Abstract
We report on a simple fabrication technique for Fabry–Perot (FP) sensors formed by a microbubble within a polymer drop deposited on the tip of an optical fiber. Polydimethylsiloxane (PDMS) drops are deposited on the tips of standard single-mode fibers incorporating a layer of carbon nanoparticles (CNPs). A microbubble inside this polymer end-cap, aligned along the fiber core, can be readily generated on launching light from a laser diode through the fiber, owing to the photothermal effect produced in the CNP layer. This approach allows for the fabrication of microbubble end-capped FP sensors with reproducible performance, showing temperature sensitivities as large as 790 pm/°C, larger than those reported for regular polymer end-capped devices. We further show that these microbubble FP sensors may also prove useful for displacement measurements, with a sensitivity of ∼5.4 nm/µm.
© 2022 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Yong Hu, Heming Wei, Zhangwei Ma, Liang Zhang, Fufei Pang, and Tingyun Wang
Opt. Express 30(19) 33639-33651 (2022)
Qin Liang, Jinchao Tao, Xu Wang, Tianliang Wang, Xinyu Gao, Pengwei Zhou, Ben Xu, Chunliu Zhao, Juan Kang, Le Wang, Changyu Shen, Dongning Wang, and Yi Li
Opt. Lett. 47(18) 4806-4809 (2022)
Xue-Peng Pan, Bo Wang, Qi Guo, Shan-Ren Liu, He-Er Yang, Cai Sun, Qi-Dai Chen, Hong-Bo Sun, and Yong-Sen Yu
Opt. Lett. 47(16) 4119-4122 (2022)