Abstract

We report a distributed optical fiber birefringence measurement method based on homodyne Brillouin optical time-domain reflectometry (BOTDR). Unlike conventional BOTDR, which requires scanning of the local oscillator to get the Brillouin spectrum, instead we propose the beat period measurement of fast and slow components of the backscattered Brillouin signal in single-mode fibers using homodyne detection. The beat period is measured by detecting the envelope of the Brillouin beat signal, which gives the beat length at different fiber locations, so that birefringence can be calculated accordingly. The distributed birefringence of a 1.7 km SMF-28 and a 4.3 km large-effective-area fiber were measured with 0.6 m spatial resolution without frequency scanning of the Brillouin spectrum.

© 2012 Optical Society of America

Distributed strain and temperature fast measurement in Brillouin optical time-domain reflectometry based on double-sideband modulation

Jianqin Peng, Yuangang Lu, Yuyang Zhang, and Zelin Zhang
Opt. Express 30(2) 1511-1520 (2022)

Distributed fiber strain and vibration sensor based on Brillouin optical time-domain reflectometry and polarization optical time-domain reflectometry

Feng Wang, Xuping Zhang, Xiangchuan Wang, and Haisheng Chen
Opt. Lett. 38(14) 2437-2439 (2013)

Polarization averaged short-time Fourier transform technique for distributed fiber birefringence characterization using Brillouin gain

Shangran Xie, Liang Chen, and Xiaoyi Bao
Appl. Opt. 51(19) 4359-4369 (2012)

Large dynamic strain measurement via slope-assisted Brillouin optical time domain reflectometry using a frequency equalizer

Ge Liu, Dongjiang Zou, Ruoxue Wei, Tian Li, Guiguang Chen, and Junhui Hu
Opt. Lett. 48(6) 1407-1410 (2023)

Using a Mach–Zehnder-interference-based passive configuration to eliminate the polarization noise in Brillouin optical time domain reflectometry

Feng Wang, Cunlei Li, Xiaodong Zhao, and Xuping Zhang
Appl. Opt. 51(2) 176-180 (2012)