Abstract

An elastomeric grating coupler fabricated by the replica molding technique is used to measure the modal indices of a silicon-on-insulator (SOI) planar waveguide structure. Because of the van der Waals interaction between the grating mold and the waveguide, the elastomeric stamp makes conformal contact with the waveguide surface, inducing a periodic index perturbation at the contact region. The phase of the incident light is changed to match the guided modes of the waveguide. The modal and bulk indices are obtained by measuring the coupling angles. This technique serves to measure the high refractive index with a precision better than ${10}^{-3}$ and allows the elastomeric stamp to be removed without damaging the surface of the waveguide.

© 2005 Optical Society of America

Polymeric waveguide Bragg grating filter using soft lithography

Askin Kocabas and Atilla Aydinli
Opt. Express 14(22) 10228-10232 (2006)

Fabrication of an elastomeric rib waveguide Bragg grating filter

Cheng-Sheng Huang, Edwin Yue-Bun Pun, and Wei-Chih Wang
J. Opt. Soc. Am. B 26(6) 1256-1262 (2009)

Holographic grating based high sensitivity device for refractive index measurements

Domenico Donisi, Roberto Caputo, and Giovanni Cennini
Opt. Express 18(14) 15236-15241 (2010)

Omnidirectional reflector using nanoporous SiO₂ as a low-refractive-index material

J.-Q. Xi, Manas Ojha, Woojin Cho, J. L. Plawsky, W. N. Gill, Th. Gessmann, and E. F. Schubert
Opt. Lett. 30(12) 1518-1520 (2005)

Nondestructive method for the characterization of ion-implanted waveguides

Andrea Guarino and Peter Günter
Opt. Lett. 30(18) 2412-2414 (2005)