Abstract
A point cloud can be obtained from three-dimensional measurement reconstruction based on fringe projection. However, there are holes in a point cloud due to objects with complicated shapes and the defect of the method. The holes have a profound impact on the subsequent data processing. A fitting approach to fill the holes based on structure from motion (SFM) is proposed in this paper. First, fringe projection with a two-dimensional phase is used to extract the hole boundary. Second, the registration of the SFM point cloud and the fringe projection point cloud is carried out. Then supplementary points are extracted. Third, the holes are filled based on a radial basis function on the point cloud added with the supplementary points. This method has been proven to be robust by experiments, and information of complex surface holes can be restored sufficiently.
© 2019 Optical Society of America
Full Article | PDF ArticleMore Like This
Hao Ma, Keke Liu, Jingbin Liu, Hongyu Qiu, Dong Xu, Zemin Wang, Xiaodong Gong, and Sheng Yang
J. Opt. Soc. Am. A 38(4) 579-586 (2021)
Peng Wang and Liyan Zhang
Appl. Opt. 59(35) 10986-10994 (2020)
Wei Feng, Tong Qu, Junhui Gao, Henghui Wang, Xiuhua Li, Zhongsheng Zhai, and Daxing Zhao
Appl. Opt. 60(24) 7086-7093 (2021)