Abstract
An ultrahigh sensitivity polarimetric strain sensor is proposed based upon a four-layer D-shaped optical fiber and surface plasmon resonance (SPR) technology. In contrast to existing SPR-based sensors, which are based on changes in the refractive index of the overlayer, the sensor proposed in this study is based on the change in the refractive index of the fiber core in response to the application of an axial load. Specifically, the phase difference between the P and S waves after passing through the sensor under SPR conditions is measured using a common-path heterodyne interferometer and is used to determine the corresponding change in the refractive index of the core, from which the strain is then inversely derived. The experimental results show that the sensitivity of the proposed sensor is around , i.e., degree/strain. By contrast, that of a conventional (non-SPR) polarimetric fiber sensor is just . To the best of the authors’ knowledge, the sensor proposed in this study represents the first reported attempt to exploit the refractive index change of the core of an SPR-based fiber sensor for strain measurement purposes.
© 2011 Optical Society of America
Full Article | PDF ArticleMore Like This
Yong Wei, Chen Shi, Xiaoling Zhao, Chunlan Liu, Lingling Li, Rui Wang, Chunbiao Liu, Dong Zhu, Yu Zhang, and Zhihai Liu
Appl. Opt. 61(27) 7912-7916 (2022)
Ming-Hung Chiu, Shinn-Fwu Wang, and Rong-Seng Chang
Opt. Lett. 30(3) 233-235 (2005)
Priya Bhatia and Banshi D. Gupta
Appl. Opt. 50(14) 2032-2036 (2011)