Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Regenerative pulse amplification in the 10-kHz range

Not Accessible

Your library or personal account may give you access

Abstract

A continuously pumped Nd:YLF regenerative amplifier has been developed that can amplify 40-psec pulses at a repetition rate of greater than 10 kHz, with an average power in excess of 5 W. Pulse energies are as high as 2.0 mJ at 3 kHz and 640 μJ at 10.5 kHz. The limitation on the amplifier repetition rate that is associated with piezoelectric ringing in LiNbO3 electro-optics has been overcome by using short-pulsed electric fields (10 nsec) and proper acoustic damping. Regenerative pulse amplification, limited in repetition only by the pump rate of the gain medium, has been achieved. The high repetition rate in regenerative pulse amplification made possible by this development should prove important for signal-processing considerations in a wide variety of pulse-amplification applications.

© 1990 Optical Society of America

Full Article  |  PDF Article
More Like This
Operation of a 1-kHz pulse-pumped Ti:sapphire regenerative amplifier

G. Vaillancourt, T. B. Norris, J. S. Coe, P. Bado, and G. A. Mourou
Opt. Lett. 15(6) 317-319 (1990)

Regenerative amplification of picosecond pulses in Nd:YAG at repetition rates in the 100-kHz range

A. J. Ruggiero, N. F. Scherer, G. M. Mitchell, G. R. Fleming, and J. N. Hogan
J. Opt. Soc. Am. B 8(10) 2061-2067 (1991)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (2)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved