Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Wide-range tuning of polymer microring resonators by the photobleaching of CLD-1 chromophores

Not Accessible

Your library or personal account may give you access

Abstract

We present a simple and effective method for the postfabrication trimming of optical microresonators. We photobleach CLD-1 chromophores to tune the resonance wavelengths of polymer microring resonator optical notch filters. A maximum wavelength shift of -8.73 nm is observed. The resonators are fabricated with a soft-lithography molding technique and have an intrinsic Q value of 2.6×104 and a finesse of 9.3. The maximum extinction ratio of the resonator filters is -34 dB, indicating that the critical coupling condition has been satisfied.

© 2004 Optical Society of America

Full Article  |  PDF Article
More Like This
Analysis and demonstration of coupling control in polymer microring resonators using photobleaching

Greeshma Gupta, Ying-Hao Kuo, Hidehisa Tazawa, William H. Steier, Andrew Stapleton, and John D. O'Brien
Appl. Opt. 48(28) 5324-5336 (2009)

Replica-molded high-Q polymer microresonators

Andrea L. Martin, Deniz K. Armani, Lan Yang, and Kerry J. Vahala
Opt. Lett. 29(6) 533-535 (2004)

Ultrahigh-quality-factor silicon-on-insulator microring resonator

Jan Niehusmann, Andreas Vörckel, Peter Haring Bolivar, Thorsten Wahlbrink, Wolfgang Henschel, and Heinrich Kurz
Opt. Lett. 29(24) 2861-2863 (2004)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (3)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (1)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved