Abstract

This Letter presents a simple but effective method for characterizing the frequency response of broadband Mach–Zehnder optical modulators. The method measures the modulator’s direct current output versus the modulating frequency to determine the frequency response and requires no calibrated broadband photodetector or measurements of the electrical or optical spectrum or radio frequency power. Therefore, it significantly simplifies characterization. The method is suitable for in-situ measurements and can be automated.

© 2020 Optical Society of America

Extinction-ratio-independent electrical method for measuring chirp parameters of Mach–Zehnder modulators using frequency-shifted heterodyne

Shangjian Zhang, Heng Wang, Xinhai Zou, Yali Zhang, Rongguo Lu, and Yong Liu
Opt. Lett. 40(12) 2854-2857 (2015)

Calibration-free measurement of high-speed Mach–Zehnder modulator based on low-frequency detection

Shangjian Zhang, Chong Zhang, Heng Wang, Xinhai Zou, Yong Liu, and John E. Bowers
Opt. Lett. 41(3) 460-463 (2016)

Photonic compressive sensing of sparse radio frequency signals with a single dual-electrode Mach–Zehnder modulator

Bo Yang, Shuna Yang, Zizheng Cao, Jun Ou, Yanrong Zhai, and Hao Chi
Opt. Lett. 45(20) 5708-5711 (2020)

High precision frequency measurement of terahertz waves using optical combs from a Mach–Zehnder-modulator-based flat comb generator

Isao Morohashi, Ikufumi Katayama, Mayu Kirigaya, Yoshihisa Irimajiri, Norihiko Sekine, and Iwao Hosako
Opt. Lett. 44(3) 487-490 (2019)

Optical Nyquist pulse generation by using a dual-electrode Mach–Zehnder modulator

Nobuhide Yokota, Ryo Igarashi, and Hiroshi Yasaka
Opt. Lett. 42(9) 1856-1859 (2017)