Abstract
We report on a compact all-polarization-maintaining 2.05-μm chirped pulse fiber amplifier system emitting pulses at up to 1-MW peak power level at 371-fs pulse duration. The seed pulse repetition rate provided by an inhouse-built oscillator is reduced to around 1 MHz using a pulse picker. In combination with a two stage fiber amplifier, output pulse energies up to 570 nJ are obtained without the need of a high-power large-mode area amplifier. Both temporal stretching and compression of the chirped pulse amplifier design are achieved using a single chirped volume Bragg grating.
© 2015 Optical Society of America
Full Article | PDF ArticleMore Like This
M. Hemmer, D. Sánchez, M. Jelínek, Vadim Smirnov, H. Jelinkova, V. Kubeček, and J. Biegert
Opt. Lett. 40(4) 451-454 (2015)
H. Hoogland, S. Wittek, W. Hänsel, S. Stark, and R. Holzwarth
Opt. Lett. 39(23) 6735-6738 (2014)
Lorenz von Grafenstein, Martin Bock, Dennis Ueberschaer, Azize Koç, Uwe Griebner, and Thomas Elsaesser
Opt. Lett. 45(14) 3836-3839 (2020)