S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

H. J. Jeong, H. Yoo, and D. Gweon, “High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens,” Opt. Express 24(4), 3806–3816 (2016).
[Crossref]

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

P. Pokorny and A. Miks, “3D optical two-mirror scanner with focus-tunable lens,” Appl. Opt. 54(22), 6955–6960 (2015).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

P. Hong-Seok and S. Chintal, “Development of High Speed and High Accuracy 3D Dental Intra Oral Scanner,” Procedia Eng. 100, 1174–1181 (2015).
[Crossref]

S. Ting-shu and S. Jian, “Intraoral Digital Impression Technique: A Review,” J Prosthodont. 24(4), 313–321 (2015).
[Crossref]

C. M. Belcher, S. W. Punyasena, and M. Sivaguru, “Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal,” PLoS One 8(8), e72265 (2013).
[Crossref]

H. Leeghim, M. Ahn, and K. Kim, “Novel approach to optical profiler with gradient focal point methods,” Opt. Express 20(21), 23061–23073 (2012).
[Crossref]

W. Kaplonek and K. Nadolny, “Advanced 3D laser microscopy for measurements and analysis of vitrified bonded abrasive tools,” J. Eng. Sci. Technol. 7(6), 661–678 (2012).

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

S. Lawman and H. Liang, “High precision dynamic multi-interface profilometry with optical coherence tomography,” Appl. Opt. 50(32), 6039–6048 (2011).
[Crossref]

T. Wilson, “Resolution and optical sectioning in the confocal microscope,” J. Microsc. 244(2), 113–121 (2011).
[Crossref]

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).
[Crossref]

P. Furrer and R. Gurny, “Recent advances in confocal microscopy for studying drug delivery to the eye: concepts and pharmaceutical applications,” Eur. J. Pharm. Biopharm. 74(1), 33–40 (2010).
[Crossref]

B. S. Chun, K. Kim, and D. Gweon, “Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope,” Rev. Sci. Instrum. 80(7), 073706 (2009).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

G. Sansoni, M. Trebeschi, and F. Docchio, “State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation,” Sensors 9(1), 568–601 (2009).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

J. A. Conchello and J. W. Lichtman, “Optical sectioning microscopy,” Nat. Methods 2(12), 920–931 (2005).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

L. Yu and M. K. Kim, “Full-color three-dimensional microscopy by wide-field optical coherence tomography,” Opt. Express 12(26), 6632–6641 (2004).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

M. Ishihara and H. Sasaki, “High-speed surface measurement using a non-scanning multiple-beam confocal microscope,” Opt. Eng. 38(6), 1035–1040 (1999).
[Crossref]

H.-J. Jordan, M. Wegner, and H. Tiziani, “Highly accurate non-contact characterization of engineering surfaces using confocal microscopy,” Meas. Sci. Technol. 9(7), 1142–1151 (1998).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

L. Deck and P. de Groot, “High-speed noncontact profiler based on scanning white-light interferometry,” Appl. Opt. 33(31), 7334–7338 (1994).
[Crossref]

J.-A. Conchello and J. W. Lichtman, “Theoretical analysis of a rotating-disk partially confocal scanning microscope,” Appl. Opt. 33(4), 585–596 (1994).
[Crossref]

K. Carlsson and N. Åslund, “Confocal imaging for 3-D digital microscopy,” Appl. Opt. 26(16), 3232–3238 (1987).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

D. K. Hamilton and T. Wilson, “Three-dimensional surface measurement using the confocal scanning microscope,” Appl. Phys. B: Photophys. Laser Chem. 27(4), 211–213 (1982).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

H. Leeghim, M. Ahn, and K. Kim, “Novel approach to optical profiler with gradient focal point methods,” Opt. Express 20(21), 23061–23073 (2012).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

K. Carlsson and N. Åslund, “Confocal imaging for 3-D digital microscopy,” Appl. Opt. 26(16), 3232–3238 (1987).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

C. M. Belcher, S. W. Punyasena, and M. Sivaguru, “Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal,” PLoS One 8(8), e72265 (2013).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

K. Carlsson and N. Åslund, “Confocal imaging for 3-D digital microscopy,” Appl. Opt. 26(16), 3232–3238 (1987).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

P. Hong-Seok and S. Chintal, “Development of High Speed and High Accuracy 3D Dental Intra Oral Scanner,” Procedia Eng. 100, 1174–1181 (2015).
[Crossref]

B. S. Chun, K. Kim, and D. Gweon, “Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope,” Rev. Sci. Instrum. 80(7), 073706 (2009).
[Crossref]

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

J. A. Conchello and J. W. Lichtman, “Optical sectioning microscopy,” Nat. Methods 2(12), 920–931 (2005).
[Crossref]

J.-A. Conchello and J. W. Lichtman, “Theoretical analysis of a rotating-disk partially confocal scanning microscope,” Appl. Opt. 33(4), 585–596 (1994).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

L. Deck and P. de Groot, “High-speed noncontact profiler based on scanning white-light interferometry,” Appl. Opt. 33(31), 7334–7338 (1994).
[Crossref]

L. Deck and P. de Groot, “High-speed noncontact profiler based on scanning white-light interferometry,” Appl. Opt. 33(31), 7334–7338 (1994).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

G. Sansoni, M. Trebeschi, and F. Docchio, “State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation,” Sensors 9(1), 568–601 (2009).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

P. Furrer and R. Gurny, “Recent advances in confocal microscopy for studying drug delivery to the eye: concepts and pharmaceutical applications,” Eur. J. Pharm. Biopharm. 74(1), 33–40 (2010).
[Crossref]

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

M. Gu, Principles of Three-Dimensional Imaging in Confocal Microscopes, Principles of Three-Dimensional Imaging in Confocal Microscopes (World Scientific, 1996).

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

P. Furrer and R. Gurny, “Recent advances in confocal microscopy for studying drug delivery to the eye: concepts and pharmaceutical applications,” Eur. J. Pharm. Biopharm. 74(1), 33–40 (2010).
[Crossref]

H. J. Jeong, H. Yoo, and D. Gweon, “High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens,” Opt. Express 24(4), 3806–3816 (2016).
[Crossref]

B. S. Chun, K. Kim, and D. Gweon, “Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope,” Rev. Sci. Instrum. 80(7), 073706 (2009).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

D. K. Hamilton and T. Wilson, “Three-dimensional surface measurement using the confocal scanning microscope,” Appl. Phys. B: Photophys. Laser Chem. 27(4), 211–213 (1982).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

P. Hong-Seok and S. Chintal, “Development of High Speed and High Accuracy 3D Dental Intra Oral Scanner,” Procedia Eng. 100, 1174–1181 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

M. Ishihara and H. Sasaki, “High-speed surface measurement using a non-scanning multiple-beam confocal microscope,” Opt. Eng. 38(6), 1035–1040 (1999).
[Crossref]

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

H. J. Jeong, H. Yoo, and D. Gweon, “High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens,” Opt. Express 24(4), 3806–3816 (2016).
[Crossref]

S. Ting-shu and S. Jian, “Intraoral Digital Impression Technique: A Review,” J Prosthodont. 24(4), 313–321 (2015).
[Crossref]

H.-J. Jordan, M. Wegner, and H. Tiziani, “Highly accurate non-contact characterization of engineering surfaces using confocal microscopy,” Meas. Sci. Technol. 9(7), 1142–1151 (1998).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

W. Kaplonek and K. Nadolny, “Advanced 3D laser microscopy for measurements and analysis of vitrified bonded abrasive tools,” J. Eng. Sci. Technol. 7(6), 661–678 (2012).

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

H. Leeghim, M. Ahn, and K. Kim, “Novel approach to optical profiler with gradient focal point methods,” Opt. Express 20(21), 23061–23073 (2012).
[Crossref]

B. S. Chun, K. Kim, and D. Gweon, “Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope,” Rev. Sci. Instrum. 80(7), 073706 (2009).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

L. Yu and M. K. Kim, “Full-color three-dimensional microscopy by wide-field optical coherence tomography,” Opt. Express 12(26), 6632–6641 (2004).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

Eckart Uhlmann, Dirk Oberschmidt, and Gerald Kunath-Fandrei, “3D-analysis of microstructures with confocal laser scanning microscopy,” in Machines and processes for micro-scale and meso-scale fabrication, metrology and assembly, (American Society for Precision Engineering, 2003), 93–97.

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

S. Lawman and H. Liang, “High precision dynamic multi-interface profilometry with optical coherence tomography,” Appl. Opt. 50(32), 6039–6048 (2011).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

H. Leeghim, M. Ahn, and K. Kim, “Novel approach to optical profiler with gradient focal point methods,” Opt. Express 20(21), 23061–23073 (2012).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

Z. Zhang and C. Li, “Defect Inspection for Curved Surface with Highly Specular Reflection,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 251–317.

S. Lawman and H. Liang, “High precision dynamic multi-interface profilometry with optical coherence tomography,” Appl. Opt. 50(32), 6039–6048 (2011).
[Crossref]

J. A. Conchello and J. W. Lichtman, “Optical sectioning microscopy,” Nat. Methods 2(12), 920–931 (2005).
[Crossref]

J.-A. Conchello and J. W. Lichtman, “Theoretical analysis of a rotating-disk partially confocal scanning microscope,” Appl. Opt. 33(4), 585–596 (1994).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

M. Munaro, E. W. Y. So, S. Tonello, and E. Menegatti, “Efficient Completeness Inspection Using Real-Time 3D Color Reconstruction with a Dual-Laser Triangulation System,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 201–225.

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

P. Pokorny and A. Miks, “3D optical two-mirror scanner with focus-tunable lens,” Appl. Opt. 54(22), 6955–6960 (2015).
[Crossref]

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

M. Munaro, E. W. Y. So, S. Tonello, and E. Menegatti, “Efficient Completeness Inspection Using Real-Time 3D Color Reconstruction with a Dual-Laser Triangulation System,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 201–225.

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

W. Kaplonek and K. Nadolny, “Advanced 3D laser microscopy for measurements and analysis of vitrified bonded abrasive tools,” J. Eng. Sci. Technol. 7(6), 661–678 (2012).

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

Eckart Uhlmann, Dirk Oberschmidt, and Gerald Kunath-Fandrei, “3D-analysis of microstructures with confocal laser scanning microscopy,” in Machines and processes for micro-scale and meso-scale fabrication, metrology and assembly, (American Society for Precision Engineering, 2003), 93–97.

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

P. Pokorny and A. Miks, “3D optical two-mirror scanner with focus-tunable lens,” Appl. Opt. 54(22), 6955–6960 (2015).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

C. M. Belcher, S. W. Punyasena, and M. Sivaguru, “Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal,” PLoS One 8(8), e72265 (2013).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

G. Sansoni, M. Trebeschi, and F. Docchio, “State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation,” Sensors 9(1), 568–601 (2009).
[Crossref]

M. Ishihara and H. Sasaki, “High-speed surface measurement using a non-scanning multiple-beam confocal microscope,” Opt. Eng. 38(6), 1035–1040 (1999).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

C. Sheppard and D. Shotton, Confocal Laser Scanning Microscopy (BIOS Scientific Publishers, 1997).

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

C. Sheppard and D. Shotton, Confocal Laser Scanning Microscopy (BIOS Scientific Publishers, 1997).

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

C. M. Belcher, S. W. Punyasena, and M. Sivaguru, “Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal,” PLoS One 8(8), e72265 (2013).
[Crossref]

M. Munaro, E. W. Y. So, S. Tonello, and E. Menegatti, “Efficient Completeness Inspection Using Real-Time 3D Color Reconstruction with a Dual-Laser Triangulation System,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 201–225.

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

S. Ting-shu and S. Jian, “Intraoral Digital Impression Technique: A Review,” J Prosthodont. 24(4), 313–321 (2015).
[Crossref]

H.-J. Jordan, M. Wegner, and H. Tiziani, “Highly accurate non-contact characterization of engineering surfaces using confocal microscopy,” Meas. Sci. Technol. 9(7), 1142–1151 (1998).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

M. Munaro, E. W. Y. So, S. Tonello, and E. Menegatti, “Efficient Completeness Inspection Using Real-Time 3D Color Reconstruction with a Dual-Laser Triangulation System,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 201–225.

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

G. Sansoni, M. Trebeschi, and F. Docchio, “State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation,” Sensors 9(1), 568–601 (2009).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

Eckart Uhlmann, Dirk Oberschmidt, and Gerald Kunath-Fandrei, “3D-analysis of microstructures with confocal laser scanning microscopy,” in Machines and processes for micro-scale and meso-scale fabrication, metrology and assembly, (American Society for Precision Engineering, 2003), 93–97.

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

H.-J. Jordan, M. Wegner, and H. Tiziani, “Highly accurate non-contact characterization of engineering surfaces using confocal microscopy,” Meas. Sci. Technol. 9(7), 1142–1151 (1998).
[Crossref]

T. Wilson, “Resolution and optical sectioning in the confocal microscope,” J. Microsc. 244(2), 113–121 (2011).
[Crossref]

D. K. Hamilton and T. Wilson, “Three-dimensional surface measurement using the confocal scanning microscope,” Appl. Phys. B: Photophys. Laser Chem. 27(4), 211–213 (1982).
[Crossref]

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

H. J. Jeong, H. Yoo, and D. Gweon, “High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens,” Opt. Express 24(4), 3806–3816 (2016).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

L. Yu and M. K. Kim, “Full-color three-dimensional microscopy by wide-field optical coherence tomography,” Opt. Express 12(26), 6632–6641 (2004).
[Crossref]

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

Z. Zhang and C. Li, “Defect Inspection for Curved Surface with Highly Specular Reflection,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 251–317.

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

J. Geng, “Structured-light 3D surface imaging: a tutorial,” Adv. Opt. Photonics 3(2), 128–160 (2011).
[Crossref]

K. Carlsson and N. Åslund, “Confocal imaging for 3-D digital microscopy,” Appl. Opt. 26(16), 3232–3238 (1987).
[Crossref]

J.-A. Conchello and J. W. Lichtman, “Theoretical analysis of a rotating-disk partially confocal scanning microscope,” Appl. Opt. 33(4), 585–596 (1994).
[Crossref]

T. Tanaami, S. Otsuki, N. Tomosada, Y. Kosugi, M. Shimizu, and H. Ishida, “High-speed 1-frame/ms scanning confocal microscope with a microlens and Nipkow disks,” Appl. Opt. 41(22), 4704–4708 (2002).
[Crossref]

L. Deck and P. de Groot, “High-speed noncontact profiler based on scanning white-light interferometry,” Appl. Opt. 33(31), 7334–7338 (1994).
[Crossref]

P. Pokorny and A. Miks, “3D optical two-mirror scanner with focus-tunable lens,” Appl. Opt. 54(22), 6955–6960 (2015).
[Crossref]

S. Cha, P. C. Lin, L. Zhu, P.-C. Sun, and Y. Fainman, “Nontranslational three-dimensional profilometry by chromatic confocal microscopy with dynamically configurable micromirror scanning,” Appl. Opt. 39(16), 2605–2613 (2000).
[Crossref]

S. Lawman and H. Liang, “High precision dynamic multi-interface profilometry with optical coherence tomography,” Appl. Opt. 50(32), 6039–6048 (2011).
[Crossref]

D. K. Hamilton and T. Wilson, “Three-dimensional surface measurement using the confocal scanning microscope,” Appl. Phys. B: Photophys. Laser Chem. 27(4), 211–213 (1982).
[Crossref]

L. Gevaux, C. Adnet, P. Séroul, R. Clerc, A. Trémeau, J. L. Perrot, and M. Hébert, “Three-dimensional hyperspectral imaging: a new method for human face acquisition,” Electronic Imaging 2018(8), 152 (2018).
[Crossref]

P. Furrer and R. Gurny, “Recent advances in confocal microscopy for studying drug delivery to the eye: concepts and pharmaceutical applications,” Eur. J. Pharm. Biopharm. 74(1), 33–40 (2010).
[Crossref]

H. Yoo, S. Lee, D. Kang, T. Kim, D. Gweon, S. Lee, and K. Kim, “Confocal Scanning Microscopy : a High-Resolution Nondestructive Surface Profiler,” Int. J. Precis. Eng. Man. 7, 3–7 (2006).

S. Ting-shu and S. Jian, “Intraoral Digital Impression Technique: A Review,” J Prosthodont. 24(4), 313–321 (2015).
[Crossref]

M. Martínez-Corral, P. Hsieh, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, and Y. Huang, “Fast Axial-Scanning Widefield Microscopy With Constant Magnification and Resolution,” J. Disp. Technol. 11(11), 913–920 (2015).
[Crossref]

W. Kaplonek and K. Nadolny, “Advanced 3D laser microscopy for measurements and analysis of vitrified bonded abrasive tools,” J. Eng. Sci. Technol. 7(6), 661–678 (2012).

S. Ceccarelli, M. Guarneri, M. F. de Collibus, M. Francucci, M. Ciaffi, and A. Danielis, “Laser Scanners for High-Quality 3D and IR Imaging in Cultural Heritage Monitoring and Documentation,” J. Imaging 4(11), 130 (2018).
[Crossref]

D. T. Fewer, S. J. Hewlett, E. M. McCabe, and J. Hegarty, “Direct-view microscopy: experimental investigation of the dependence of the optical sectioning characteristics on pinhole-array configuration,” J. Microsc. 187(1), 54–61 (1997).
[Crossref]

T. Wilson, “Resolution and optical sectioning in the confocal microscope,” J. Microsc. 244(2), 113–121 (2011).
[Crossref]

E. Stindel, J. L. Briard, P. Merloz, S. Plaweski, F. Dubrana, C. Lefevre, and J. Troccaz, “Bone Morphing: 3D Morphological Data for Total Knee Arthroplasty,” J. Prosthodontics 7(3), 156–168 (2002).
[Crossref]

H.-J. Jordan, M. Wegner, and H. Tiziani, “Highly accurate non-contact characterization of engineering surfaces using confocal microscopy,” Meas. Sci. Technol. 9(7), 1142–1151 (1998).
[Crossref]

S. Stehbens, H. Pemble, L. Murrow, and T. Wittmann, “Imaging intracellular protein dynamics by spinning disk confocal microscopy,” Methods Enzymol. 504, 293–313 (2012).
[Crossref]

J. A. Conchello and J. W. Lichtman, “Optical sectioning microscopy,” Nat. Methods 2(12), 920–931 (2005).
[Crossref]

M. Ishihara and H. Sasaki, “High-speed surface measurement using a non-scanning multiple-beam confocal microscope,” Opt. Eng. 38(6), 1035–1040 (1999).
[Crossref]

H. J. Jeong, H. Yoo, and D. Gweon, “High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens,” Opt. Express 24(4), 3806–3816 (2016).
[Crossref]

L. Yu and M. K. Kim, “Full-color three-dimensional microscopy by wide-field optical coherence tomography,” Opt. Express 12(26), 6632–6641 (2004).
[Crossref]

H. Leeghim, M. Ahn, and K. Kim, “Novel approach to optical profiler with gradient focal point methods,” Opt. Express 20(21), 23061–23073 (2012).
[Crossref]

K. Carlsson, P. E. Danielsson, R. Lenz, A. Liljeborg, L. Majlöf, and N. Åslund, “Three-dimensional microscopy using a confocal laser scanning,” Opt. Lett. 10(2), 53–55 (1985).
[Crossref]

E. Sánchez-Ortiga, C. J. R. Sheppard, G. Saavedra, M. Martínez-Corral, A. Doblas, and A. Calatayud, “Subtractive imaging in confocal scanning microscopy using a CCD camera as a detector,” Opt. Lett. 37(7), 1280–1282 (2012).
[Crossref]

Y. Zhang, A. Roshan, S. Jabari, S. A. Khiabani, F. Fathollahi, and R. K. Mishra, “Understanding the Quality of Pansharpening - A lab study,” Photogramm. Eng. Remote Sens. 82(10), 747–755 (2016).
[Crossref]

C. M. Belcher, S. W. Punyasena, and M. Sivaguru, “Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal,” PLoS One 8(8), e72265 (2013).
[Crossref]

P. Ye, J. L. Paredes, Y. Wu, C. Chen, G. R. Arce, and D. W. Prather, “Compressive Confocal Microscopy: 3D Reconstruction Algorithms,” Proc. SPIE 7210, 72100G (2009).
[Crossref]

B. Javidi, J.-Y. Son, A. Doblas, E. Sánchez-Ortiga, G. Saavedra, J. Sola-Pikabea, M. Martínez-Corral, P.-Y. Hsieh, and Y.-P. Huang, “Three-dimensional microscopy through liquid-lens axial scanning,” Proc. SPIE 9495, 949503 (2015).
[Crossref]

P. Hong-Seok and S. Chintal, “Development of High Speed and High Accuracy 3D Dental Intra Oral Scanner,” Procedia Eng. 100, 1174–1181 (2015).
[Crossref]

B. S. Chun, K. Kim, and D. Gweon, “Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope,” Rev. Sci. Instrum. 80(7), 073706 (2009).
[Crossref]

G. Sansoni, M. Trebeschi, and F. Docchio, “State-of-The-Art and Applications of 3D Imaging Sensors in Industry, Cultural Heritage, Medicine, and Criminal Investigation,” Sensors 9(1), 568–601 (2009).
[Crossref]

U. Jacobi, M. Chen, G. Frankowski, R. Sinkgraven, M. Hund, B. Rzany, W. Sterry, and J. Lademann, “In vivo determination of skin surface topography using an optical 3D device,” Skin Res Technol 10(4), 207–214 (2004).
[Crossref]

Z. Zhang and C. Li, “Defect Inspection for Curved Surface with Highly Specular Reflection,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 251–317.

M. Munaro, E. W. Y. So, S. Tonello, and E. Menegatti, “Efficient Completeness Inspection Using Real-Time 3D Color Reconstruction with a Dual-Laser Triangulation System,” in Integrated Imaging and Vision Techniques for Industrial Inspection: Advances and Applications, Z. Liu, H. Ukida, P. Ramuhalli, and K. Niel, eds. (Springer, 2015), pp. 201–225.

L. Cournoyer, M. Rioux, F. Blais, J. B. Taylor, M. Picard, C. Lahanier, J. A. Beraldin, G. Godin, and L. Borgeat, “Ultra high-resolution 3D laser color imaging of paintings: The Mona Lisa by Leonardo da Vinci,” in 7th International Conference on Lasers in the Conservation of Artworks, (Taylor & Francis Group, 2007), 435–440.

E. Mersona, A. V. Kudryab, V. A. Trachenkob, D. Mersonac, V. Danilova, and A. Vinogradov, “The Use of Confocal Laser Scanning Microscopy for the 3D Quantitative Characterization of Fracture Surfaces and Cleavage Facets,” in 21st European Conference on Fracture, 2016), 533–540.

M. Gu, Principles of Three-Dimensional Imaging in Confocal Microscopes, Principles of Three-Dimensional Imaging in Confocal Microscopes (World Scientific, 1996).

J. H. Nurre, S. Cha, P. C. Lin, L. Zhu, E. L. Botvinick, P. C. Sun, Y. Fainman, and B. D. Corner, “3D profilometry using a dynamically configurable confocal microscope,” in Three-Dimensional Image Capture and Applications II, (Jose, CA, United States, 1999), pp. 246–253.

Eckart Uhlmann, Dirk Oberschmidt, and Gerald Kunath-Fandrei, “3D-analysis of microstructures with confocal laser scanning microscopy,” in Machines and processes for micro-scale and meso-scale fabrication, metrology and assembly, (American Society for Precision Engineering, 2003), 93–97.

C. Sheppard and D. Shotton, Confocal Laser Scanning Microscopy (BIOS Scientific Publishers, 1997).

Scientific-Volume-Imaging, “Signal-to-Noise ratio”, retrieved https://svi.nl/SignalToNoiseRatio .

Optotune, “Fast electrically tunable lens EL-10-30 series”, retrieved http://www.optotune.com/ .