P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

S. Juodkazis, “Writing 3D patterns of microvessels,” Int. J. Nanomed. 2012, 3701–3702 (2012).
[Crossref]

M. Malinauskas, P. Danilevicius, and S. Juodkazis, “Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses,” Opt. Express 19, 5602–5610 (2011).
[Crossref] [PubMed]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

H. Selvaraj, B. Tan, and K. Venkatakrishnan, “Maskless direct micro-structuring of pdms by femtosecond laser localized rapid curing,” J. Micromech. Microeng. 21, 075018 (2011).
[Crossref]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

N.-T. Nguyen, “Micro-optofluidic lenses: a review,” Biomicrofluidics 4, 031501 (2010).
[Crossref] [PubMed]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, and H. Misawa, “Three-dimensional laser structuring of materials at tight focusing,” Chin. Opt. Lett. 5, S198–200 (2007).

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

C. LaFratta, L. Li, and J. Fourkas, “Soft-lithographic replication of 3d microstructures with closed loops,” PNAS 103, 8589–8594 (2006).
[Crossref] [PubMed]

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

T. Hasegawa, K. Oishi, and S. Maruo, “Three-dimensional microstructuring of PDMS by two-photon microstereolithography,” IEEE 06, 158–161 (2006).

A. Werber and H. Zappe, “Tunable microfluidic microlenses,” Appl. Opt. 44, 3238–3245 (2005).
[Crossref] [PubMed]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

C. Coenjarts and C. Ober, “Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers,” Chem. Mater. 16, 5556–5558 (2004).
[Crossref]

E. Leclerc, Y. Sakai, and T. Fujii, “Cell culture in 3-dimensional microfluidic structure of PDMS (polydimethylsiloxane),” Biomed. Microdev. 5, 109–114 (2003).
[Crossref]

S. Maruo, K. Ikuta, and H. Korogi, “Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography,” J. Microelectromechanic. Syst. 12, 533–539 (2003).
[Crossref]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

T. Thorsen, S. Maerkl, and S. Quake, “Microfluidic large scale integration,” Science 298, 580–584 (2002).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

C. Coenjarts and C. Ober, “Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers,” Chem. Mater. 16, 5556–5558 (2004).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

M. Malinauskas, P. Danilevicius, and S. Juodkazis, “Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses,” Opt. Express 19, 5602–5610 (2011).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

C. LaFratta, L. Li, and J. Fourkas, “Soft-lithographic replication of 3d microstructures with closed loops,” PNAS 103, 8589–8594 (2006).
[Crossref] [PubMed]

E. Leclerc, Y. Sakai, and T. Fujii, “Cell culture in 3-dimensional microfluidic structure of PDMS (polydimethylsiloxane),” Biomed. Microdev. 5, 109–114 (2003).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

E. G. Gamaly, Femtosecond Laser-Matter Interactions: Theory, Experiments and Applications (Pan Stanford Publishing, USA, 2011).

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

T. Hasegawa, K. Oishi, and S. Maruo, “Three-dimensional microstructuring of PDMS by two-photon microstereolithography,” IEEE 06, 158–161 (2006).

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

S. Maruo, K. Ikuta, and H. Korogi, “Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography,” J. Microelectromechanic. Syst. 12, 533–539 (2003).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

S. Juodkazis, “Writing 3D patterns of microvessels,” Int. J. Nanomed. 2012, 3701–3702 (2012).
[Crossref]

M. Malinauskas, P. Danilevicius, and S. Juodkazis, “Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses,” Opt. Express 19, 5602–5610 (2011).
[Crossref] [PubMed]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, and H. Misawa, “Three-dimensional laser structuring of materials at tight focusing,” Chin. Opt. Lett. 5, S198–200 (2007).

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

S. Maruo, K. Ikuta, and H. Korogi, “Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography,” J. Microelectromechanic. Syst. 12, 533–539 (2003).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

C. LaFratta, L. Li, and J. Fourkas, “Soft-lithographic replication of 3d microstructures with closed loops,” PNAS 103, 8589–8594 (2006).
[Crossref] [PubMed]

E. Leclerc, Y. Sakai, and T. Fujii, “Cell culture in 3-dimensional microfluidic structure of PDMS (polydimethylsiloxane),” Biomed. Microdev. 5, 109–114 (2003).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

C. LaFratta, L. Li, and J. Fourkas, “Soft-lithographic replication of 3d microstructures with closed loops,” PNAS 103, 8589–8594 (2006).
[Crossref] [PubMed]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

T. Thorsen, S. Maerkl, and S. Quake, “Microfluidic large scale integration,” Science 298, 580–584 (2002).
[Crossref] [PubMed]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

M. Malinauskas, P. Danilevicius, and S. Juodkazis, “Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses,” Opt. Express 19, 5602–5610 (2011).
[Crossref] [PubMed]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

T. Hasegawa, K. Oishi, and S. Maruo, “Three-dimensional microstructuring of PDMS by two-photon microstereolithography,” IEEE 06, 158–161 (2006).

S. Maruo, K. Ikuta, and H. Korogi, “Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography,” J. Microelectromechanic. Syst. 12, 533–539 (2003).
[Crossref]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, and H. Misawa, “Three-dimensional laser structuring of materials at tight focusing,” Chin. Opt. Lett. 5, S198–200 (2007).

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

N.-T. Nguyen, “Micro-optofluidic lenses: a review,” Biomicrofluidics 4, 031501 (2010).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, and H. Misawa, “Three-dimensional laser structuring of materials at tight focusing,” Chin. Opt. Lett. 5, S198–200 (2007).

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

C. Coenjarts and C. Ober, “Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers,” Chem. Mater. 16, 5556–5558 (2004).
[Crossref]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

T. Hasegawa, K. Oishi, and S. Maruo, “Three-dimensional microstructuring of PDMS by two-photon microstereolithography,” IEEE 06, 158–161 (2006).

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

T. Thorsen, S. Maerkl, and S. Quake, “Microfluidic large scale integration,” Science 298, 580–584 (2002).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

E. Leclerc, Y. Sakai, and T. Fujii, “Cell culture in 3-dimensional microfluidic structure of PDMS (polydimethylsiloxane),” Biomed. Microdev. 5, 109–114 (2003).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

H. Selvaraj, B. Tan, and K. Venkatakrishnan, “Maskless direct micro-structuring of pdms by femtosecond laser localized rapid curing,” J. Micromech. Microeng. 21, 075018 (2011).
[Crossref]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

H. Selvaraj, B. Tan, and K. Venkatakrishnan, “Maskless direct micro-structuring of pdms by femtosecond laser localized rapid curing,” J. Micromech. Microeng. 21, 075018 (2011).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

T. Thorsen, S. Maerkl, and S. Quake, “Microfluidic large scale integration,” Science 298, 580–584 (2002).
[Crossref] [PubMed]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

H. Selvaraj, B. Tan, and K. Venkatakrishnan, “Maskless direct micro-structuring of pdms by femtosecond laser localized rapid curing,” J. Micromech. Microeng. 21, 075018 (2011).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

A. Werber and H. Zappe, “Tunable microfluidic microlenses,” Appl. Opt. 44, 3238–3245 (2005).
[Crossref] [PubMed]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

A. Werber and H. Zappe, “Tunable microfluidic microlenses,” Appl. Opt. 44, 3238–3245 (2005).
[Crossref] [PubMed]

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. Löbler, K. Sternberg, K.-P. Schmitz, and A. Haverich, “Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications,” Acta Biomater. 7, 967–974 (2011).
[Crossref]

G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, “Three-dimensional nanostructures for photonics,” Adv. Funct. Mater. 20, 1038–1052 (2010).
[Crossref]

B. Gates, Q. Xu, J. Love, D. Wolfe, and G. Whitesides, “Unconventional nanofabrication,” Annu. Rev. Mater. Res. 34, 339–372 (2004).
[Crossref]

A. Werber and H. Zappe, “Tunable microfluidic microlenses,” Appl. Opt. 44, 3238–3245 (2005).
[Crossref] [PubMed]

S. Juodkazis, A. V. Rode, E. G. Gamaly, S. Matsuo, and H. Misawa, “Recording and reading of three-dimensional optical memory in glasses,” Appl. Phys. B 77, 361–368 (2003).
[Crossref]

E. Brasselet, M. Malinauskas, A. Žukauskas, and S. Juodkazis, “Photopolymerized microscopic vortex beam generators: precise delivery of optical orbital angular momentum,” Appl. Phys. Let. 97, 211108 (2010).
[Crossref]

S. Juodkazis, V. Mizeikis, K. K. Seet, H. Misawa, and U. G. K. Wegst, “Mechanical properties and tuning of three-dimensional polymeric photonic crystals,” Appl. Phys. Lett. 91, 241904 (2007).
[Crossref]

S. Turunen, E. Kapyla, K. Terzaki, J. Viitanen, C. Fotakis, M. Kellomaki, and M. Farsari, “Pico- and femtosecond laser-induced crosslinking of protein microstructures: evaluation of processability and bioactivity,” Biofabrication p. 045002 (2011).
[Crossref] [PubMed]

C. Williams, A. Malika, T. Kima, P. Mansonb, and J. Elisseeffa, “Variable cytocompatibility of six cell lines with photoinitiators used for polymerizing hydrogels and cell encapsulation,” Biomaterials 26, 12111218 (2005).
[Crossref]

E. Leclerc, Y. Sakai, and T. Fujii, “Cell culture in 3-dimensional microfluidic structure of PDMS (polydimethylsiloxane),” Biomed. Microdev. 5, 109–114 (2003).
[Crossref]

N.-T. Nguyen, “Micro-optofluidic lenses: a review,” Biomicrofluidics 4, 031501 (2010).
[Crossref] [PubMed]

S. Juodkazis, V. Mizeikis, S. Matsuo, K. Ueno, and H. Misawa, “Three-dimensional micro- and nano-structuring of materials by tightly focused laser radiation,” Bull. Chem. Soc. Jpn. 81, 411–448 (2008).
[Crossref]

C. Coenjarts and C. Ober, “Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers,” Chem. Mater. 16, 5556–5558 (2004).
[Crossref]

S. Juodkazis, K. Nishimura, and H. Misawa, “Three-dimensional laser structuring of materials at tight focusing,” Chin. Opt. Lett. 5, S198–200 (2007).

T. Hasegawa, K. Oishi, and S. Maruo, “Three-dimensional microstructuring of PDMS by two-photon microstereolithography,” IEEE 06, 158–161 (2006).

C. Schizas, V. Melissinaki, A. Gaidukeviciute, C. Reinhardt, C. Ohrt, V. Dedoussis, B. Chichkov, C. Fotakis, M. Farsari, and D. Karalekas, “On the design and fabrication by two-photon polymerization of a readily assembled micro-valve,” Int. J. Adv. Manuf. Technol. 48, 435–441 (2010).
[Crossref]

S. Juodkazis, “Writing 3D patterns of microvessels,” Int. J. Nanomed. 2012, 3701–3702 (2012).
[Crossref]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Jarasiene, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, and M. Malinauskas, “Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering,” J. Biomed. Optics 17, 081405 (2012).
[Crossref]

S. Maruo, K. Ikuta, and H. Korogi, “Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography,” J. Microelectromechanic. Syst. 12, 533–539 (2003).
[Crossref]

H. Selvaraj, B. Tan, and K. Venkatakrishnan, “Maskless direct micro-structuring of pdms by femtosecond laser localized rapid curing,” J. Micromech. Microeng. 21, 075018 (2011).
[Crossref]

J. Lotters, W. Olthuis, P. Veltink, and P. Bergveld, “The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications,” J. Micromech. Microeng. 7, 145–147 (2006).
[Crossref]

M. Malinauskas, A. Zukauskas, V. Purlys, K. Belazaras, A. Momot, D. Paipulas, R. Gadonas, A. Piskarskas, H. Gilbergs, A. Gaidukeviciute, I. Sakellari, M. Farsari, and S. Juodkazis, “Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization,” J. Opt. 12, 124010 (2010).
[Crossref]

J. Lee, X. Jiang, D. Ryan, and G. Whitesides, “Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane),” Langmuir 20, 11684–11691 (2004).
[Crossref] [PubMed]

F. Claeyssens, E. A. Hasan, A. Gaidukevičiūtė, D. S. Achilleos, A. Ranella, C. Reinhardt, A. Ovsianikov, X. Shizhou, C. Fotakis, M. Vamvakaki, B. N. Chichkov, and M. Farsari, “Production of biodegradable tissue engineering scaffold materials via 2-photon polymerisation,” Langmuir 25, 3219–3223 (2009).
[Crossref] [PubMed]

M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukevičiutė, and R. Gadonas, “Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers,” Lith. J. Phys. 50, 201–208 (2010).
[Crossref]

M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys, and R. Gadonas, “Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption,” Lith. J. Phys. 50, 135–140 (2010).
[Crossref]

M. Malinauskas, G. Kiršanskė, S. Rekštytė, T. Jonavičius, E. Kaziulionytė, L. Jonušauskas, A. Žukauskas, R. Gadonas, and A. Piskarskas, “Nanophotonic lithography: A versatile tool for manufacturing functional three-dimensional micro-/nano-objects,” Lith. J. Phys. 52, 312–326 (2012).
[Crossref]

J.-H. Jang, C. Ullal, T. Gorishnyy, V. Tsukruk, and E.L. Thomas, “Mechanically tunable three-dimensional elastomeric network/air structures via interference lithography,” Nano Lett. 6, 740–743 (2006).
[Crossref] [PubMed]

Y.-L. Zhang, Q.-D. Chen, H. Xia, and H.-B. Sun, “Designable 3D nanofabrication by femtosecond laser direct writing,” Nano Today 5, 435–448 (2010).
[Crossref]

Y. Li, F. Qi, H. Yang, Q. Gong, X. Dong, and X. Duan, “Nonuniform shrinkage and stretching of plymerized nanostructures fabricated by two-photon photopolymerization,” Nanotechnology 19, 055303 (2008).
[Crossref] [PubMed]

Y. Li, H. Cui, F. Qi, H. Yang, and Q. Gong, “Uniform suspended nanorods fabricated by bidirectional scanning via two-photon photopolymerization,” Nanotechnology 19, 375304 (2008).
[Crossref] [PubMed]

K. Hatanaka, T. Ida, H. Ono, S.-I. Matsushima, H. Fukumura, S. Juodkazis, and H. Misawa, “Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses,” Opt. Express 16, 12650–12657 (2008).
[Crossref] [PubMed]

S. Juodkazis, Y. Nishi, H. Misawa, V. Mizeikis, O. Schecker, R. Waitz, P. Leiderer, and E. Scheer, “Optical transmission and laser structuring of silicon membranes,” Opt. Express 17, 15308–15317 (2009).
[Crossref] [PubMed]

M. Malinauskas, A. Žukauskas, G. Bičkauskaitė, R. Gadonas, and S. Juodkazis, “Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses,” Opt. Express 18, 10209–10221 (2010).
[Crossref] [PubMed]

M. Malinauskas, P. Danilevicius, and S. Juodkazis, “Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses,” Opt. Express 19, 5602–5610 (2011).
[Crossref] [PubMed]

P. Danilevicius, S. Rekstyte, E. Balciunas, A. Kraniauskas, R. Sirmenis, D. Baltriukiene, V. Bukelskiene, R. Gadonas, V. Sirvydis, A. Piskarskas, and M. Malinauskas, “Laser 3D micro/nanofabrication of polymers for tissue engineering applications,” Opt. Laser Technol. 45, 518–524 (2013).
[Crossref]

K. Takada, D. Wu, Q.-D. Chen, S. Shoji, H. Xia, S. Kawata, and H.-B. Sun, “Size-dependent behaviors of femtosecond laser-prototyped polymer micronanowires,” Opt. Lett. 34, 566–568 (2009).
[Crossref] [PubMed]

J. Trull, L. Maigyte, V. Mizeikis, M. Malinauskas, S. Juodkazis, C. Cojocaru, M. Rutkauskas, M. Peckus, V. Sirutkaitis, and K. Staliunas, “Formation of collimated beams behind the woodpile photonic crystal,” Phys. Rev. A 84, 033812 (2011).
[Crossref]

E. Gamaly, S. Juodkazis, V. Mizeikis, H. Misawa, A. Rode, and W. Krolokowski, “Modification of refractive index by a single fs-pulse confined inside a bulk of a photo-refractive crystal,” Phys. Rev. B 81, 054113 (2010).
[Crossref]

E. E. Gamaly, S. Juodkazis, K. Nishimura, H. Misawa, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-matter interaction in a bulk of a transparent solid: confined micro-explosion and void formation,” Phys. Rev. B 73, 214101 (2006).
[Crossref]

S. Juodkazis, K. Nishimura, S. Tanaka, H. Misawa, E. E. Gamaly, B. Luther-Davies, L. Hallo, P. Nicolai, and V. Tikhonchuk, “Laser-induced microexplosion confined in the bulk of a sapphire crystal: Evidence of multi-megabar pressures,” Phys. Rev. Lett. 96, 166101 (2006).
[Crossref] [PubMed]

C. LaFratta, L. Li, and J. Fourkas, “Soft-lithographic replication of 3d microstructures with closed loops,” PNAS 103, 8589–8594 (2006).
[Crossref] [PubMed]

D. Lipomi, R. Martinez, L. Cademartiri, and G. Whitesides, “Soft lithographic approaches to nanofabrication,” Polymer Sci. 7, 211–231 (2012).

T. Thorsen, S. Maerkl, and S. Quake, “Microfluidic large scale integration,” Science 298, 580–584 (2002).
[Crossref] [PubMed]

3DPoli@gmail.com.

E. G. Gamaly, Femtosecond Laser-Matter Interactions: Theory, Experiments and Applications (Pan Stanford Publishing, USA, 2011).