Abstract

We report the fabrication and first demonstration of an electron beam position monitor for a dielectric microaccelerator. This device is fabricated on a fused silica substrate using standard optical lithography techniques and uses the radiated optical wavelength to measure the electron beam position with a resolution of 10 μm, or 7% of the electron beam spot size. This device also measures the electron beam spot size in one dimension.

© 2014 Optical Society of America

Design of a subnanometer resolution beam position monitor for dielectric laser accelerators

Ken Soong and Robert L. Byer
Opt. Lett. 37(5) 975-977 (2012)

Beam focalization in reflection from flat dielectric subwavelength gratings

Y. C. Cheng, H. Zeng, J. Trull, C. Cojocaru, M. Malinauskas, T. Jukna, D. S. Wiersma, and K. Staliunas
Opt. Lett. 39(20) 6086-6089 (2014)

Pulse compression grating fabrication by diffractive proximity photolithography

Lorenz Stuerzebecher, Frank Fuchs, Torsten Harzendorf, and Uwe D. Zeitner
Opt. Lett. 39(4) 1042-1045 (2014)

Computer-generated holograms fabricated by direct write of positive electron-beam resist

Kristopher S. Urquhart, Robert Stein, and Sing H. Lee
Opt. Lett. 18(4) 308-310 (1993)

Fullerene-assisted electron-beam lithography for pattern improvement and loss reduction in InP membrane waveguide devices

Yuqing Jiao, Josselin Pello, Alonso Millan Mejia, Longfei Shen, Barry Smalbrugge, Erik Jan Geluk, Meint Smit, and Jos van der Tol
Opt. Lett. 39(6) 1645-1648 (2014)