Abstract

Laser cutting of thin glass ($<100\mathrm{\mu m}$) has proven problematic. We describe an alternative laser scribing method that utilizes surface stress raisers. An ultrashort laser source is used to precisely pattern a plurality of aligned elliptical recesses on the glass. The apex of an ellipse concentrates applied tensile stresses. Depending on the elliptical dimensions, the stress concentration factor can be several tens of magnitude. The orientation of the ellipses defines a preferred scribing path. Tensile stress is applied orthogonally to the path and causes mode I fracture. The resulting scribe is of higher quality and strength than are possible with a full body laser cut. The optical setup is simple, low in cost, and compatible with future roll-to-roll manufacturing. The stress field around a stress raiser was analyzed using finite element method analysis. Consequently, the stress raiser process offers an alternative to other processes which employ high numerical aperture optics for thin glass scribing.

© 2015 Optical Society of America

In-depth comparison of conventional glass cutting technologies with laser-based methods by volumetric scribing using Bessel beam and rear-side machining

Juozas Dudutis, Jokūbas Pipiras, Rokas Stonys, Eimantas Daknys, Artūras Kilikevičius, Albinas Kasparaitis, Gediminas Račiukaitis, and Paulius Gečys
Opt. Express 28(21) 32133-32151 (2020)

Ultrafast laser burst-train filamentation for non-contact scribing of optical glasses

Jianzhao Li, Erden Ertorer, and Peter R. Herman
Opt. Express 27(18) 25078-25090 (2019)

Femtosecond laser writing of Bragg grating waveguide bundles in bulk glass

Markus Thiel, Günter Flachenecker, and Wolfgang Schade
Opt. Lett. 40(7) 1266-1269 (2015)

Gold triple-helix mid-infrared metamaterial by STED-inspired laser lithography

Johannes Kaschke and Martin Wegener
Opt. Lett. 40(17) 3986-3989 (2015)

3D laser-written silica glass step-index high-contrast waveguides for the 3.5  μm mid-infrared range

Javier Martínez, Airán Ródenas, Toney Fernandez, Javier R. Vázquez de Aldana, Robert R. Thomson, Magdalena Aguiló, Ajoy K. Kar, Javier Solis, and Francesc Díaz
Opt. Lett. 40(24) 5818-5821 (2015)