Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Journal Home About Issues in Progress Current Issue All Issues Feature Issues

Design and global optimization of high-efficiency thermophotovoltaic systems

Peter Bermel, Michael Ghebrebrhan, Walker Chan, Yi Xiang Yeng, Mohammad Araghchini, Rafif Hamam, Christopher H. Marton, Klavs F. Jensen, Marin Soljačić, John D. Joannopoulos, Steven G. Johnson, and Ivan Celanovic

Open Access Open Access

Abstract

Despite their great promise, small experimental thermophotovoltaic (TPV) systems at 1000 K generally exhibit extremely low power conversion efficiencies (approximately 1%), due to heat losses such as thermal emission of undesirable mid-wavelength infrared radiation. Photonic crystals (PhC) have the potential to strongly suppress such losses. However, PhC-based designs present a set of non-convex optimization problems requiring efficient objective function evaluation and global optimization algorithms. Both are applied to two example systems: improved micro-TPV generators and solar thermal TPV systems. Micro-TPV reactors experience up to a 27-fold increase in their efficiency and power output; solar thermal TPV systems see an even greater 45-fold increase in their efficiency (exceeding the Shockley–Quiesser limit for a single-junction photovoltaic cell).

© 2010 Optical Society of America

Full Article  |  PDF Article
More Like This
Design and global optimization of high-efficiency solar thermal systems with tungsten cermets

David Chester, Peter Bermel, John D. Joannopoulos, Marin Soljacic, and Ivan Celanovic
Opt. Express 19(S3) A245-A257 (2011)

Performance analysis of experimentally viable photonic crystal enhanced thermophotovoltaic systems

Yi Xiang Yeng, Walker R. Chan, Veronika Rinnerbauer, John D. Joannopoulos, Marin Soljačić, and Ivan Celanovic
Opt. Express 21(S6) A1035-A1051 (2013)

Photonic crystal enhanced silicon cell based thermophotovoltaic systems

Yi Xiang Yeng, Walker R. Chan, Veronika Rinnerbauer, Veronika Stelmakh, Jay J. Senkevich, John D. Joannopoulos, Marin Soljacic, and Ivan Čelanović
Opt. Express 23(3) A157-A168 (2015)

View More...

References

  • View by:
  • Article Order
  • Year
  • Author
  • Publication
  1. H. H. Kolm, “Solar-battery power source,” Tech. Rep., MIT Lincoln Laboratory (1956). Quarterly Progress Report, Group 35, p. 13.
  2. B. Wedlock, “Thermo-photo-voltaic conversion,” Proc. IEEE 51, 694–698 (1963).
    [Crossref]
  3. R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).
  4. F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
    [Crossref]
  5. H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
    [Crossref]
  6. J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).
  7. A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).
  8. J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
    [Crossref]
  9. H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
    [Crossref]
  10. U. Ortabasi and B. Bovard, “Rugate technology for thermophotovoltaic applications: a new approach to near perfect filter performance,” AIP Conf. Proc. 653, 249–258 (2003).
    [Crossref]
  11. I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
    [Crossref]
  12. D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
    [Crossref]
  13. I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
    [Crossref]
  14. T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
    [Crossref]
  15. S. John and R. Wang, “Metallic photonic band-gap filament architectures for optimized incandescent lighting,” Phys. Rev. A 78, 043809 (2008).
    [Crossref]
  16. J. Gee, “Optically enhanced absorption in thin silicon layers using photonic crystals,” in Twenty-Ninth IEEE Photovolt. Spec. Conf., pp. 150–153 (2002).
    [Crossref]
  17. M. Ghebrebrhan, P. Bermel, Y. Avniel, J. D. Joannopoulos, and S. G. Johnson, “Global optimization of silicon photovoltaic cell front coatings,” Opt. Express 17, 7505–7518 (2009).
    [Crossref] [PubMed]
  18. B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).
  19. M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).
  20. L. Li, “Formulation and comparison of two recursive matrix algorithms for modeling layered diffraction gratings,” J. Opt. Soc. Am. A 13, 1024–1035 (1996).
    [Crossref]
  21. D. Whittaker and I. Culshaw, “Scattering-matrix treatment of patterned multilayer photonic structures,” Phys. Rev. B 60, 2610–2618 (1999).
    [Crossref]
  22. P. Bienstman, “Rigorous and efficient modelling of wavelength scale photonic components,” Ph.D. thesis, University of Ghent, Belgium (2001).
  23. A. Taflove and S. C. Hagness, Computational Electrodynamics, 2nd ed. (Artech House, Norwood, MA, 2000).
  24. A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
    [Crossref]
  25. C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
    [Crossref]
  26. J. Zhao and M. Green, “Optimized Antireflection Coatings for High-Efficiency Silicon Solar Cells,” IEEE Trans. Electron Dev. 38, 1925 (1991).
    [Crossref]
  27. G. Rybicki and A. Lightman, Radiative processes in astrophysics (John Wiley and Sons, 1979).
  28. S. Kucherenko and Y. Sytsko, “Application of deterministic low-discrepancy sequences in global optimization,” Computational Optimization and Applications 30, 297–318 (2005).
    [Crossref]
  29. M. Powell, Advances in Optimization and Numerical Analysis (Kluwer Academic, Dordrecht, Holland, 1994).
  30. J. M. Gablonsky and C. T. Kelley, “A locally-biased form of the DIRECT algorithm,” J. Global Optim. 21(1), 27–37 (2001).
    [Crossref]
  31. R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).
  32. C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
    [Crossref]
  33. S. Deshmukh and D. Vlachos, “A reduced mechanism for methane and one-step rate expressions for fuel-lean catalytic combustion of small alkanes on noble metals,” Combust. Flame 149, 366–383 (2007).
    [Crossref]
  34. B. Blackwell, “Design, fabrication, and characterization of a micro fuel processor,” Ph.D. thesis, Massachusetts Institute of Technology (2008).
  35. C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
    [Crossref]
  36. M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
    [Crossref]
  37. S. Sze, Physics of Semiconductor Devices (Wiley and Sons, New York, 1981).
  38. W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
    [Crossref]
  39. P. Wilkinson, “Photonic Bloch oscillations and Wannier-Stark ladders in exponentially chirped Bragg gratings,” Phys. Rev. E 65, 056,616 (2002).
    [Crossref]
  40. C. Henry, “Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells,” J. Appl. Phys. 51, 4494–4500 (1980).
    [Crossref]
  41. B. G. Bovard, “Rugate filter theory: an overview,” Appl. Opt. 32, 5427–5442 (1993).
    [Crossref] [PubMed]
  42. J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).
  43. A. Yariv, Y. Xu, R. K. Lee, and A. Scherer, “Coupled-resonator optical waveguide: a proposal and analysis,” Opt. Lett. 24, 711–713 (1999).
    [Crossref]
  44. M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.
  45. W. Spirkl and H. Ries, “Solar thermophotovoltaics: an assessment,” J. Appl. Phys. 57, 4409–4414 (1985).
    [Crossref]
  46. N. Harder and P. Wurfel, “Theoretical limits of thermophotovoltaicsolar energy conversion,” Semicond. Sci. Technol. 18, S151 (2003).
    [Crossref]
  47. A. Luque, “Solar Thermophotovoltaics: Combining Solar Thermal andPhotovoltaics,” AIP Conf. Proc. 890, 3–16 (2007).
    [Crossref]
  48. A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
    [Crossref]
  49. E. Rephaeli and S. Fan, “Absorber and emitter for solar thermophotovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit,” Opt. Express 17, 15,145–15,159 (2009).
    [Crossref]
  50. ASTMG173-03, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 degree Tilted Surface (ASTM International, West Conshohocken, Pennsylvania, 2005).
    [PubMed]
  51. T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
    [Crossref]
  52. Q.-C. Zhang, “High efficiency Al-N cermet solar coatings with double cermet layer film structures,” J. Phys. D: Appl. Phys. 32, 1938–1944 (1999).
    [Crossref]
  53. C. Kennedy, “Review of mid- to high-temperature solar selective absorber materials,” Tech. Rep. TP-520-31267, National Renewable Energy Laboratory (2002).
  54. N. Sergeant, O. Pincon, M. Agrawal, and P. Peumans, “Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks,” Opt. Express 17, 22800–22812 (2009).
    [Crossref]
  55. N. Sergeant, M. Agrawal, and P. Peumans, “High performance solar-selective absorbers using sub-wavelength gratings,” Opt. Express 18, 5525–5540 (2010).
    [Crossref] [PubMed]
  56. Y. Varshni, “Temperature dependence of the energy gap in semiconductors,” Physica 34, 149–154 (1967).
    [Crossref]
  57. C. Grein and S. John, “Polaronic band tails in disordered solids: combined effects of static randomness and electron-phonon interactions,” Phys. Rev. B 39, 1140 (1989).
    [Crossref]

2010 (3)

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

N. Sergeant, M. Agrawal, and P. Peumans, “High performance solar-selective absorbers using sub-wavelength gratings,” Opt. Express 18, 5525–5540 (2010).
[Crossref] [PubMed]

2009 (3)

2008 (3)

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
[Crossref]

S. John and R. Wang, “Metallic photonic band-gap filament architectures for optimized incandescent lighting,” Phys. Rev. A 78, 043809 (2008).
[Crossref]

2007 (5)

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

A. Luque, “Solar Thermophotovoltaics: Combining Solar Thermal andPhotovoltaics,” AIP Conf. Proc. 890, 3–16 (2007).
[Crossref]

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

S. Deshmukh and D. Vlachos, “A reduced mechanism for methane and one-step rate expressions for fuel-lean catalytic combustion of small alkanes on noble metals,” Combust. Flame 149, 366–383 (2007).
[Crossref]

2006 (2)

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

2005 (5)

I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
[Crossref]

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).

S. Kucherenko and Y. Sytsko, “Application of deterministic low-discrepancy sequences in global optimization,” Computational Optimization and Applications 30, 297–318 (2005).
[Crossref]

2004 (1)

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

2003 (3)

H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
[Crossref]

U. Ortabasi and B. Bovard, “Rugate technology for thermophotovoltaic applications: a new approach to near perfect filter performance,” AIP Conf. Proc. 653, 249–258 (2003).
[Crossref]

N. Harder and P. Wurfel, “Theoretical limits of thermophotovoltaicsolar energy conversion,” Semicond. Sci. Technol. 18, S151 (2003).
[Crossref]

2002 (2)

J. Gee, “Optically enhanced absorption in thin silicon layers using photonic crystals,” in Twenty-Ninth IEEE Photovolt. Spec. Conf., pp. 150–153 (2002).
[Crossref]

P. Wilkinson, “Photonic Bloch oscillations and Wannier-Stark ladders in exponentially chirped Bragg gratings,” Phys. Rev. E 65, 056,616 (2002).
[Crossref]

2001 (1)

J. M. Gablonsky and C. T. Kelley, “A locally-biased form of the DIRECT algorithm,” J. Global Optim. 21(1), 27–37 (2001).
[Crossref]

2000 (1)

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

1999 (5)

R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).

D. Whittaker and I. Culshaw, “Scattering-matrix treatment of patterned multilayer photonic structures,” Phys. Rev. B 60, 2610–2618 (1999).
[Crossref]

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

A. Yariv, Y. Xu, R. K. Lee, and A. Scherer, “Coupled-resonator optical waveguide: a proposal and analysis,” Opt. Lett. 24, 711–713 (1999).
[Crossref]

Q.-C. Zhang, “High efficiency Al-N cermet solar coatings with double cermet layer film structures,” J. Phys. D: Appl. Phys. 32, 1938–1944 (1999).
[Crossref]

1998 (1)

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

1996 (1)

1993 (1)

1991 (1)

J. Zhao and M. Green, “Optimized Antireflection Coatings for High-Efficiency Silicon Solar Cells,” IEEE Trans. Electron Dev. 38, 1925 (1991).
[Crossref]

1990 (1)

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

1989 (1)

C. Grein and S. John, “Polaronic band tails in disordered solids: combined effects of static randomness and electron-phonon interactions,” Phys. Rev. B 39, 1140 (1989).
[Crossref]

1985 (1)

W. Spirkl and H. Ries, “Solar thermophotovoltaics: an assessment,” J. Appl. Phys. 57, 4409–4414 (1985).
[Crossref]

1980 (1)

C. Henry, “Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells,” J. Appl. Phys. 51, 4494–4500 (1980).
[Crossref]

1967 (1)

Y. Varshni, “Temperature dependence of the energy gap in semiconductors,” Physica 34, 149–154 (1967).
[Crossref]

1963 (1)

B. Wedlock, “Thermo-photo-voltaic conversion,” Proc. IEEE 51, 694–698 (1963).
[Crossref]

Agnihotri, O.

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Agrawal, M.

Akiyama, S.

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

Algora, C.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Anikeev, S.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Avniel, Y.

Baldasaro, P.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).

Barton, P. I.

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).

Beausang, J. F.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Belenky, G. L.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Bermel, P.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

M. Ghebrebrhan, P. Bermel, Y. Avniel, J. D. Joannopoulos, and S. G. Johnson, “Global optimization of silicon photovoltaic cell front coatings,” Opt. Express 17, 7505–7518 (2009).
[Crossref] [PubMed]

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

Bett, A.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Bhatnagar, M.

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Bienstman, P.

P. Bienstman, “Rigorous and efficient modelling of wavelength scale photonic components,” Ph.D. thesis, University of Ghent, Belgium (2001).

Black, R.

R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).

Blackwell, B.

B. Blackwell, “Design, fabrication, and characterization of a micro fuel processor,” Ph.D. thesis, Massachusetts Institute of Technology (2008).

Blasi, B.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Boerner, V.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Bovard, B.

U. Ortabasi and B. Bovard, “Rugate technology for thermophotovoltaic applications: a new approach to near perfect filter performance,” AIP Conf. Proc. 653, 249–258 (2003).
[Crossref]

Bovard, B. G.

Brown, E. J.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Burger, S. R.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Celanovic, I.

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
[Crossref]

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
[Crossref]

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

Celanovic, I. L.

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

Chachuat, B.

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).

Chan, D. L.

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

Chan, W.

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

Chan, W. R.

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

Charache, G.

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).

Chen, M.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Choi, H.

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

Chou, S.

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Connors, M. K.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Corregidor, V.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Culshaw, I.

D. Whittaker and I. Culshaw, “Scattering-matrix treatment of patterned multilayer photonic structures,” Phys. Rev. B 60, 2610–2618 (1999).
[Crossref]

Danielson, L.

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

Danielson, L. R.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Dashiell, M. W.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Datas, A.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

DePoy, D.

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

DePoy, D. M.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Deshmukh, S.

S. Deshmukh and D. Vlachos, “A reduced mechanism for methane and one-step rate expressions for fuel-lean catalytic combustion of small alkanes on noble metals,” Combust. Flame 149, 366–383 (2007).
[Crossref]

Dimroth, F.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Donetski, D.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Ehsani, H.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Fan, S.

E. Rephaeli and S. Fan, “Absorber and emitter for solar thermophotovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit,” Opt. Express 17, 15,145–15,159 (2009).
[Crossref]

Fernandez, J.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Fleming, J. G.

J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
[Crossref]

Fourspring, P. M.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Gablonsky, J. M.

J. M. Gablonsky and C. T. Kelley, “A locally-biased form of the DIRECT algorithm,” J. Global Optim. 21(1), 27–37 (2001).
[Crossref]

Gee, J.

J. Gee, “Optically enhanced absorption in thin silicon layers using photonic crystals,” in Twenty-Ninth IEEE Photovolt. Spec. Conf., pp. 150–153 (2002).
[Crossref]

Gee, J. M.

J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
[Crossref]

Ghebrebrhan, M.

M. Ghebrebrhan, P. Bermel, Y. Avniel, J. D. Joannopoulos, and S. G. Johnson, “Global optimization of silicon photovoltaic cell front coatings,” Opt. Express 17, 7505–7518 (2009).
[Crossref] [PubMed]

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

Gombert, A.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Gratrix, E. J.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

Green, M.

J. Zhao and M. Green, “Optimized Antireflection Coatings for High-Efficiency Silicon Solar Cells,” IEEE Trans. Electron Dev. 38, 1925 (1991).
[Crossref]

Grein, C.

C. Grein and S. John, “Polaronic band tails in disordered solids: combined effects of static randomness and electron-phonon interactions,” Phys. Rev. B 39, 1140 (1989).
[Crossref]

Hagness, S. C.

A. Taflove and S. C. Hagness, Computational Electrodynamics, 2nd ed. (Artech House, Norwood, MA, 2000).

Harder, N.

N. Harder and P. Wurfel, “Theoretical limits of thermophotovoltaicsolar energy conversion,” Semicond. Sci. Technol. 18, S151 (2003).
[Crossref]

Heinzel, A.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Henry, C.

C. Henry, “Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells,” J. Appl. Phys. 51, 4494–4500 (1980).
[Crossref]

Herzinger, C.

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

Huang, R.

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

Huang, R. K.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Ibanescu, M.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

Jensen, C.

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

Joannopoulos, J. D.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

M. Ghebrebrhan, P. Bermel, Y. Avniel, J. D. Joannopoulos, and S. G. Johnson, “Global optimization of silicon photovoltaic cell front coatings,” Opt. Express 17, 7505–7518 (2009).
[Crossref] [PubMed]

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

John, S.

S. John and R. Wang, “Metallic photonic band-gap filament architectures for optimized incandescent lighting,” Phys. Rev. A 78, 043809 (2008).
[Crossref]

C. Grein and S. John, “Polaronic band tails in disordered solids: combined effects of static randomness and electron-phonon interactions,” Phys. Rev. B 39, 1140 (1989).
[Crossref]

Johnson, S. G.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

M. Ghebrebrhan, P. Bermel, Y. Avniel, J. D. Joannopoulos, and S. G. Johnson, “Global optimization of silicon photovoltaic cell front coatings,” Opt. Express 17, 7505–7518 (2009).
[Crossref] [PubMed]

J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).

Johs, B.

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

Jovanovic, N.

I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
[Crossref]

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

Kanamori, Y.

H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
[Crossref]

Kassakian, J.

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
[Crossref]

I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
[Crossref]

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

Kelley, C. T.

J. M. Gablonsky and C. T. Kelley, “A locally-biased form of the DIRECT algorithm,” J. Global Optim. 21(1), 27–37 (2001).
[Crossref]

Kennedy, C.

C. Kennedy, “Review of mid- to high-temperature solar selective absorber materials,” Tech. Rep. TP-520-31267, National Renewable Energy Laboratory (2002).

Kim, J. K.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Kolm, H. H.

H. H. Kolm, “Solar-battery power source,” Tech. Rep., MIT Lincoln Laboratory (1956). Quarterly Progress Report, Group 35, p. 13.

Kucherenko, S.

S. Kucherenko and Y. Sytsko, “Application of deterministic low-discrepancy sequences in global optimization,” Computational Optimization and Applications 30, 297–318 (2005).
[Crossref]

Lazo-Wasem, J. E.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

Lee, R. K.

Li, J.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Li, L.

Li, Z.

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Lightman, A.

G. Rybicki and A. Lightman, Radiative processes in astrophysics (John Wiley and Sons, 1979).

Lin, S.-Y.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
[Crossref]

Liu, W.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Luque, A.

A. Luque, “Solar Thermophotovoltaics: Combining Solar Thermal andPhotovoltaics,” AIP Conf. Proc. 890, 3–16 (2007).
[Crossref]

Luryi, S.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Luther, J.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Martin, D.

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Martinelli, R.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Masel, R.

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

McGahan, W.

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

Meade, R. D.

J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).

Miesse, C.

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

Mitsos, A.

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).

Moreno, J. B.

J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
[Crossref]

Nichols, G.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

O’Sullivan, F.

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

Ortabasi, U.

U. Ortabasi and B. Bovard, “Rugate technology for thermophotovoltaic applications: a new approach to near perfect filter performance,” AIP Conf. Proc. 653, 249–258 (2003).
[Crossref]

Oskooi, A. F.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

Pallo, N. A.

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

Paulson, W.

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

Perreault, D.

I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
[Crossref]

Perreault, D. J.

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

Peumans, P.

Pilawa-Podgurski, R. C.

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

Pincon, O.

Powell, M.

M. Powell, Advances in Optimization and Numerical Analysis (Kluwer Academic, Dordrecht, Holland, 1994).

Rahmlow, T. D.

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

Rahner, K. D.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Ransom, S.

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

Rephaeli, E.

E. Rephaeli and S. Fan, “Absorber and emitter for solar thermophotovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit,” Opt. Express 17, 15,145–15,159 (2009).
[Crossref]

Ries, H.

W. Spirkl and H. Ries, “Solar thermophotovoltaics: an assessment,” J. Appl. Phys. 57, 4409–4414 (1985).
[Crossref]

Roundy, D.

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

Rybicki, G.

G. Rybicki and A. Lightman, Radiative processes in astrophysics (John Wiley and Sons, 1979).

Sai, H.

H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
[Crossref]

Sathiaraj, T.

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Scherer, A.

Schubert, E. F.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Schubert, M. F.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Sergeant, N.

Shannon, M.

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

Sharbaty, A.

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Shellenbarger, Z. A.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Short, M.

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

Shu, C.

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Smart, J. A.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Soljacic, M.

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

Spirkl, W.

W. Spirkl and H. Ries, “Solar thermophotovoltaics: an assessment,” J. Appl. Phys. 57, 4409–4414 (1985).
[Crossref]

Sytsko, Y.

S. Kucherenko and Y. Sytsko, “Application of deterministic low-discrepancy sequences in global optimization,” Computational Optimization and Applications 30, 297–318 (2005).
[Crossref]

Sze, S.

S. Sze, Physics of Semiconductor Devices (Wiley and Sons, New York, 1981).

Taflove, A.

A. Taflove and S. C. Hagness, Computational Electrodynamics, 2nd ed. (Artech House, Norwood, MA, 2000).

Talamo, P.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Taylor, G.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Thangarj, R.

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Turner, G. W.

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Varshni, Y.

Y. Varshni, “Temperature dependence of the energy gap in semiconductors,” Physica 34, 149–154 (1967).
[Crossref]

Vlachos, D.

S. Deshmukh and D. Vlachos, “A reduced mechanism for methane and one-step rate expressions for fuel-lean catalytic combustion of small alkanes on noble metals,” Combust. Flame 149, 366–383 (2007).
[Crossref]

W. F. T.,

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

Wada, K.

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

Wang, C. A.

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

Wang, R.

S. John and R. Wang, “Metallic photonic band-gap filament architectures for optimized incandescent lighting,” Phys. Rev. A 78, 043809 (2008).
[Crossref]

Wedlock, B.

B. Wedlock, “Thermo-photo-voltaic conversion,” Proc. IEEE 51, 694–698 (1963).
[Crossref]

Whittaker, D.

D. Whittaker and I. Culshaw, “Scattering-matrix treatment of patterned multilayer photonic structures,” Phys. Rev. B 60, 2610–2618 (1999).
[Crossref]

Wilkinson, P.

P. Wilkinson, “Photonic Bloch oscillations and Wannier-Stark ladders in exponentially chirped Bragg gratings,” Phys. Rev. E 65, 056,616 (2002).
[Crossref]

Winn, J. N.

J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).

Wittwer, V.

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

Woollam, J.

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

Wurfel, P.

N. Harder and P. Wurfel, “Theoretical limits of thermophotovoltaicsolar energy conversion,” Semicond. Sci. Technol. 18, S151 (2003).
[Crossref]

Xi, J.-Q.

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Xu, Y.

Xue, H.

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Yang, W.

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Yariv, A.

Yeng, Y. X.

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

Yugami, H.

H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
[Crossref]

Yunt, M.

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

Zhang, Q.-C.

Q.-C. Zhang, “High efficiency Al-N cermet solar coatings with double cermet layer film structures,” J. Phys. D: Appl. Phys. 32, 1938–1944 (1999).
[Crossref]

Zhao, J.

J. Zhao and M. Green, “Optimized Antireflection Coatings for High-Efficiency Silicon Solar Cells,” IEEE Trans. Electron Dev. 38, 1925 (1991).
[Crossref]

AIChE J (1)

C. Miesse, R. Masel, C. Jensen, M. Shannon, and M. Short, “Submillimeter-scale combustion,” AIChE J.  50, 3206–3214 (2004).
[Crossref]

AIP Conf. Proc. (4)

U. Ortabasi and B. Bovard, “Rugate technology for thermophotovoltaic applications: a new approach to near perfect filter performance,” AIP Conf. Proc. 653, 249–258 (2003).
[Crossref]

T. D. Rahmlow, D. M. DePoy, P. M. Fourspring, H. Ehsani, J. E. Lazo-Wasem, and E. J. Gratrix, “Development of front surface, spectral control filters with greater temperature stability for thermophotovoltaic energy conversion,” AIP Conf. Proc. 890, 59–67 (2007).
[Crossref]

A. Luque, “Solar Thermophotovoltaics: Combining Solar Thermal andPhotovoltaics,” AIP Conf. Proc. 890, 3–16 (2007).
[Crossref]

A. Datas, C. Algora, V. Corregidor, D. Martin, A. Bett, F. Dimroth, and J. Fernandez, “Optimization of Germanium Cell Arrays in Tungsten Emitter-based Solar TPV Systems,” AIP Conf. Proc. 890, 227–237 (2007).
[Crossref]

Appl. Opt. (1)

Appl. Phys. Lett. (3)

C. A. Wang, H. Choi, S. Ransom, G. Charache, L. Danielson, and D. DePoy, “High-quantum-efficiency 0.5 eV GaInAsSb/GaSb thermophotovoltaic devices,” Appl. Phys. Lett. 75, 1305–1307 (1999).
[Crossref]

I. Celanovic, N. Jovanovic, and J. Kassakian, “Two-dimensional tungsten photonic crystals as selective thermal emitters,” Appl. Phys. Lett. 92, 193101 (2008).
[Crossref]

H. Sai, Y. Kanamori, and H. Yugami, “High-temperature resistive surface grating for spectral control of thermal radiation,” Appl. Phys. Lett. 82, 1685–1687 (2003).
[Crossref]

Chem. Eng. Sci. (1)

B. Chachuat, A. Mitsos, and P. I. Barton, “Optimal design and steady-state operation of micro power generation employing fuel cells,” Chem. Eng. Sci. 60 (2005).

Combust. Flame (1)

S. Deshmukh and D. Vlachos, “A reduced mechanism for methane and one-step rate expressions for fuel-lean catalytic combustion of small alkanes on noble metals,” Combust. Flame 149, 366–383 (2007).
[Crossref]

Comp. Phys. Comm. (1)

A. F. Oskooi, D. Roundy, M. Ibanescu, P. Bermel, J. D. Joannopoulos, and S. G. Johnson, “MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method,” Comp. Phys. Comm. 181, 687–702 (2010).
[Crossref]

Computational Optimization and Applications (1)

S. Kucherenko and Y. Sytsko, “Application of deterministic low-discrepancy sequences in global optimization,” Computational Optimization and Applications 30, 297–318 (2005).
[Crossref]

IEEE Trans. Electron Dev. (2)

J. Zhao and M. Green, “Optimized Antireflection Coatings for High-Efficiency Silicon Solar Cells,” IEEE Trans. Electron Dev. 38, 1925 (1991).
[Crossref]

M. W. Dashiell, J. F. Beausang, H. Ehsani, G. Nichols, D. M. DePoy, L. R. Danielson, P. Talamo, K. D. Rahner, E. J. Brown, S. R. Burger, P. M. Fourspring, W. F. T., P. Baldasaro, C. A. Wang, R. K. Huang, M. K. Connors, G. W. Turner, Z. A. Shellenbarger, G. Taylor, J. Li, R. Martinelli, D. Donetski, S. Anikeev, G. L. Belenky, and S. Luryi, “Quaternary InGaAsSb thermophotovoltaic diodes,” IEEE Trans. Electron Dev. 53, 2879–2891 (2006).
[Crossref]

International Conference on Thermoelectrics (1)

R. Black, P. Baldasaro, and G. Charache, “Thermophotovoltaics - development status and parametric considerations for power applications,” in International Conference on Thermoelectrics,  18, pp. 639–644 (1999).

J. Appl. Phys. (4)

F. O’Sullivan, I. Celanovic, N. Jovanovic, J. Kassakian, S. Akiyama, and K. Wada, “Optical characteristics of 1D Si/SiO2 photonic crystals for thermophotovoltaic applications,” J. Appl. Phys. 97, 033529 (2005).
[Crossref]

C. Herzinger, B. Johs, W. McGahan, J. Woollam, and W. Paulson, “Ellipsometric determination of optical constants for silicon and thermally grown silicon dioxide via a multi-sample, multi-wavelength, multi-angle investigation,” J. Appl. Phys. 83, 3323–3336 (1998).
[Crossref]

W. Spirkl and H. Ries, “Solar thermophotovoltaics: an assessment,” J. Appl. Phys. 57, 4409–4414 (1985).
[Crossref]

C. Henry, “Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells,” J. Appl. Phys. 51, 4494–4500 (1980).
[Crossref]

J. Global Optim. (1)

J. M. Gablonsky and C. T. Kelley, “A locally-biased form of the DIRECT algorithm,” J. Global Optim. 21(1), 27–37 (2001).
[Crossref]

J. Mod. Opt. (1)

A. Heinzel, V. Boerner, A. Gombert, B. Blasi, V. Wittwer, and J. Luther, “Radiation filters and emitters for the NIR based on periodically structured metal surfaces,” J. Mod. Opt. 47 (2000).

J. Opt. Soc. Am. A (1)

J. Phys. D: Appl. Phys. (1)

Q.-C. Zhang, “High efficiency Al-N cermet solar coatings with double cermet layer film structures,” J. Phys. D: Appl. Phys. 32, 1938–1944 (1999).
[Crossref]

Nanoscale Microscale Thermophys. Eng. (1)

H. Xue, W. Yang, S. Chou, C. Shu, and Z. Li, “Microthermophotovoltaics power system for portable MEMS devices,” Nanoscale Microscale Thermophys. Eng. 9, 85–97 (2005).
[Crossref]

Nat. Photon. (1)

J.-Q. Xi, M. F. Schubert, J. K. Kim, E. F. Schubert, M. Chen, S.-Y. Lin, W. Liu, and J. A. Smart, “Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection,” Nat. Photon. 1, 176–179 (2007).

Opt. Express (4)

Opt. Lett. (1)

Phys. Rev. A (2)

S. John and R. Wang, “Metallic photonic band-gap filament architectures for optimized incandescent lighting,” Phys. Rev. A 78, 043809 (2008).
[Crossref]

D. L. Chan, I. Celanovic, J. D. Joannopoulos, and M. Soljacic, “Emulating one-dimensional resonant Q-matching behavior in a two-dimensional system via Fano resonances,” Phys. Rev. A 74, 064901 (2006).
[Crossref]

Phys. Rev. B (3)

I. Celanovic, D. Perreault, and J. Kassakian, “Resonant-cavity enhanced thermal emission,” Phys. Rev. B 72, 075127 (2005).
[Crossref]

D. Whittaker and I. Culshaw, “Scattering-matrix treatment of patterned multilayer photonic structures,” Phys. Rev. B 60, 2610–2618 (1999).
[Crossref]

C. Grein and S. John, “Polaronic band tails in disordered solids: combined effects of static randomness and electron-phonon interactions,” Phys. Rev. B 39, 1140 (1989).
[Crossref]

Phys. Rev. E (1)

P. Wilkinson, “Photonic Bloch oscillations and Wannier-Stark ladders in exponentially chirped Bragg gratings,” Phys. Rev. E 65, 056,616 (2002).
[Crossref]

Physica (1)

Y. Varshni, “Temperature dependence of the energy gap in semiconductors,” Physica 34, 149–154 (1967).
[Crossref]

Proc. IEEE (1)

B. Wedlock, “Thermo-photo-voltaic conversion,” Proc. IEEE 51, 694–698 (1963).
[Crossref]

Process Syst. Eng. (1)

M. Yunt, B. Chachuat, A. Mitsos, and P. I. Barton, “Designing man-portable power generation systems for varying power demand,” Process Syst. Eng. 54, 1254 (2008).

Semicond. Sci. Technol. (1)

N. Harder and P. Wurfel, “Theoretical limits of thermophotovoltaicsolar energy conversion,” Semicond. Sci. Technol. 18, S151 (2003).
[Crossref]

Sol. Energy Mater. Sol. Cells (1)

W. Chan, R. Huang, C. A. Wang, J. Kassakian, J. D. Joannopoulos, and I. Celanovic, “Modeling low-bandgap thermophotovoltaic diodes for high-efficiency portable power generators,” Sol. Energy Mater. Sol. Cells 94, 509–514 (2010).
[Crossref]

Thin Solid Films (1)

T. Sathiaraj, R. Thangarj, A. Sharbaty, M. Bhatnagar, and O. Agnihotri, “Ni-Al2O3 selective cermet coatings for photochemical conversion up to 500° C,” Thin Solid Films 190, 241 (1990).
[Crossref]

Twenty-Ninth IEEE Photovolt. Spec. Conf. (1)

J. Gee, “Optically enhanced absorption in thin silicon layers using photonic crystals,” in Twenty-Ninth IEEE Photovolt. Spec. Conf., pp. 150–153 (2002).
[Crossref]

Other (13)

H. H. Kolm, “Solar-battery power source,” Tech. Rep., MIT Lincoln Laboratory (1956). Quarterly Progress Report, Group 35, p. 13.

J. M. Gee, J. B. Moreno, S.-Y. Lin, and J. G. Fleming, “Selective emitters using photonic crystals for thermophotovoltaic energy conversion,” in Twenty-ninth IEEE Photovolt. Spec. Conf. (2002).
[Crossref]

J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed. (Princeton, Princeton, NJ, 2008).

P. Bienstman, “Rigorous and efficient modelling of wavelength scale photonic components,” Ph.D. thesis, University of Ghent, Belgium (2001).

A. Taflove and S. C. Hagness, Computational Electrodynamics, 2nd ed. (Artech House, Norwood, MA, 2000).

R. C. Pilawa-Podgurski, N. A. Pallo, W. R. Chan, D. J. Perreault, and I. L. Celanovic, “Low-power maximum power point tracker with digital control for thermophotovoltaic generators,” 25th IEEE Applied Power Electronics Conference, 961–967 (2010).

B. Blackwell, “Design, fabrication, and characterization of a micro fuel processor,” Ph.D. thesis, Massachusetts Institute of Technology (2008).

G. Rybicki and A. Lightman, Radiative processes in astrophysics (John Wiley and Sons, 1979).

M. Powell, Advances in Optimization and Numerical Analysis (Kluwer Academic, Dordrecht, Holland, 1994).

ASTMG173-03, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 degree Tilted Surface (ASTM International, West Conshohocken, Pennsylvania, 2005).
[PubMed]

S. Sze, Physics of Semiconductor Devices (Wiley and Sons, New York, 1981).

M. Ghebrebrhan, P. Bermel, Y. X. Yeng, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, “Tailoring thermal emission via Q-matching of photonic crystal resonances,” (2010), to be submitted, Phys. Rev. A.

C. Kennedy, “Review of mid- to high-temperature solar selective absorber materials,” Tech. Rep. TP-520-31267, National Renewable Energy Laboratory (2002).

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (16)
Fig. 1
Fig. 1 Approaches to TPV conversion of heat to electricity. The traditional design is depicted in (a), and a novel approach based on manipulation of the photonic density of states is depicted in (b). The anticipated increase in efficiency associated with the latter approach can exceed 100%.

Download Full Size | PPT Slide | PDF

Fig. 12
Fig. 12 Optimized emittance spectra of semiconductor selective absorbers depicted in Fig. 10, as a function of angle. Note that optimized designs with one or more front coating layers see fairly constant performance up to angles of ±60°.

Download Full Size | PPT Slide | PDF

Fig. 2
Fig. 2 Design of the μTPV generator. Hydrocarbon fuel flows from a storage tank to the interior of the selective emitter and back out. The heated selective emitter then radiatively couples to the nearby TPV module to generate electricity (adapted from Ref. 31).

Download Full Size | PPT Slide | PDF

Fig. 3
Fig. 3 Three 1D structures examined as selective emitters in this work: (a) a polished Si wafer (b) a polished Si wafer with a 4-bilayer 1D PhC, and (c) a polished Si wafer with a metal layer (tungsten or platinum) and a 4-bilayer 1D PhC. Their optimized emittance spectra are shown in Fig. 4; the resulting efficiency, power (per unit area), and overall figure of merit for each structure is listed in Table 2.

Download Full Size | PPT Slide | PDF

Fig. 4
Fig. 4 Spectral emittance of four structures at 1000 K: a polished Si wafer (Fig. 3(a)), a polished Si wafer with a 4-bilayer 1D PhC (Fig. 3(b)), a polished Si wafer with tungsten and a 4-bilayer 1D PhC (Fig. 3(c)), and a platinum wafer with a 3-bilayer 1D PhC (similar to Fig. 3(c)). The efficiency, power, and overall figure of merit for each structure is listed in Table 2.

Download Full Size | PPT Slide | PDF

Fig. 6
Fig. 6 (a) Side view of the tungsten 2D PhC selective emitter, consisting of partially open cylindrical cavities supporting multiple resonant modes with a low-frequency cutoff, arranged in a 2D square array. (b) The structure depicted in (a) plus a rugate filter (depicted here with 6 distinct materials and 6 periods of periodicity p) on top, separated by an air gap.

Download Full Size | PPT Slide | PDF

Fig. 7
Fig. 7 Emissivity spectrum of three tungsten structures: two experimentally measured (flat and a 2D PhC) and one computer-optimized (a 2D PhC with larger a and r).

Download Full Size | PPT Slide | PDF

Fig. 8
Fig. 8 Spectral emittance for combined tungsten 2D PhC and rugate filter. Emitted photons with wavelengths λ < 2.23 μm (depicted in blue) are capable of being absorbed by the InGaAsSb TPV device.

Download Full Size | PPT Slide | PDF

Fig. 9
Fig. 9 Diagram of a solar TPV system. Sunlight is collected via optical concentrators and sent to a selectively absorbing surface. That structure is thermally coupled to a selective emitter, which in conjunction with a filter, thermally emits photons with energies matched to the semiconductor bandgap of the TPV cell receiving them.

Download Full Size | PPT Slide | PDF

Fig. 10
Fig. 10 Three related semiconductor selective absorbers (a) germanium wafer on a silver substrate (b) previous with a single front coating layer (c) germanium on silver with a single dielectric back coating and three front coating layers in front.

Download Full Size | PPT Slide | PDF

Fig. 13
Fig. 13 Optimized emittance spectra of the semiconductor selective absorbers depicted in Fig. 10, with silicon substituted for germanium, designed for operation under concentrated AM1.5 sunlight at 1000 K and C = 100.

Download Full Size | PPT Slide | PDF

Fig. 11
Fig. 11 Optimized emittance spectra of the semiconductor selective absorbers depicted in Fig. 10, designed for operation in unconcentrated AM1.5 sunlight at 400 K.

Download Full Size | PPT Slide | PDF

Fig. 14
Fig. 14 Optimized emittance spectra for emitters at 2360 K (left) and 1300 K (right). The corresponding efficiencies are 54.2% and 44.7%, respectively.

Download Full Size | PPT Slide | PDF

Fig. 15
Fig. 15 Optimized emittance spectra for emitters at 2360 K (left) and 1000 K (right). The corresponding efficiencies are 66.3% and 44.0%, respectively.

Download Full Size | PPT Slide | PDF

Fig. 5
Fig. 5 (Inset) Chirped rugate filter index as a function of position (using 6 materials) and (Main image) its emittance as a function of wavelength. Emitted photons with wavelengths λ < 2.23 μm (depicted in blue) are capable of being absorbed by the InGaAsSb TPV device.

Download Full Size | PPT Slide | PDF

Fig. 16
Fig. 16 Model of the dispersion of the imaginary part of the refractive index for both T = 300 K, along with a comparison to experiment [25], and projected values for T = 1000 K.

Download Full Size | PPT Slide | PDF

Tables (6)

Tables Icon

Table 1 Experimental measurements of the TPV micro-combustor system depicted in Fig. 2, with one TPV cell of area 0.5 cm2, when fueled by butane and oxygen, as a function of butane flow rate (note that all measurements yielded an open-circuit voltage Voc = 247 mV per cell). Note that Isc is the short circuit current of the cell, and FF is the fill factor, defined as the ratio of the maximum power output to the product of Isc and Voc

View Table | View all tables in this article
Tables Icon

Table 2 Predicted efficiency, power generation, and overall product figure of merit values for multiple μTPV emitter designs at 1000 K (view factor F = 0.4)

View Table | View all tables in this article
Tables Icon

Table 3 Selective absorber data for operation under unconcentrated light at 400 K

View Table | View all tables in this article
Tables Icon

Table 4 Selective absorber data for operation under 100x concentrated light at 1000 K

View Table | View all tables in this article
Tables Icon

Table 5 Selective emitter optimization results. Symbols are defined in the text; those with dimensions of length are quoted in nm, those with units of energy are quoted in eV, and those with dimensions of temperature are quoted in K. Note that different FOM values are not necessarily comparable

View Table | View all tables in this article
Tables Icon

Table 6 Selective absorber optimization results. Symbols are defined in the text; those with dimensions of length are quoted in nm and those with dimensions of temperature are quoted in K

View Table | View all tables in this article

Equations (5)

Equations on this page are rendered with MathJax. Learn more.

J ( V )   =   ∫ 0 ∞ d λ   [ 2 q c λ 4   ɛ ( λ ) EQE ( λ ) exp   ( h c / λ k T )   −   1 ]   −   [ q ( n 2   +   1 ) E g 2 k T d 4 π 2 h ¯ 3   c 2 e − E g / m k T d   +   J nr ]   ( e q V / m k T d   −   1 ) ,
η t   =   α ¯   −   ɛ ¯ σ T 4 C I
ɛ ¯   =   ∫ 0 ∞ d λ   ɛ ( λ ) / { λ 5   [ exp   ( h c / λ k T )   −   1 ] } ∫ 0 ∞ d λ / { λ 5   [ exp   ( h c / λ k T )   −   1 ] } .
E g   ( T )   =   E g   ( 0 )   −   α T 2 T   +   β ,
k ( ω )   =   { k o   exp   [ ( h ¯ ω   −   E f ) / E o ] , h ¯ ω   <   E f k o   exp   [ ( h ¯ ω   −   E f ) / α E o ] , E f   ≤   h ¯ ω   <   E f   +   2 α E o k 1   exp   [ β ( h ¯ ω   −   E g − 2 α E o ] , E f   +   2 α E o   ≤   h ¯ ω   <   E x k 2 h ¯ ω   −   E x , h ¯ ω   ≥   E x ,

Metrics

Select as filters
Select Topics Cancel
Top
       
© Copyright 2022 | Optica Publishing Group. All Rights Reserved
Privacy | Terms of Use