Abstract

The sensitivity of one-dimensional Bloch surface wave (BSW) sensors to external refractive index variations using Kretschmann’s configuration is calculated analytically by employing first-order perturbation theory for both TE and TM modes. This approach is then validated by comparison with both transfer matrix method simulations and experimental results for a chosen photonic crystal structure. Experimental sensitivities of (8.4±0.2)×10² and (8.4±0.4)×10² nm/RIU were obtained for the TE and TM BSW modes, corresponding to errors of 0.02% and 4%, respectively, when comparing with the perturbation theory approach. These results provide interesting insights into photonic crystal design for Bloch surface wave sensing by casting light into the important parameters related with sensor performance.

© 2023 Optica Publishing Group

From Bloch surface waves to cavity-mode resonances reaching an ultrahigh sensitivity and a figure of merit

Michal Gryga, Dalibor Ciprian, and Petr Hlubina
Opt. Lett. 48(22) 6068-6071 (2023)

Refractive index sensor based on graphene-coated photonic surface-wave resonance

Qianru Yang, Linling Qin, Guoyang Cao, Cheng Zhang, and Xiaofeng Li
Opt. Lett. 43(4) 639-642 (2018)

Sensing concept based on Bloch surface waves and wavelength interrogation

Michal Gryga, Dalibor Ciprian, and Petr Hlubina
Opt. Lett. 45(5) 1096-1099 (2020)

Sensing performance optimization of the Bloch surface wave biosensor based on the Bloch impedance-matching method

Ji Ma, Xiu-Bao Kang, and Zhi-Guo Wang
Opt. Lett. 43(21) 5375-5378 (2018)

Bloch waves at the surface of a single-layer coating D-shaped photonic crystal fiber

Esteban Gonzalez-Valencia, Ignacio Del Villar, and Pedro Torres
Opt. Lett. 45(9) 2547-2550 (2020)