Abstract

A metal-based one-dimensional grating coupler on an x-cut lithium-niobate-on-insulator wafer structure for a polarization-independent fiber interface is designed and demonstrated. By using a metal-based plasmonic mode, the diffractive angle for the two polarized modes in the lithium niobate ridge waveguide can be tuned to be the same. The polarization dependence of the grating coupler therefore can be effectively reduced. The fabricated device exhibits −3.56-dB and −4.08-dB peak coupling losses per coupler at 1573 nm for the TE and TM modes, respectively. The polarization-dependent losses are less than 0.69 dB in a 44-nm wavelength range. The demonstrated grating coupler can serve as a polarization-independent optical fiber interface on lithium-niobate-on-insulator and facilitate on-chip polarization diversity applications.

© 2023 Optica Publishing Group

High coupling efficiency waveguide grating couplers on lithium niobate

Xuetong Zhou, Ying Xue, Fan Ye, Ziyao Feng, Yuan Li, Xiankai Sun, Kei May Lau, and Hon Ki Tsang
Opt. Lett. 48(12) 3267-3270 (2023)

High-efficiency chirped grating couplers on lithium niobate on insulator

Shuting Kang, Ru Zhang, Zhenzhong Hao, Di Jia, Feng Gao, Fang Bo, Guoquan Zhang, and Jingjun Xu
Opt. Lett. 45(24) 6651-6654 (2020)

Low-loss and broadband polarization-diversity edge coupler on a thin-film lithium niobate platform

Gengxin Chen, Kaixuan Chen, Zejie Yu, and Liu Liu
Opt. Lett. 48(15) 4145-4148 (2023)

Polarization-independent nonuniform grating couplers on silicon-on-insulator

Jeong Hwan Song, Fuad E. Doany, Ashenafi K. Medhin, Nicolas Dupuis, Benjamin G. Lee, and Frank R. Libsch
Opt. Lett. 40(17) 3941-3944 (2015)

High coupling efficiency grating couplers on lithium niobate on insulator

Inna Krasnokutska, Robert J. Chapman, Jean-Luc J. Tambasco, and Alberto Peruzzo
Opt. Express 27(13) 17681-17685 (2019)