Abstract

We present a compact 10 kHz Ti:Sa front end relying on an original double-crystal regenerative amplifier design. This new configuration optimizes the thermal heat load management, allowing the production of a 110 nm large spectrum and maintaining a good beam profile quality. The front end delivers up to 5 W after compression, 17 fs pulses with a 170 mrad shot-to-shot residual carrier-envelope phase noise.

© 2017 Optical Society of America

CEP-stabilized, sub-18 fs, 10 kHz and TW-class 1 kHz dual output Ti:Sa laser with wavelength tunability option

A. Golinelli, X. Chen, B. Bussière, E. Gontier, P.-M. Paul, O. Tcherbakoff, P. D’Oliveira, and J.-F. Hergott
Opt. Express 27(10) 13624-13636 (2019)

0.24 TW ultrabroadband, CEP-stable multipass Ti:Sa amplifier

Mikayel Musheghyan, Fabian Lücking, Zhao Cheng, Harald Frei, and Andreas Assion
Opt. Lett. 44(6) 1464-1467 (2019)

CEP-stable high-energy ytterbium-doped fiber amplifier

M. Natile, A. Golinelli, L. Lavenu, F. Guichard, M. Hanna, Y. Zaouter, R. Chiche, X. Chen, J. F. Hergott, W. Boutu, H. Merdji, and P. Georges
Opt. Lett. 44(16) 3909-3912 (2019)

CEP-stable few-cycle pulses with more than 190 μJ of energy at 100 kHz from a noncollinear optical parametric amplifier

Federico J. Furch, Tobias Witting, Achut Giree, Chao Luan, Felix Schell, Gunnar Arisholm, Claus P. Schulz, and Marc J. J. Vrakking
Opt. Lett. 42(13) 2495-2498 (2017)

53 W average power CEP-stabilized OPCPA system delivering 5.5 TW few cycle pulses at 1 kHz repetition rate

Rimantas Budriūnas, Tomas Stanislauskas, Jonas Adamonis, Aidas Aleknavičius, Gediminas Veitas, Darius Gadonas, Stanislovas Balickas, Andrejus Michailovas, and Arūnas Varanavičius
Opt. Express 25(5) 5797-5806 (2017)