Abstract

We show that adding a thin dielectric layer with high refractive index on top of the metallic layer in surface plasmon resonance sensors in the Kretschmann–Raether configuration in the spectral mode causes a redshift of the resonance wavelength, narrowing of the resonance dip, and an enhancement to the spectral sensitivity. Surprisingly, together with the sensitivity enhancement, the dip becomes much narrower and the figure of merit is considerably improved, particularly in the IR range.

©2012 Optical Society of America

Figure of merit enhancement of surface plasmon resonance sensors using absentee layer

Zhaoyang Chen, Xin Zhao, Chengyou Lin, Shujing Chen, Liang Yin, and Yingchun Ding
Appl. Opt. 55(25) 6832-6835 (2016)

Long-range surface plasmon resonance sensor based on dielectric/silver coated hollow fiber with enhanced figure of merit

Yong-Xiang Jiang, Bing-Hong Liu, Xiao-Song Zhu, Xiao-Li Tang, and Yi-Wei Shi
Opt. Lett. 40(5) 744-747 (2015)

Sensitivity enhancement of guided-wave surface-plasmon resonance sensors

Amit Lahav, Mark Auslender, and I. Abdulhalim
Opt. Lett. 33(21) 2539-2541 (2008)

Gold–aluminum-based surface plasmon resonance sensor with a high quality factor and figure of merit for the detection of hemoglobin

Ashish Bijalwan and Vipul Rastogi
Appl. Opt. 57(31) 9230-9237 (2018)

Generalized figure of merit for plasmonic dip measurement-based surface plasmon resonance sensors

Treesukon Treebupachatsakul, Apivitch Boosamalee, Kamejira Chaithatwanitch, and Suejit Pechprasarn
Biomed. Opt. Express 13(4) 1784-1800 (2022)