Abstract
Enhancement of Brillouin gain efficiency in a multiwavelength L-band Brillouin-erbium comb fiber laser is presented. In this laser architecture, bi-directional amplification of the injected Brillouin pump signal within the erbium gain medium, before entering the single-mode fiber was utilized. Owing to this bi-directional pre-amplification of the Brillouin pump power, the requirement of a long single-mode fiber to increase the Brillouin gain efficiency was overcome. The shot length of a single-mode fiber was utilized to achieve a high number of output channels with high peak power. Up to 25 output channels with a constant wavelength separation of 0.089 nm were achieved at 170 mW of 1480 nm pump power and 0.54 mW of Brillouin pump power in a 0.5 km short single-mode fiber.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
Mohammed Hayder Al-Mansoori and Mohd Adzir Mahdi
Appl. Opt. 48(18) 3424-3428 (2009)
M. H. Al-Mansoori and M. A. Mahdi
Opt. Express 19(24) 23981-23988 (2011)
Mohammed Haydar Al-Mansoori and Mohd Adzir Mahdi
Opt. Express 16(11) 7649-7654 (2008)