Abstract

We show that direct measurement of the beam radius in Z-scan experiments using a CCD camera at the output of a $4f$-imaging system allows higher sensitivity and better accuracy than Baryscan. One of the advantages is to be insensitive to pointing instability of pulsed lasers because no hard (physical) aperture is employed as in the usual Z-scan. In addition, the numerical calculations involved here and the measurement of the beam radius are simplified since we do not measure the transmittance through an aperture and it is not subject to mathematical artifacts related to a normalization process, especially when the diffracted light intensity is very low.

© 2013 Optical Society of America

Measurements of the third- and fifth-order optical nonlinearities of water at 532 and 1064  nm using the D4σ method

Côme Schnebelin, Christophe Cassagne, Cid B. de Araújo, and Georges Boudebs
Opt. Lett. 39(17) 5046-5049 (2014)

Sensitivity optimization of the one beam Z-scan technique and a Z-scan technique immune to nonlinear absorption

José A. Dávila Pintle, Edmundo Reynoso Lara, and Marcelo D. Iturbe Castillo
Opt. Express 21(13) 15350-15363 (2013)

Picosecond nonlinear refraction measurement in single-beam open Z scan by charge-coupled device image processing

A. Marcano O., H. Maillotte, D. Gindre, and D. Métin
Opt. Lett. 21(2) 101-103 (1996)

Z-scan technique for characterizing third-order optical nonlinearity by use of quasi-one-dimensional slit beams

Bing Gu, Jun Yan, Qin Wang, Jing-Liang He, and Hui-Tian Wang
J. Opt. Soc. Am. B 21(5) 968-972 (2004)

Z-scan theory for nonlocal nonlinear media with simultaneous nonlinear refraction and nonlinear absorption

Mohammad Reza Rashidian Vaziri
Appl. Opt. 52(20) 4843-4848 (2013)