Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of the Optical Society of Korea
  • Vol. 13,
  • Issue 4,
  • pp. 478-483
  • (2009)

Simulation and Fabrication of the Cone Sheet for LCD Backlight Application

Open Access Open Access


An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness 30~50 μm were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

© 2009 Optical Society of Korea

PDF Article
More Like This
Reflective composite sheet design for LCD backlight recycling

Taehyung Kim, Kibeom Kim, Eun Soo Lee, Won Young Jeong, Dae Young Lim, and Suk-Won Choi
Opt. Express 22(9) 11175-11181 (2014)

Edge-lit LCD backlight unit for 2D local dimming

Gun-Wook Yoon, Seok-Won Bae, Yong-Bok Lee, and Jun-Bo Yoon
Opt. Express 26(16) 20802-20812 (2018)

Simple liquid crystal display backlight unit comprising only a single-sheet micropatterned polydimethylsiloxane (PDMS) light-guide plate

Joo-Hyung Lee, Hong-Seok Lee, Byung-Kee Lee, Won-Seok Choi, Hwan-Young Choi, and Jun-Bo Yoon
Opt. Lett. 32(18) 2665-2667 (2007)

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Select as filters

Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.