Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Demonstration of a side-pumped cross-seeded thin-slab pre-amplifier for high-power Ti:Sa laser systems

Abstract

We demonstrate a room-temperature Ti:Sapphire (Ti:Sa) amplifier that uses a cross pump-seed geometry (cross-thin-slab) to generate 30-mJ output pulses at 0.5-kHz repetition rate, and 25 mJ at 1 kHz when pumped by 100-mJ, 515-nm pulses from a diode-pumped Yb:YAG laser. The geometry allows to maintain a crystal temperature of ∼30°C using cooling water at 10°C. The amplifier is an attractive solution for use in the first stages of amplification in high peak and high average power chirped pulse amplification laser systems.

© 2022 Optica Publishing Group

Full Article  |  PDF Article
More Like This
High peak and average power Ti:sapphire thin disk amplifier with extraction during pumping

Vladimir Chvykov, Huabao Cao, Roland Nagymihaly, Mikhail P. Kalashnikov, Nikita Khodakovskiy, Richard Glassock, Lutz Ehrentraut, Matthias Schnuerer, and Károly Osvay
Opt. Lett. 41(13) 3017-3020 (2016)

Power-scalable thin-disk Ti:sapphire laser amplifier

Jianwang Jiang, Xu Zhang, Zhaohua Wang, Hao Teng, Shaobo Fang, Jiangfeng Zhu, and Zhiyi Wei
Opt. Lett. 47(21) 5634-5637 (2022)

Design of a thin disk amplifier with extraction during pumping for high peak and average power Ti:Sa systems (EDP-TD)

Vladimir Chvykov, Roland S. Nagymihaly, Huabao Cao, Mikhail Kalashnikov, and Karoly Osvay
Opt. Express 24(4) 3721-3733 (2016)

Data availability

Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (6)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (5)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.