Open Access Open Access

Abstract

A spatial channel network (SCN) was recently proposed toward the forthcoming spatial division multiplexing (SDM) era, in which the optical layer is explicitly evolved to the hierarchical SDM and wavelength division multiplexing layers, and an optical node is decoupled into a spatial cross-connect (SXC) and wavelength cross-connect to achieve an ultrahigh-capacity optical network in a highly economical manner. In this paper, we report feasibility demonstrations of an evolution scenario regarding the SCN architecture to enhance the flexibility and functionality of spatial channel networking from a simple fixed-core-access and directional spatial channel ring network to a multidegree, any-core-access, nondirectional, and core-contentionless mesh SCN. As key building blocks of SXCs, we introduce what we believe to be novel optical devices: a ${1} \times {2}$ multicore fiber (MCF) splitter, a core selector (CS), and a core and port selector (CPS). We construct free-space optics-based prototypes of these devices using five-core MCFs. Detailed performance evaluations of the prototypes in terms of the insertion loss (IL), polarization-dependent loss (PDL), and intercore cross talk (XT) are conducted. The results show that the prototypes provide satisfactorily low levels of IL, PDL, and XT. We construct a wide variety of reconfigurable spatial add/drop multiplexers (RSADMs) and SXCs in terms of node degree, interport cross-connection architecture, and add/drop port connectivity flexibilities. Such RSADMs/SXCs include a fixed-core-access and directional RSADM using a ${1} \times {2}$ MCF splitter; an any-core-access, nondirectional SXC with core-contention using a CS; and an any-core-access, nondirectional SXC without core-contention using a CPS. Bit error rate performance measurements for SDM signals that traverse the RSADMs/SXCs confirm that there is no or a very slight optical signal-to-noise-ratio penalty from back-to-back performance. We also experimentally show that the flexibilities in the add/drop port of the SXCs allow us to recover from a single or concurrent double link failure with a wide variety of options in terms of availability and cost-effectiveness.

© 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
More Like This
Technoeconomic analysis of spatial channel networks (SCNs): benefits from spatial bypass and spectral grooming [Invited]

Masahiko Jinno, Yu Asano, Yoshiki Azuma, Takahiro Kodama, and Riku Nakai
J. Opt. Commun. Netw. 13(2) A124-A134 (2021)

Bidirectional single-multicore-fiber spatial channel network based on a spatial cross-connect and multicore EDFA that efficiently accommodates asymmetric data traffic

Kyosuke Nakada, Hitoshi Takeshita, Yuki Kuno, Yusuke Matsuno, Itsuki Urashima, Yusuke Shimomura, Yuji Hotta, Tsubasa Sasaki, Yudai Uchida, Kohei Hosokawa, Ryohei Otowa, Rika Tahara, Emmanuel Le Taillandier de Gabory, Yasuki Sakurai, Ryuichi Sugizaki, and Masahiko Jinno
J. Opt. Commun. Netw. 15(11) 871-882 (2023)

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (25)

Fig. 1.
Fig. 1. Basic SXC architecture providing fixed-core-access and directional connectivity.
Fig. 2.
Fig. 2. (a) SCh ring network based on an RSADM and (b) fixed-core-access, directional RSADM architecture in B&S configuration.
Fig. 3.
Fig. 3. Free-space-optics-based building blocks for a fixed-core-access, directional RSADM in B&S configuration.
Fig. 4.
Fig. 4. Pictures and IL/PDL characteristics of the $1 \times 2$ MCF splitter prototype.
Fig. 5.
Fig. 5. Restoration of horizontal flipping by a cascading MCF splitter and a CSS.
Fig. 6.
Fig. 6. Experimental configurations for wideband optical data stream generation and pre-FEC BER versus OSNR measurement.
Fig. 7.
Fig. 7. Experimental configuration for through operation mode in the RSADM.
Fig. 8.
Fig. 8. Experimental configuration for add/drop operation mode in the RSADM.
Fig. 9.
Fig. 9. Pre-FEC BER performance in the through and add/drop operation modes for a 100 Gb/s DP-QPSK optical signal in wideband optical data transmitted through one of the outer cores that are simultaneously routed by the RSADM.
Fig. 10.
Fig. 10. (a) SCh mesh network based on SXCs and (b) possible implementation of a $1 \times n$ CSS.
Fig. 11.
Fig. 11. SXC architectures providing any-core-access, directional functionality.
Fig. 12.
Fig. 12. Any-core-access, nondirectional, with core-contention SXC architecture based on client-side CSSs, aggregation/distribution CSSs, and CSs.
Fig. 13.
Fig. 13. Any-core-access, nondirectional, without core-contention SXC architecture based on CPSs.
Fig. 14.
Fig. 14. Possible implementation of (a) a CS and (b) a CPS.
Fig. 15.
Fig. 15. (a), (b) Pictures of the CS/CPS prototype and (c) optimum mirror angles of the prototype for connecting to each core in each output MCF.
Fig. 16.
Fig. 16. IL for each core in MCF 2 as a function of wavelength.
Fig. 17.
Fig. 17. (a) IL and (b) PDL for each core of six output MCFs.
Fig. 18.
Fig. 18. Transmission of each core in MCF 2 measured as the target core changed in turn.
Fig. 19.
Fig. 19. Experimental configuration for testing SXC having any-core-access and nondirectional features with core-contention.
Fig. 20.
Fig. 20. Spectra for input and output wideband optical data streams and BER versus OSNR performance in SXC with core-contention.
Fig. 21.
Fig. 21. Experimental configuration for testing SXC having any-core-access and nondirectional features without core-contention.
Fig. 22.
Fig. 22. Spectra for input and output wideband optical data streams and BER versus OSNR performance in SXC without core-contention.
Fig. 23.
Fig. 23. Shared SCh protection for single-failure recovery and shared SCh protection with WDM layer fallback for double-failure recovery.
Fig. 24.
Fig. 24. Experimental configuration for testing shared SCh protection with WDM layer fallback.
Fig. 25.
Fig. 25. Experimental configuration for testing an SXC having any-core-access and nondirectional features without core-contention.

Tables (1)

Tables Icon

Table 1. Architectural Options and Associated Key Components in Designing SXCs and SCNs

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.