Abstract

We investigate synchronous upconversion of a pulsed, tunable quantum cascade laser (QCL) in the important 5.4–10.2 µm range, with a 30 kHz, Q-switched, 1064 nm laser. The possibility to accurately control the repetition rate and pulse duration of the QCL results in a good temporal overlap with the Q-switched laser, leading to an upconversion quantum efficiency of 16% in a 10 mm-long AgGaS₂ crystal. We investigate the noise properties of the upconversion process in terms of pulse-to-pulse energy stability and timing jitter. For QCL pulses in the 30–70 ns range the upconverted pulse-to-pulse stability is approximately 1.75%. The demonstrated combination of broad tunability and high signal to noise in the system is well-suited for mid-IR spectral analysis of highly absorbing samples.

© 2022 Optica Publishing Group

Upconversion detection of long-wave infrared radiation from a quantum cascade laser

Yu-Pei Tseng, Christian Pedersen, and Peter Tidemand-Lichtenberg
Opt. Mater. Express 8(5) 1313-1321 (2018)

Broadband long-wavelength upconversion in ultra-short nonlinear crystals

Peter Tidemand-Lichtenberg and Christian Pedersen
Opt. Lett. 49(9) 2233-2236 (2024)

Quantum cascade laser-based mid-IR frequency metrology system with ultra-narrow linewidth and 1  ×  10⁻¹³-level frequency instability

Michael G. Hansen, Evangelos Magoulakis, Qun-Feng Chen, Ingo Ernsting, and Stephan Schiller
Opt. Lett. 40(10) 2289-2292 (2015)

30-THz upconversion of an AlGaAs diode laser with AgGaS2: bridging the several-terahertz frequency gap in the near infrared

D. Touahri, O. Acef, and J.-J. Zondy
Opt. Lett. 21(3) 213-215 (1996)

Electronically delay-tuned upconversion cross-correlator for characterization of mid-infrared pulses

Laurent Huot, Peter Morten Moselund, Peter Tidemand-Lichtenberg, and Christian Pedersen
Opt. Lett. 43(12) 2881-2884 (2018)