Abstract
A Ge-polymer hybrid waveguide is sandwiched between an indium phosphide (InP) reflective gain chip and a fiber Bragg grating (FBG) to construct a laser system. The hybrid waveguide serves as a bridge between the gain chip and the fiber with tailored mode-field matching at both facets. The 50-nm amorphous Ge (α-Ge) layer shows a nonlinear absorption effect at 1550 nm. The hybrid waveguide is further verified by a femtosecond laser transmission experiment to show the pulse width compression effect. Such waveguide is then integrated inside the laser cavity as a passive saturable absorber to modulate the longitudinal modes for a pulsed output. This polymer-bridged mode-locked laser adopts an InP gain chip for compact assembly and also a FBG with a flexible length to adjust the pulse repetition rate. The mode-locked laser output around the designed 50 MHz repetition rate is demonstrated. The pulse width is measured as 147 ps, and the signal-to-noise ratio is larger than 50 dB. This work introduces a “ternary” mode-locked laser system, taking advantage of discrete photonic components bridged by a polymer-based waveguide. It also proves the feasibility of applying α-Ge films as practical and low-cost saturable absorbers in photonic devices.
© 2024 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Hsing-Chih Liang, Yu-Hsin Hsu, Pin-Wen Cheng, and Hai-Pang Chiang
Opt. Lett. 49(3) 662-665 (2024)
Yongjie Pu, Pan Guo, Yuan Gao, Qihao Shen, Zhicheng Zhang, Minyu Fan, and Sha Wang
Opt. Lett. 49(8) 2149-2152 (2024)
Qinghui Zeng, Ziya Tang, Deqin Ouyang, Linpeng Yu, Jiachen Wang, Xing Luo, Wenjun Dong, Peiguang Yan, Jinzhang Wang, Pengfei Wang, Qitao Lue, Chunyu Guo, and Shuangchen Ruan
Opt. Lett. 49(5) 1117-1120 (2024)