Abstract

Optical isolators, while commonplace in bulk and fiber optical systems, remain a key missing component in integrated photonics. Isolation using magneto-optic materials has been difficult to integrate into complementary metal–oxide–semiconductor (CMOS) fabrication platforms, motivating the use of other paths to effective non-reciprocity such as temporal modulation. We demonstrate a non-reciprocal element comprising a pair of microring modulators and a microring phase shifter in an active silicon photonic process, which, in combination with standard bandpass filters, yields an isolator on-chip. Isolation up to 13 dB is measured with a 3 dB bandwidth of 2 GHz and insertion loss of 18 dB. We also show transmission of a 4 Gbps optical data signal through the isolator while retaining a wide-open eye diagram. This compact design, in combination with increased modulation efficiency, could enable modulator-based isolators to become a standard ‘black-box’ component in integrated photonics CMOS foundry platform component libraries.

© 2021 Optical Society of America

Compact dynamic optical isolator based on tandem phase modulators

Qian Lin, Jiahui Wang, and Shanhui Fan
Opt. Lett. 44(9) 2240-2243 (2019)

Optical isolator using two tandem phase modulators

Christopher R. Doerr, Nicolas Dupuis, and Liming Zhang
Opt. Lett. 36(21) 4293-4295 (2011)

Spectral causality-induced optical isolation in a non-Hermitian-modulated photonic cavity

Awanish Pandey
Opt. Lett. 49(6) 1587-1590 (2024)

Integrated optical isolators using electrically driven acoustic waves

Nathan Dostart, Yossef Ehrlichman, Cale Gentry, and Miloš A. Popović
Opt. Express 28(24) 36055-36069 (2020)

Integrated flexible-grid WDM transmitter using an optical frequency comb in microring modulators

Yelong Xu, Jiachuan Lin, Raphaël Dubé-Demers, Sophie LaRochelle, Leslie Rusch, and Wei Shi
Opt. Lett. 43(7) 1554-1557 (2018)