Abstract

Ti₂AlC is a kind of ternary layered structured ceramic metal compound, combining the advantages of both ceramic and metal. Herein, the saturable absorption performance of Ti₂AlC at the 1-µm wave band is investigated. The Ti₂AlC behaves with excellent saturable absorption, which has a modulation depth of 14.53% and a saturable intensity of 13.27 MW/cm². An all-normal dispersion fiber laser based on the Ti₂AlC saturable absorber (SA) is constructed. The repetition frequency of the Q switched pulses increased from 44 to 49 kHz as the pump power rose from 276 to 365 mW, and the corresponding pulse width decreased from 3.64 to 2.42 µs. The maximum output single Q switched pulse energy is as high as 169.8 nJ. Our experiments prove that the MAX phase Ti₂AlC has potential as a low-cost, simple preparation, and broadband SA material. To the best of our knowledge, this is the first demonstration of Ti₂AlC serving as a SA material achieving Q switched operation at the 1-µm wave band.

© 2022 Optica Publishing Group

Ti₂AlC-based saturable absorber for passive Q-switching of a fiber laser

Jinho Lee, Suhyoung Kwon, and Ju Han Lee
Opt. Mater. Express 9(5) 2057-2066 (2019)

Ternary chalcogenide Ta₂NiS₅ as a saturable absorber for a 1.9 μm passively Q-switched bulk laser

Bingzheng Yan, Baitao Zhang, Jingliang He, Hongkun Nie, Guoru Li, Junting Liu, Bingnan Shi, Ruihua Wang, and Kejian Yang
Opt. Lett. 44(2) 451-454 (2019)

Large-scale few-layered MoS₂ as a saturable absorber for Q-switching operation at 2.3 µm

Fangyuan Zha, Hongwei Chu, Zhongben Pan, Han Pan, Shengzhi Zhao, Ming Yang, and Dechun Li
Opt. Lett. 47(13) 3271-3274 (2022)

Q-Switched YDFL generation by a MAX phase saturable absorber

A. R. Muhammad, A. A. A. Jafry, A. M. Markom, A. H. A. Rosol, S. W. Harun, and P. Yupapin
Appl. Opt. 59(18) 5408-5414 (2020)

Passively Q-switched fiber lasers based on pure water as the saturable absorber

Tianhao Xian, Li Zhan, Lirun Gao, Wenyan Zhang, and Wenchao Zhang
Opt. Lett. 44(4) 863-866 (2019)