Single-crystal GaN growth and polarity control using an E-beam evaporated aluminum layer

Mun-Do Park; Jung-Wook Min; Jun-Yeob Lee; Jeong-Hwan Park; Soo-Young Choi; Dong-Seon Lee

doi:10.1364/OME.419734

Optical Materials Express
Vol. 11,
Issue 4,
pp. 955-964
(2021)
•https://doi.org/10.1364/OME.419734

Single-crystal GaN growth and polarity control using an E-beam evaporated aluminum layer

Mun-Do Park, Jung-Wook Min, Jun-Yeob Lee, Jeong-Hwan Park, Soo-Young Choi, and Dong-Seon Lee

Open Access

Get PDF
Email
Share
Get Citation
Copy Citation Text
Mun-Do Park, Jung-Wook Min, Jun-Yeob Lee, Jeong-Hwan Park, Soo-Young Choi, and Dong-Seon Lee, "Single-crystal GaN growth and polarity control using an E-beam evaporated aluminum layer," Opt. Mater. Express 11, 955-964 (2021)

Export Citation
- BibTex
- Endnote (RIS)
- HTML
- Plain Text
Citation alert
Save article

Check for updates

More Like This

GaN quality evolution according to carrier gas for the nucleation layer and buffer layer
Wen Li, et al.
Opt. Mater. Express 9(4) 1945-1954 (2019)

Van der Waals coherent epitaxy of GaN and InGaN/GaN multi-quantum-well via a graphene inserted layer
Jiadong Yu, et al.
Opt. Mater. Express 11(12) 4118-4129 (2021)

Influence of high-temperature postgrowth annealing under different ambience on GaN quantum dots...
Zhiqiang Qi, et al.
Opt. Mater. Express 5(7) 1598-1605 (2015)

Related Topics
Table of Contents Category
- Semiconductors
Optics & Photonics Topics
?

The topics in this list come from the Optics and Photonics Topics applied to this article.

About this Article
History
- Original Manuscript: January 12, 2021
- Revised Manuscript: February 17, 2021
- Manuscript Accepted: February 24, 2021
- Published: March 4, 2021

Abstract

We report on a method for controlling the polarity of gallium nitride (GaN) using an E-beam evaporated aluminum (Al) layer on a sapphire substrate. A high-temperature nitridation process was designed to enable the amorphous Al layer to serve as a nucleation layer for single-crystal Ga-polar GaN growth. The Al layer also acts as a mask that prevents N-polar GaN growth. As a result, Ga-polar and N-polar GaN can be grown on the Al layer and sapphire surface, respectively. This method is not only advantageous for the selective polarity control but also to simplify the fabrication process of lateral polarity structures.

1. Introduction

Group-III nitrides are polar materials that exhibit both metal- and nitrogen-polarity (N-polarity) along the c-axis owing to the absence of inversion symmetry in their structure. Although there are no inherent differences in their optical and electronic properties, metal-polar III-nitrides have attracted considerably more attention than N-polar III-nitrides because their higher quality makes them suitable for application in devices. Although it is more difficult to make high quality N-polar III-nitrides, several advantages can be obtained from their inverted structures [1–3].

Lateral polarity structures, such as periodically poled structures, have forms in which metal-polar and N-polar domains are arranged side-by-side. This structure exhibits unique properties that cannot be observed in unipolar structures because of their laterally alternating polarity. For example, the sign of the second-order nonlinear susceptibility changes with polarity. This property enables the application of lateral polarity structures as quasi-phase-matched crystals for second-harmonic generation [4–6]. In addition, electrons in the metal-polar domain can be transported laterally to the N-polar domain by the in-plane potential difference between the two polar domains. This causes a large overlap of electron and hole wave functions in lateral polarity structures, enhancing the luminescence [7–9]. In addition to these applications, various studies have been reported on electronic and optoelectronic devices that use the properties of lateral polarity structures [10–13].

There are several fabrication methods for lateral polarity structures [3]. The most common method is to use a patterned aluminum nitride (AlN) nucleation layer on a sapphire substrate [14–16]. In this method, the growth of N-polar domains is induced by the surface nitridation of the sapphire substrate [17,18]. Simultaneously, a patterned AlN nucleation layer prevents the nitridation of the sapphire surface and leads to the growth of metal-polar domains on it. Another method of fabricating lateral polarity structures is to invert the polarity on unipolar III-nitride templates or substrates. In this case, the polarity of the selected area is inverted using an AlN layer, an aluminum oxide layer, or high magnesium doping [19–21]. These fabrication methods can control the polarity of III-nitrides for selective areas. However, they require additional processes such as etching and regrowth. Consequently, fabricating a lateral polarity structure is more complex, costly, and time-consuming than growing unipolar III-nitrides [22,23]. Therefore, it is necessary to simplify the polarity control process.

In this work, we present a method for controlling the polarity of GaN using an E-beam evaporated Al layer on a sapphire substrate. It has been reported that excess Al atoms can induce the growth of metal-polar III-nitrides [24,25]. This method takes advantage of this property. However, because the E-beam evaporated Al layer is amorphous, it cannot be used directly as a nucleation layer for the growth of single-crystal III-nitride, unlike the single-crystal Al layer or conventional AlN nucleation layer [26]. Therefore, we designed a high-temperature nitridation process to enable the E-beam evaporated Al layer to serve as a nucleation layer for the growth of single-crystal Ga-polar GaN. As a result, a simple, single growth process achieved the selective growth of Ga- and N-polar GaN on a patterned Al layer and a sapphire surface, respectively. This method is not only advantageous for the selective control of GaN polarity, but also to simplify the fabrication process of lateral polarity structures, compared to the conventional methods.

2. Experimental method

Polarity-controlled GaN was grown on c-plane sapphire substrates by metal–organic chemical vapor deposition (MOCVD). The sapphire substrate has a 0.2° off-cut angle toward the m-plane direction. An Al layer was deposited on the sapphire substrate by E-beam evaporation. The Al layer was exposed to air and moved to the MOCVD chamber for GaN growth. Figure 1 presents a schematic diagram of this method. This method has three steps: (1) Al layer deposition by E-beam evaporation, (2) low-temperature GaN nucleation layer growth after high-temperature nitridation, and (3) high-temperature GaN growth. Using this method, Ga-polar and N-polar GaN can be grown on the Al layer and the sapphire surface, respectively. The growth process in MOCVD is similar to general two-step N-polar GaN growth on a sapphire substrate. First, the E-beam evaporated Al layer was nitrided for 210 sec using ammonia (NH₃) at 1050°C under an N₂ atmosphere. Subsequently, a GaN nucleation layer was deposited at 550°C with a V/III ratio of 3100. Trimethylgallium (TMGa) and NH₃ were used as the Ga and N sources, respectively, with hydrogen (H₂) as the carrier gas. Finally, high-temperature GaN was grown for 30 min at 1050°C with a V/III ratio of 1400. To demonstrate that this method can control the polarity of the selected area, two types of lateral polarity structures were fabricated according to the method described above using patterned Al layers on sapphire substrates. One was fabricated using a circular patterned Al layer with a diameter of 20 µm and a pitch of 60 µm, and the other was fabricated using a striped patterned Al layer with a width of 30 µm and a pitch of 60 µm. The polarity of all GaN samples was investigated by selective etching in 2 M potassium hydroxide (KOH) solution at 75°C for 5 min. It is well known that the metal-polar surface is chemically stable to the KOH solution, while the N-polar surface is etched regardless of the growth method or condition [27,28]. The surface morphology of GaN was observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The optical properties were characterized by room-temperature photoluminescence (PL) spectroscopy using a 266-nm diode-pumped solid-state laser as the excitation source. The stress state of the GaN films was investigated by Raman spectroscopy using a 514-nm Ar-ion laser as the excitation source. The crystalline quality of the GaN films was investigated by high-resolution X-ray diffraction (XRD).

Fig. 1. Schematic diagram of a method for controlling the polarity of GaN using an E-beam evaporated aluminum (Al) layer on a sapphire substrate. The growth processes of Ga- and N-polar GaN are the same. The only difference is the deposition of an Al layer before GaN growth.

Download Full Size | PPT Slide | PDF

3. Results and discussion

Figure 2 shows SEM images of GaN grown on Al layers with different thicknesses. The GaN film grown on a sapphire substrate without an Al layer had a rough surface covered with hexagonal hillocks (Fig. 2(a)), which is a general feature of N-polar GaN [29]. This GaN film was completely etched away by the KOH solution as shown in the inset of Fig. 2(a). This shows that the GaN film grown without the Al layer had N-polarity. The thickness of this GaN varied between 1.0 and 1.4 µm depending on the position due to its hexagonal hillocks.

Fig. 2. SEM images of GaN grown on Al layers with different thicknesses: (a) without the Al layer, (b) 5 nm, (c) 10 nm, and (d) 15 nm. The inset of (a) shows the surface after potassium hydroxide (KOH) etching.

Download Full Size | PPT Slide | PDF

Figure 2(b) shows a GaN film grown on a 5-nm thick Al layer. It had a smooth surface and was stable in the KOH solution. This indicates that this GaN film had Ga-polarity. The thickness of this GaN was almost constant at 1.2 µm. Meanwhile, when the thickness of the Al layer was in the range 2–5 nm, flat GaN films could be grown on it (not shown). However, as the thickness of the Al layer went above 5 nm, pits formed on the surface, and the shape of GaN gradually changed from a film to islands. Figure 2(c) shows the GaN grown on a 10-nm thick Al layer. It had Ga-polarity but was in the form of islands that had not fully coalesced. As the thickness of the Al layer further increased to 15 nm, randomly oriented GaN islands grew on it (Fig. 2(d)). These results imply that the crystal structure of GaN gradually changed from single crystal to polycrystal as the Al layer became thicker. Since the growing GaN is affected by the crystal structure of the Al layer, it can be seen that the thicker Al layer was recrystallized into a polycrystalline layer in the high-temperature nitridation process. The formation of a polycrystalline layer can be attributed to the random nucleation and growth (RNG) during the recrystallization process. Unlike solid-phase epitaxy in which crystallization occurs at the interface during annealing, RNG occurs at randomly distributed locations and forms polycrystalline grains, which cause the growth of polycrystalline GaN [30,31]. Meanwhile, it should be noted that the formation of polycrystalline grains by RNG may be affected by both nitrogen atoms supplied by NH₃ and amorphous aluminum oxide formed on the surface of the Al layer due to its oxidation in air.

Fig. 3. AFM images and root-mean-square (RMS) roughness values: (a) Sapphire substrate, (b) Nitrided sapphire substrate, (c) 5-nm thick Al layer deposited on a sapphire substrate using E-beam evaporation, and (d) Nitrided 5-nm thick Al layer. Nitridation was conducted using NH₃ at 1050°C under an N₂ atmosphere.

Download Full Size | PPT Slide | PDF

To confirm the presence of the Al layer after high-temperature nitridation, AFM measurements were conducted. Figures 3(a) and 3(c) show the surface of the sapphire substrate and 5-nm thick Al layer deposited on the sapphire substrate, respectively. The surface of the sapphire had a smooth step-terrace structure, whereas the E-beam evaporated Al layer appeared in the form of three-dimensional (3D) islands covering the sapphire substrate. After nitridation at 1050°C under an N₂ atmosphere, the step-terrace structure of the sapphire became blurred (Fig. 3(b)). In the case of the Al layer, it did not disappear by thermal etching during the high-temperature nitridation and still existed in the form of 3D islands (Fig. 3(d)). The presence of the Al layer after high-temperature nitridation implies that the Ga-polar GaN film shown in Fig. 2(b) grew on the high-temperature nitrided Al layer instead of on the nitrided surface of the sapphire substrate.

To grow high-quality GaN film on the Al layer, we investigated the effect of high-temperature nitridation and the role of the Al layer as a nucleation layer. Figure 4(a) shows GaN grown on a 5-nm thick Al layer without high-temperature nitridation. Although the growth steps were the same except for the annealing step (high-temperature nitridation), the GaN grew in the form of islands instead of a film. This is because the Al layer did not recrystallize due to the absence of the annealing step. In the theory of solid-phase epitaxy, the annealing temperature affects the recrystallization of materials [30]. If the annealing temperature is not sufficiently high, solid-phase epitaxy will take a long time or cannot proceed. Therefore, annealing must be performed at appropriate temperatures to completely recrystallize the Al layer. To find the temperature at which recrystallization begins, GaN was grown on Al layers annealed at various temperatures with NH₃ (not shown here). From the growth results, it is estimated that the recrystallization of the E-beam evaporated Al layer begins within the temperature range 700–800°C at which morphological changes occur. However, even if recrystallization occurred, the Al layer was not sufficiently recrystallized below 900°C because recrystallization was slow at low temperatures, and thus pits formed on the GaN surface. The formation of these pits can be prevented by increasing the annealing temperature, as shown in Fig. 2(b). In addition to annealing, nitridation influenced the growth of GaN. When the Al layer was annealed at 1050°C without NH₃, GaN grew in the form of a film. However, it had numerous pits on the surface (Fig. 4(b)). This implies that the formation of pits is related to insufficient nitridation of the Al layer. The formation of these pits can be prevented by supplying NH₃ in the annealing step, as shown in GaN in Fig. 2(b). Meanwhile, when the high-temperature GaN was directly grown without a GaN nucleation layer on the high-temperature nitrided Al layer, the resultant GaN grew in the form of a film but had a relatively rough surface due to the formation of round hillocks (Fig. 4(c)). This may be because the Al layer is too thin. For this reason, prior to the growth of high-temperature GaN, a GaN nucleation layer was additionally grown on the Al layer. As a result, a high-quality Ga-polar GaN film, similar to a conventional Ga-polar GaN film, could be grown on the E-beam evaporated Al layer, as shown in Fig. 2(b).

Fig. 4. SEM images of GaN grown on the 5-nm thick Al layers treated under different conditions: (a) no high-temperature nitridation, (b) annealing at 1050°C without NH₃, and (c) annealing at 1050°C with NH₃. In cases (a) and (b), a GaN nucleation layer grew on the Al layer after treatment but not in the case of (c).

Download Full Size | PPT Slide | PDF

Thus far, it has been shown that GaN film can be grown on E-beam evaporated Al layers through high-temperature nitridation. It can be inferred through the concept of solid-phase epitaxy that the E-beam evaporated Al layer can be recrystallized by annealing. However, it is somewhat difficult to accurately describe the process by which the Al layer recrystallizes. When the Al layer is exposed to air, amorphous aluminum oxide forms on the surface of the Al layer [32,33]. This amorphous aluminum oxide can be recrystallized into α-phase Al₂O₃ by solid-phase epitaxy [34,35]. In addition, since NH₃ was supplied during the annealing process, the nitrogen atoms may affect the recrystallization. Therefore, further studies are needed to clarify the recrystallization process of the Al layer.

To evaluate the structural and optical properties of Ga- and N-polar GaN grown by this method, comparative analyses were performed with conventional Ga-polar GaN grown on a sapphire substrate. Figure 5(a) shows the Raman spectra of the GaN samples. The stress of the GaN films can be investigated by comparing the E₂(high) mode with a value of stress-free GaN [36]. For this comparison, the E₂(high) mode of bulk GaN was measured and used as the value of stress-free GaN. The measured E₂(high) mode was 567.2 cm⁻¹, which is well-matched with the reported value of stress-free GaN [37,38]. The corresponding value for the Ga-polar GaN/5-nm Al layer was 569.6 cm⁻¹, which is higher than that for the conventional Ga-polar GaN. This indicates that the Ga-polar GaN/5-nm Al layer exhibits higher compressive stress than conventional Ga-polar GaN. In the case of N-polar GaN, the E₂(high) mode frequency was located at 567.2 cm⁻¹, indicating that the stress in N-polar GaN is almost relaxed. Figure 5(b) shows the room-temperature PL spectra. The PL peak energies of the Ga-polar GaN/5-nm Al layer and N-polar GaN were 3.41 eV and 3.39 eV, respectively. These values are slightly lower than the 3.42 eV of the conventional Ga-polar GaN. It should be noted that PL emission in the Ga-polar GaN/5-nm Al layer should be spectrally blue-shifted when considering only the strain effect but became actually red-shifted. Generally, compressive (tensile) strain induces the spectral blue-shift (red-shift) of band-edge emission in the PL spectrum due to band structure modulation. However, a large defect density can lead to spectral red-shift and exhibits a long tail on the lower energy side in the PL spectrum because of bandgap fluctuations in connection with defect states [39]. Therefore, the shift of the PL peak energy should take both into account for a combined effect of the residual strain and native defects. In Fig. 5(b), a relatively long tail on the lower energy side in Ga-polar GaN/5-nm Al layer compared to the conventional Ga-polar GaN demonstrates the presence of defects. The presence of defects could possibly compensate for the strain-induced spectral blue-shift and further induces spectral red-shift in PL spectra.

Fig. 5. Comparative analysis of a Ga-polar GaN grown on the 5-nm thick Al layer, N-polar GaN, and conventional Ga-polar GaN: (a) Raman spectra and (b) Photoluminescence spectra.

Download Full Size | PPT Slide | PDF

Figure 6(a) shows the XRD phi scan of Ga-polar GaN grown on a 5-nm thick Al layer. The phi scan curve of the GaN (10$\bar{1}$2) plane represents six peaks separated by 60° intervals, and it indicates the six-fold symmetry of the GaN. In addition, the peaks of the sapphire (10$\bar{1}$4) plane and the GaN (10$\bar{1}$2) plane were separated by 30°. This shows that the GaN film grown on a 5-nm thick Al layer was rotated by 30° with respect to the sapphire substrate, similar to conventional GaN grown on a sapphire substrate. Figures 6(b) and 6(c) show the normalized X-ray rocking curves (XRC) of the (0002) and (10$\bar{1}$2) planes, respectively. In the XRCs of the (0002) reflection, the FWHM of the Ga-polar GaN/5-nm Al layer was 684 arcsec, which is larger than the 453 arcsec of conventional Ga-polar GaN. In contrast, in the (10$\bar{1}$2) reflection, the FWHM of the Ga-polar GaN/5-nm Al layer was 964 arcsec, which is slightly smaller than the 1036 arcsec of conventional Ga-polar GaN. Because the broadening of the symmetric (0002) XRC is only sensitive to the screw and mixed threading dislocations, it can be seen that the Ga-polar GaN/5-nm Al layer has a higher screw and mixed threading dislocations compared to conventional Ga-polar GaN [40]. In the case of N-polar GaN, the FWHM value was 424 arcsec for the (0002) reflection and 709 arcsec for the (10$\bar{1}$2) reflection, which were the lowest values for both reflections compared to the Ga-polar GaN samples.

Fig. 6. X-ray diffraction spectra of Ga-polar GaN grown on a 5-nm thick Al layer, N-polar GaN, and conventional Ga-polar GaN: (a) Phi scan of the Ga-polar GaN/5-nm Al layer for the GaN (10$\bar{1}$2) and sapphire (10$\bar{1}$4) planes and rocking curves of GaN films for the (b) (0002) and (c) (10$\bar{1}$2) reflections. The thicknesses of both Ga-polar GaN/5-nm Al layer and conventional Ga-polar GaN were 1.2 µm and the thickness of N-polar GaN varied at 1.0–1.4 µm due to its hexagonal hillocks.

Download Full Size | PPT Slide | PDF

In addition to controlling the polarity of unipolar GaN films, two types of lateral polarity structures were fabricated using patterned Al layers to demonstrate that this method can selectively control the polarity of the selected area. Figures 7(a) and 7(c) show SEM images of lateral polarity structures grown on circular and striped patterned Al layers, respectively. The GaN grown on patterned Al layers had a smooth surface in both samples. However, the GaN grown on the sapphire surface had a rough surface covered by hexagonal hillocks. The surface morphologies of each area were similar to those of Ga- and N-polar GaN described in Figs. 2(b) and 2(a), respectively. The polarity of GaN grown in each area was investigated through polarity-dependent etching by KOH solution. Figures 7(b) and 7(d) show the surface of the lateral polarity structures after KOH etching. GaN grown on the patterned Al layers remained in both structures. This shows that Ga-polar GaN grew on the patterned Al layer. In contrast, the GaN grown on the sapphire surface was completely etched away by KOH solution. Thus, N-polar GaN was grown in areas where the Al layer was not deposited. These results indicate that the polarity of GaN can be controlled according to the pattern of the Al layer. Since this method can easily control the polarity of the selected area without complex processes, it is expected to be utilized in various applications requiring polarity control.

Fig. 7. SEM images of GaN lateral polarity structures grown on (a) the circular patterned Al layer with a diameter of 20 µm and a pitch of 60 µm and (c) the striped patterned Al layer with a width of 30 µm and a pitch of 60 µm. The KOH etched lateral polarity structures grown on (b) circular and (d) striped patterned Al layers.

Download Full Size | PPT Slide | PDF

4. Conclusions

In summary, we introduced a method for controlling the polarity of GaN using an E-beam evaporated Al layer on a sapphire substrate. For this purpose, a high-temperature nitridation process was designed to enable the amorphous Al layer to act as a nucleation layer for Ga-polar GaN growth. Using this method, we successfully grew single-crystal Ga-polar GaN on the E-beam evaporated Al layer. When the thickness of the Al layer was less than 5 nm, GaN grew in the form of a film, but as the thickness of the Al layer increased, the resulting GaN was in the form of islands. There was no significant difference in the optical and structural properties of Ga-polar GaN grown on a 5-nm thick Al layer and conventional Ga-polar GaN. Furthermore, on the surface of sapphire where the Al layer was not deposited, N-polar GaN could be grown via the same growth process. This implies that the polarity can be controlled by depositing an Al layer. In addition to controlling the polarity of unipolar GaN films, two types of lateral polarity structures were fabricated using patterned Al layers on sapphire substrates. The patterned Al layers prevented surface nitridation of sapphire and acted as a nucleation layer for Ga-polar GaN growth. As a result, it was demonstrated that Ga-polar and N-polar GaN could be selectively grown on the patterned Al layer and the sapphire surface, respectively. These results indicate that the polarity of GaN can be selectively controlled according to the pattern of the Al layer. Since the method using an E-beam evaporated Al layer can be used to control the polarity of GaN without complex processes, it is expected to be utilized in various applications requiring polarity control.

Funding

Gwangju Institute of Science and Technology (GIST); Samsung Electronics.

Acknowledgments

This research was supported in part by the GIST Research Institute (GRI) and Samsung Electronics in 2021.

Disclosures

The authors declare no conflicts of interest.

References

1. S. Keller, H. Li, M. Laurent, Y. Hu, N. Pfaff, J. Lu, D. F. Brown, N. A. Fichtenbaum, J. S. Speck, S. P. Denbaars, and U. K. Mishra, “Recent progress in metal-organic chemical vapor deposition of (000) N-polar group-III nitrides,” Semicond. Sci. Technol. 29(11), 113001 (2014). [CrossRef]

2. M. Stutzmann, O. Ambacher, M. Eickhoff, U. Karrer, A. L. Pimenta, R. Neuberger, J. Schalwig, R. Dimitrov, P. J. Schuck, and R. D. Grober, “Playing with polarity,” Phys. Status Solidi B 228(2), 505–512 (2001). [CrossRef]

3. W. Guo, H. Xu, L. Chen, H. Yu, J. Jiang, M. Sheikhi, L. Li, Y. Dai, M. Cui, H. Sun, and J. Ye, “Polarity control and fabrication of lateral polarity structures of III-nitride thin films and devices: Progress and prospects,” J. Phys. D: Appl. Phys. 53(48), 483002 (2020). [CrossRef]

4. A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003). [CrossRef]

5. D. Alden, T. Troha, R. Kirste, S. Mita, Q. Guo, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Quasi-phase-matched second harmonic generation of UV light using AlN waveguides,” Appl. Phys. Lett. 114(10), 103504 (2019). [CrossRef]

6. D. Alden, W. Guo, R. Kirste, F. Kaess, I. Bryan, T. Troha, A. Bagal, P. Reddy, L. H. Hernandez-Balderrama, A. Franke, S. Mita, C. H. Chang, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications,” Appl. Phys. Lett. 108(26), 261106 (2016). [CrossRef]

7. W. Guo, H. Sun, B. Torre, J. Li, M. Sheikhi, J. Jiang, H. Li, S. Guo, K. H. Li, R. Lin, A. Giugni, E. Di Fabrizio, X. Li, and J. Ye, “Lateral-polarity structure of AlGaN quantum wells: a promising approach to enhancing the ultraviolet luminescence,” Adv. Funct. Mater. 28(32), 1802395 (2018). [CrossRef]

8. W. Guo, S. Mitra, J. Jiang, H. Xu, M. Sheikhi, H. Sun, K. Tian, Z. Zhang, H. Jiang, I. S. Roqan, X. Li, and J. Ye, “Three-dimensional band diagram in lateral polarity junction III-nitride heterostructures,” Optica 6(8), 1058 (2019). [CrossRef]

9. H. Xu, J. Jiang, Y. Dai, M. Cui, K. Li, X. Ge, J. Hoo, L. Yan, S. Guo, J. Ning, H. Sun, B. Sarkar, W. Guo, and J. Ye, “Polarity control and nanoscale optical characterization of AlGaN-based multiple-quantum-wells for ultraviolet C emitters,” ACS Appl. Nano Mater. 3(6), 5335–5342 (2020). [CrossRef]

10. A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006). [CrossRef]

11. M. Sheikhi, J. Li, F. Meng, H. Li, S. Guo, L. Liang, H. Cao, P. Gao, J. Ye, and W. Guo, “Polarity control of GaN and realization of GaN Schottky barrier diode based on lateral polarity structure,” IEEE Trans. Electron Devices 64(11), 4424–4429 (2017). [CrossRef]

12. L. E. Bain, R. Kirste, C. A. Johnson, H. T. Ghashghaei, R. Collazo, and A. Ivanisevic, “Neurotypic cell attachment and growth on III-nitride lateral polarity structures,” Mater. Sci. Eng., C 58, 1194–1198 (2016). [CrossRef]

13. Y. L. Wang, B. H. Chu, C. Y. Chang, K. H. Chen, Y. Zhang, Q. Sun, J. Han, S. J. Pearton, and F. Ren, “Hydrogen sensing of N-polar and Ga-polar GaN Schottky diodes,” Sens. Actuators, B 142(1), 175–178 (2009). [CrossRef]

14. R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007). [CrossRef]

15. R. Kirste, S. Mita, L. Hussey, M. P. Hoffmann, W. Guo, I. Bryan, Z. Bryan, J. Tweedie, J. Xie, M. Gerhold, R. Collazo, and Z. Sitar, “Polarity control and growth of lateral polarity structures in AlN,” Appl. Phys. Lett. 102(18), 181913 (2013). [CrossRef]

16. S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009). [CrossRef]

17. S. Fuke, H. Teshigawara, K. Kuwahara, Y. Takano, T. Ito, M. Yanagihara, and K. Ohtsuka, “Influences of initial nitridation and buffer layer deposition on the morphology of a (0001) GaN layer grown on sapphire substrates,” J. Appl. Phys. 83(2), 764–767 (1998). [CrossRef]

18. F. Liu, R. Collazo, S. Mita, Z. Sitar, G. Duscher, and S. J. Pennycook, “The mechanism for polarity inversion of GaN via a thin AlN layer: Direct experimental evidence,” Appl. Phys. Lett. 91(20), 203115 (2007). [CrossRef]

19. J. K. Hite, N. D. Bassim, M. E. Twigg, M. A. Mastro, F. J. Kub, and C. R. Eddy Jr, “GaN vertical and lateral polarity heterostructures on GaN substrates,” J. Cryst. Growth 332(1), 43–47 (2011). [CrossRef]

20. J. K. Hite, N. Y. Garces, R. Goswami, M. A. Mastro, F. J. Kub, and C. R. Eddy, “Selective switching of GaN polarity on Ga-polar GaN using atomic layer deposited Al₂O₃,” Appl. Phys. Express 7(2), 025502 (2014). [CrossRef]

21. S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004). [CrossRef]

22. K. Kuze, N. Osumi, Y. Fujita, Y. Inoue, and T. Nakano, “Analysis of interface formation mechanism in GaN double-polarity selective-area growth by metalorganic vapor phase epitaxy,” Jpn. J. Appl. Phys. 55(5S), 05FA05 (2016). [CrossRef]

23. H. Yagi, N. Osumi, Y. Inoue, and T. Nakano, “Double-Polarity selective-area growth of GaN by metal-organic vapor-phase epitaxy using narrow-pitch patterns,” Phys. Status Solidi B 255(5), 1700475 (2018). [CrossRef]

24. A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003). [CrossRef]

25. S. Mohn, N. Stolyarchuk, T. Markurt, R. Kirste, M. P. Hoffmann, R. Collazo, A. Courville, R. Di Felice, Z. Sitar, P. Vennéguès, and M. Albrecht, “Polarity control in Group-III nitrides beyond pragmatism,” Phys. Rev. Appl. 5(5), 054004 (2016). [CrossRef]

26. W. Wang, H. Wang, W. Yang, Y. Zhu, and G. Li, “A new approach to epitaxially grow high-quality GaN films on Si substrates: The combination of MBE and PLD,” Sci. Rep. 6(1), 24448 (2016). [CrossRef]

27. J. L. Rouviere, J. L. Weyher, M. Seelmann-Eggebert, and S. Porowski, “Polarity determination for GaN films grown on (0001) sapphire and high-pressure-grown GaN single crystals,” Appl. Phys. Lett. 73(5), 668–670 (1998). [CrossRef]

28. D. Li, M. Sumiya, S. Fuke, D. Yang, D. Que, Y. Suzuki, and Y. Fukuda, “Selective etching of GaN polar surface in potassium hydroxide solution studied by x-ray photoelectron spectroscopy,” J. Appl. Phys. 90(8), 4219–4223 (2001). [CrossRef]

29. M. Sumiya, K. Yoshimura, T. Ito, K. Ohtsuka, S. Fuke, K. Mizuno, M. Yoshimoto, H. Koinuma, A. Ohtomo, and M. Kawasaki, “Growth mode and surface morphology of a GaN film deposited along the N-face polar direction on c-plane sapphire substrate,” J. Appl. Phys. 88(2), 1158–1165 (2000). [CrossRef]

30. G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988). [CrossRef]

31. R. Duffy, M. J. H. Van Dal, B. J. Pawlak, M. Kaiser, R. G. R. Weemaes, B. Degroote, E. Kunnen, and E. Altamirano, “Solid phase epitaxy versus random nucleation and growth in sub-20 nm wide fin field-effect transistors,” Appl. Phys. Lett. 90(24), 241912 (2007). [CrossRef]

32. N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949). [CrossRef]

33. L. Nguyen, T. Hashimoto, D. N. Zakharov, E. A. Stach, A. P. Rooney, B. Berkels, G. E. Thompson, S. J. Haigh, and T. L. Burnett, “Atomic-Scale Insights into the Oxidation of Aluminum,” ACS Appl. Mater. Interfaces 10(3), 2230–2235 (2018). [CrossRef]

34. J. Jang, D. Yang, D. Moon, D. Choi, H. J. Lim, S. gyu Kang, D. Bae, H. N. Han, Y. Park, and E. Yoon, “Solid-phase epitaxy of a cavity-shaped amorphous alumina nanomembrane structure on a sapphire substrate,” J. Cryst. Growth 498, 130–136 (2018). [CrossRef]

35. S. Lee, J. Kim, J. Oh, J. Ryu, K. Hwang, J. Hwang, S. Kang, J. H. Choi, Y. C. Sim, Y. H. Cho, T. H. Chung, T. Jeong, Y. Park, and E. Yoon, “A discrete core-shell-like micro-light-emitting diode array grown on sapphire nano-membranes,” Sci. Rep. 10(1), 7506 (2020). [CrossRef]

36. M. Kuball, “Raman spectroscopy of GaN, AlGaN and AlN for process and growth monitoring/control,” Surf. Interface Anal. 31(10), 987–999 (2001). [CrossRef]

37. G. Nootz, A. Schulte, L. Chernyak, A. Osinsky, J. Jasinski, M. Benamara, and Z. Liliental-Weber, “Correlations between spatially resolved Raman shifts and dislocation density in GaN films,” Appl. Phys. Lett. 80(8), 1355–1357 (2002). [CrossRef]

38. M. Park, J. J. Cuomo, B. J. Rodriguez, W.-C. Yang, R. J. Nemanich, and O. Ambacher, “Micro-Raman study of electronic properties of inversion domains in GaN-based lateral polarity heterostructures,” J. Appl. Phys. 93(12), 9542–9547 (2003). [CrossRef]

39. S. F. Chichibu, A. Setoguchi, A. Uedono, K. Yoshimura, and M. Sumiya, “Impact of growth polar direction on the optical properties of GaN grown by metalorganic vapor phase epitaxy,” Appl. Phys. Lett. 78(1), 28–30 (2001). [CrossRef]

40. B. Heying, X. H. Wu, S. Keller, Y. Li, D. Kapolnek, B. P. Keller, S. P. Denbaars, and J. S. Speck, “Role of threading dislocation structure on the x-ray diffraction peak widths in epitaxial GaN films,” Appl. Phys. Lett. 68(5), 643–645 (1996). [CrossRef]

Previous Article Next Article

References

View by:
Article Order
Year
Author
Publication

S. Keller, H. Li, M. Laurent, Y. Hu, N. Pfaff, J. Lu, D. F. Brown, N. A. Fichtenbaum, J. S. Speck, S. P. Denbaars, and U. K. Mishra, “Recent progress in metal-organic chemical vapor deposition of (000) N-polar group-III nitrides,” Semicond. Sci. Technol. 29(11), 113001 (2014).
[Crossref]
M. Stutzmann, O. Ambacher, M. Eickhoff, U. Karrer, A. L. Pimenta, R. Neuberger, J. Schalwig, R. Dimitrov, P. J. Schuck, and R. D. Grober, “Playing with polarity,” Phys. Status Solidi B 228(2), 505–512 (2001).
[Crossref]
W. Guo, H. Xu, L. Chen, H. Yu, J. Jiang, M. Sheikhi, L. Li, Y. Dai, M. Cui, H. Sun, and J. Ye, “Polarity control and fabrication of lateral polarity structures of III-nitride thin films and devices: Progress and prospects,” J. Phys. D: Appl. Phys. 53(48), 483002 (2020).
[Crossref]
A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]
D. Alden, T. Troha, R. Kirste, S. Mita, Q. Guo, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Quasi-phase-matched second harmonic generation of UV light using AlN waveguides,” Appl. Phys. Lett. 114(10), 103504 (2019).
[Crossref]
D. Alden, W. Guo, R. Kirste, F. Kaess, I. Bryan, T. Troha, A. Bagal, P. Reddy, L. H. Hernandez-Balderrama, A. Franke, S. Mita, C. H. Chang, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications,” Appl. Phys. Lett. 108(26), 261106 (2016).
[Crossref]
W. Guo, H. Sun, B. Torre, J. Li, M. Sheikhi, J. Jiang, H. Li, S. Guo, K. H. Li, R. Lin, A. Giugni, E. Di Fabrizio, X. Li, and J. Ye, “Lateral-polarity structure of AlGaN quantum wells: a promising approach to enhancing the ultraviolet luminescence,” Adv. Funct. Mater. 28(32), 1802395 (2018).
[Crossref]
W. Guo, S. Mitra, J. Jiang, H. Xu, M. Sheikhi, H. Sun, K. Tian, Z. Zhang, H. Jiang, I. S. Roqan, X. Li, and J. Ye, “Three-dimensional band diagram in lateral polarity junction III-nitride heterostructures,” Optica 6(8), 1058 (2019).
[Crossref]
H. Xu, J. Jiang, Y. Dai, M. Cui, K. Li, X. Ge, J. Hoo, L. Yan, S. Guo, J. Ning, H. Sun, B. Sarkar, W. Guo, and J. Ye, “Polarity control and nanoscale optical characterization of AlGaN-based multiple-quantum-wells for ultraviolet C emitters,” ACS Appl. Nano Mater. 3(6), 5335–5342 (2020).
[Crossref]
A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]
M. Sheikhi, J. Li, F. Meng, H. Li, S. Guo, L. Liang, H. Cao, P. Gao, J. Ye, and W. Guo, “Polarity control of GaN and realization of GaN Schottky barrier diode based on lateral polarity structure,” IEEE Trans. Electron Devices 64(11), 4424–4429 (2017).
[Crossref]
L. E. Bain, R. Kirste, C. A. Johnson, H. T. Ghashghaei, R. Collazo, and A. Ivanisevic, “Neurotypic cell attachment and growth on III-nitride lateral polarity structures,” Mater. Sci. Eng., C 58, 1194–1198 (2016).
[Crossref]
Y. L. Wang, B. H. Chu, C. Y. Chang, K. H. Chen, Y. Zhang, Q. Sun, J. Han, S. J. Pearton, and F. Ren, “Hydrogen sensing of N-polar and Ga-polar GaN Schottky diodes,” Sens. Actuators, B 142(1), 175–178 (2009).
[Crossref]
R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]
R. Kirste, S. Mita, L. Hussey, M. P. Hoffmann, W. Guo, I. Bryan, Z. Bryan, J. Tweedie, J. Xie, M. Gerhold, R. Collazo, and Z. Sitar, “Polarity control and growth of lateral polarity structures in AlN,” Appl. Phys. Lett. 102(18), 181913 (2013).
[Crossref]
S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]
S. Fuke, H. Teshigawara, K. Kuwahara, Y. Takano, T. Ito, M. Yanagihara, and K. Ohtsuka, “Influences of initial nitridation and buffer layer deposition on the morphology of a (0001) GaN layer grown on sapphire substrates,” J. Appl. Phys. 83(2), 764–767 (1998).
[Crossref]
F. Liu, R. Collazo, S. Mita, Z. Sitar, G. Duscher, and S. J. Pennycook, “The mechanism for polarity inversion of GaN via a thin AlN layer: Direct experimental evidence,” Appl. Phys. Lett. 91(20), 203115 (2007).
[Crossref]
J. K. Hite, N. D. Bassim, M. E. Twigg, M. A. Mastro, F. J. Kub, and C. R. Eddy Jr, “GaN vertical and lateral polarity heterostructures on GaN substrates,” J. Cryst. Growth 332(1), 43–47 (2011).
[Crossref]
J. K. Hite, N. Y. Garces, R. Goswami, M. A. Mastro, F. J. Kub, and C. R. Eddy, “Selective switching of GaN polarity on Ga-polar GaN using atomic layer deposited Al2O3,” Appl. Phys. Express 7(2), 025502 (2014).
[Crossref]
S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]
K. Kuze, N. Osumi, Y. Fujita, Y. Inoue, and T. Nakano, “Analysis of interface formation mechanism in GaN double-polarity selective-area growth by metalorganic vapor phase epitaxy,” Jpn. J. Appl. Phys. 55(5S), 05FA05 (2016).
[Crossref]
H. Yagi, N. Osumi, Y. Inoue, and T. Nakano, “Double-Polarity selective-area growth of GaN by metal-organic vapor-phase epitaxy using narrow-pitch patterns,” Phys. Status Solidi B 255(5), 1700475 (2018).
[Crossref]
A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003).
[Crossref]
S. Mohn, N. Stolyarchuk, T. Markurt, R. Kirste, M. P. Hoffmann, R. Collazo, A. Courville, R. Di Felice, Z. Sitar, P. Vennéguès, and M. Albrecht, “Polarity control in Group-III nitrides beyond pragmatism,” Phys. Rev. Appl. 5(5), 054004 (2016).
[Crossref]
W. Wang, H. Wang, W. Yang, Y. Zhu, and G. Li, “A new approach to epitaxially grow high-quality GaN films on Si substrates: The combination of MBE and PLD,” Sci. Rep. 6(1), 24448 (2016).
[Crossref]
J. L. Rouviere, J. L. Weyher, M. Seelmann-Eggebert, and S. Porowski, “Polarity determination for GaN films grown on (0001) sapphire and high-pressure-grown GaN single crystals,” Appl. Phys. Lett. 73(5), 668–670 (1998).
[Crossref]
D. Li, M. Sumiya, S. Fuke, D. Yang, D. Que, Y. Suzuki, and Y. Fukuda, “Selective etching of GaN polar surface in potassium hydroxide solution studied by x-ray photoelectron spectroscopy,” J. Appl. Phys. 90(8), 4219–4223 (2001).
[Crossref]
M. Sumiya, K. Yoshimura, T. Ito, K. Ohtsuka, S. Fuke, K. Mizuno, M. Yoshimoto, H. Koinuma, A. Ohtomo, and M. Kawasaki, “Growth mode and surface morphology of a GaN film deposited along the N-face polar direction on c-plane sapphire substrate,” J. Appl. Phys. 88(2), 1158–1165 (2000).
[Crossref]
G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988).
[Crossref]
R. Duffy, M. J. H. Van Dal, B. J. Pawlak, M. Kaiser, R. G. R. Weemaes, B. Degroote, E. Kunnen, and E. Altamirano, “Solid phase epitaxy versus random nucleation and growth in sub-20 nm wide fin field-effect transistors,” Appl. Phys. Lett. 90(24), 241912 (2007).
[Crossref]
N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949).
[Crossref]
L. Nguyen, T. Hashimoto, D. N. Zakharov, E. A. Stach, A. P. Rooney, B. Berkels, G. E. Thompson, S. J. Haigh, and T. L. Burnett, “Atomic-Scale Insights into the Oxidation of Aluminum,” ACS Appl. Mater. Interfaces 10(3), 2230–2235 (2018).
[Crossref]
J. Jang, D. Yang, D. Moon, D. Choi, H. J. Lim, S. gyu Kang, D. Bae, H. N. Han, Y. Park, and E. Yoon, “Solid-phase epitaxy of a cavity-shaped amorphous alumina nanomembrane structure on a sapphire substrate,” J. Cryst. Growth 498, 130–136 (2018).
[Crossref]
S. Lee, J. Kim, J. Oh, J. Ryu, K. Hwang, J. Hwang, S. Kang, J. H. Choi, Y. C. Sim, Y. H. Cho, T. H. Chung, T. Jeong, Y. Park, and E. Yoon, “A discrete core-shell-like micro-light-emitting diode array grown on sapphire nano-membranes,” Sci. Rep. 10(1), 7506 (2020).
[Crossref]
M. Kuball, “Raman spectroscopy of GaN, AlGaN and AlN for process and growth monitoring/control,” Surf. Interface Anal. 31(10), 987–999 (2001).
[Crossref]
G. Nootz, A. Schulte, L. Chernyak, A. Osinsky, J. Jasinski, M. Benamara, and Z. Liliental-Weber, “Correlations between spatially resolved Raman shifts and dislocation density in GaN films,” Appl. Phys. Lett. 80(8), 1355–1357 (2002).
[Crossref]
M. Park, J. J. Cuomo, B. J. Rodriguez, W.-C. Yang, R. J. Nemanich, and O. Ambacher, “Micro-Raman study of electronic properties of inversion domains in GaN-based lateral polarity heterostructures,” J. Appl. Phys. 93(12), 9542–9547 (2003).
[Crossref]
S. F. Chichibu, A. Setoguchi, A. Uedono, K. Yoshimura, and M. Sumiya, “Impact of growth polar direction on the optical properties of GaN grown by metalorganic vapor phase epitaxy,” Appl. Phys. Lett. 78(1), 28–30 (2001).
[Crossref]
B. Heying, X. H. Wu, S. Keller, Y. Li, D. Kapolnek, B. P. Keller, S. P. Denbaars, and J. S. Speck, “Role of threading dislocation structure on the x-ray diffraction peak widths in epitaxial GaN films,” Appl. Phys. Lett. 68(5), 643–645 (1996).
[Crossref]

2020 (3)

W. Guo, H. Xu, L. Chen, H. Yu, J. Jiang, M. Sheikhi, L. Li, Y. Dai, M. Cui, H. Sun, and J. Ye, “Polarity control and fabrication of lateral polarity structures of III-nitride thin films and devices: Progress and prospects,” J. Phys. D: Appl. Phys. 53(48), 483002 (2020).
[Crossref]

H. Xu, J. Jiang, Y. Dai, M. Cui, K. Li, X. Ge, J. Hoo, L. Yan, S. Guo, J. Ning, H. Sun, B. Sarkar, W. Guo, and J. Ye, “Polarity control and nanoscale optical characterization of AlGaN-based multiple-quantum-wells for ultraviolet C emitters,” ACS Appl. Nano Mater. 3(6), 5335–5342 (2020).
[Crossref]

S. Lee, J. Kim, J. Oh, J. Ryu, K. Hwang, J. Hwang, S. Kang, J. H. Choi, Y. C. Sim, Y. H. Cho, T. H. Chung, T. Jeong, Y. Park, and E. Yoon, “A discrete core-shell-like micro-light-emitting diode array grown on sapphire nano-membranes,” Sci. Rep. 10(1), 7506 (2020).
[Crossref]

2019 (2)

D. Alden, T. Troha, R. Kirste, S. Mita, Q. Guo, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Quasi-phase-matched second harmonic generation of UV light using AlN waveguides,” Appl. Phys. Lett. 114(10), 103504 (2019).
[Crossref]

W. Guo, S. Mitra, J. Jiang, H. Xu, M. Sheikhi, H. Sun, K. Tian, Z. Zhang, H. Jiang, I. S. Roqan, X. Li, and J. Ye, “Three-dimensional band diagram in lateral polarity junction III-nitride heterostructures,” Optica 6(8), 1058 (2019).
[Crossref]

2018 (4)

W. Guo, H. Sun, B. Torre, J. Li, M. Sheikhi, J. Jiang, H. Li, S. Guo, K. H. Li, R. Lin, A. Giugni, E. Di Fabrizio, X. Li, and J. Ye, “Lateral-polarity structure of AlGaN quantum wells: a promising approach to enhancing the ultraviolet luminescence,” Adv. Funct. Mater. 28(32), 1802395 (2018).
[Crossref]

L. Nguyen, T. Hashimoto, D. N. Zakharov, E. A. Stach, A. P. Rooney, B. Berkels, G. E. Thompson, S. J. Haigh, and T. L. Burnett, “Atomic-Scale Insights into the Oxidation of Aluminum,” ACS Appl. Mater. Interfaces 10(3), 2230–2235 (2018).
[Crossref]

J. Jang, D. Yang, D. Moon, D. Choi, H. J. Lim, S. gyu Kang, D. Bae, H. N. Han, Y. Park, and E. Yoon, “Solid-phase epitaxy of a cavity-shaped amorphous alumina nanomembrane structure on a sapphire substrate,” J. Cryst. Growth 498, 130–136 (2018).
[Crossref]

H. Yagi, N. Osumi, Y. Inoue, and T. Nakano, “Double-Polarity selective-area growth of GaN by metal-organic vapor-phase epitaxy using narrow-pitch patterns,” Phys. Status Solidi B 255(5), 1700475 (2018).
[Crossref]

2017 (1)

M. Sheikhi, J. Li, F. Meng, H. Li, S. Guo, L. Liang, H. Cao, P. Gao, J. Ye, and W. Guo, “Polarity control of GaN and realization of GaN Schottky barrier diode based on lateral polarity structure,” IEEE Trans. Electron Devices 64(11), 4424–4429 (2017).
[Crossref]

2016 (5)

L. E. Bain, R. Kirste, C. A. Johnson, H. T. Ghashghaei, R. Collazo, and A. Ivanisevic, “Neurotypic cell attachment and growth on III-nitride lateral polarity structures,” Mater. Sci. Eng., C 58, 1194–1198 (2016).
[Crossref]

D. Alden, W. Guo, R. Kirste, F. Kaess, I. Bryan, T. Troha, A. Bagal, P. Reddy, L. H. Hernandez-Balderrama, A. Franke, S. Mita, C. H. Chang, A. Hoffmann, M. Zgonik, R. Collazo, and Z. Sitar, “Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications,” Appl. Phys. Lett. 108(26), 261106 (2016).
[Crossref]

S. Mohn, N. Stolyarchuk, T. Markurt, R. Kirste, M. P. Hoffmann, R. Collazo, A. Courville, R. Di Felice, Z. Sitar, P. Vennéguès, and M. Albrecht, “Polarity control in Group-III nitrides beyond pragmatism,” Phys. Rev. Appl. 5(5), 054004 (2016).
[Crossref]

W. Wang, H. Wang, W. Yang, Y. Zhu, and G. Li, “A new approach to epitaxially grow high-quality GaN films on Si substrates: The combination of MBE and PLD,” Sci. Rep. 6(1), 24448 (2016).
[Crossref]

K. Kuze, N. Osumi, Y. Fujita, Y. Inoue, and T. Nakano, “Analysis of interface formation mechanism in GaN double-polarity selective-area growth by metalorganic vapor phase epitaxy,” Jpn. J. Appl. Phys. 55(5S), 05FA05 (2016).
[Crossref]

2014 (2)

J. K. Hite, N. Y. Garces, R. Goswami, M. A. Mastro, F. J. Kub, and C. R. Eddy, “Selective switching of GaN polarity on Ga-polar GaN using atomic layer deposited Al2O3,” Appl. Phys. Express 7(2), 025502 (2014).
[Crossref]

S. Keller, H. Li, M. Laurent, Y. Hu, N. Pfaff, J. Lu, D. F. Brown, N. A. Fichtenbaum, J. S. Speck, S. P. Denbaars, and U. K. Mishra, “Recent progress in metal-organic chemical vapor deposition of (000) N-polar group-III nitrides,” Semicond. Sci. Technol. 29(11), 113001 (2014).
[Crossref]

2013 (1)

R. Kirste, S. Mita, L. Hussey, M. P. Hoffmann, W. Guo, I. Bryan, Z. Bryan, J. Tweedie, J. Xie, M. Gerhold, R. Collazo, and Z. Sitar, “Polarity control and growth of lateral polarity structures in AlN,” Appl. Phys. Lett. 102(18), 181913 (2013).
[Crossref]

2011 (1)

J. K. Hite, N. D. Bassim, M. E. Twigg, M. A. Mastro, F. J. Kub, and C. R. Eddy Jr, “GaN vertical and lateral polarity heterostructures on GaN substrates,” J. Cryst. Growth 332(1), 43–47 (2011).
[Crossref]

2009 (2)

S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]

Y. L. Wang, B. H. Chu, C. Y. Chang, K. H. Chen, Y. Zhang, Q. Sun, J. Han, S. J. Pearton, and F. Ren, “Hydrogen sensing of N-polar and Ga-polar GaN Schottky diodes,” Sens. Actuators, B 142(1), 175–178 (2009).
[Crossref]

2007 (3)

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

F. Liu, R. Collazo, S. Mita, Z. Sitar, G. Duscher, and S. J. Pennycook, “The mechanism for polarity inversion of GaN via a thin AlN layer: Direct experimental evidence,” Appl. Phys. Lett. 91(20), 203115 (2007).
[Crossref]

R. Duffy, M. J. H. Van Dal, B. J. Pawlak, M. Kaiser, R. G. R. Weemaes, B. Degroote, E. Kunnen, and E. Altamirano, “Solid phase epitaxy versus random nucleation and growth in sub-20 nm wide fin field-effect transistors,” Appl. Phys. Lett. 90(24), 241912 (2007).
[Crossref]

2006 (1)

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

2004 (1)

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

2003 (3)

A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003).
[Crossref]

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

M. Park, J. J. Cuomo, B. J. Rodriguez, W.-C. Yang, R. J. Nemanich, and O. Ambacher, “Micro-Raman study of electronic properties of inversion domains in GaN-based lateral polarity heterostructures,” J. Appl. Phys. 93(12), 9542–9547 (2003).
[Crossref]

2002 (1)

G. Nootz, A. Schulte, L. Chernyak, A. Osinsky, J. Jasinski, M. Benamara, and Z. Liliental-Weber, “Correlations between spatially resolved Raman shifts and dislocation density in GaN films,” Appl. Phys. Lett. 80(8), 1355–1357 (2002).
[Crossref]

2001 (4)

S. F. Chichibu, A. Setoguchi, A. Uedono, K. Yoshimura, and M. Sumiya, “Impact of growth polar direction on the optical properties of GaN grown by metalorganic vapor phase epitaxy,” Appl. Phys. Lett. 78(1), 28–30 (2001).
[Crossref]

M. Stutzmann, O. Ambacher, M. Eickhoff, U. Karrer, A. L. Pimenta, R. Neuberger, J. Schalwig, R. Dimitrov, P. J. Schuck, and R. D. Grober, “Playing with polarity,” Phys. Status Solidi B 228(2), 505–512 (2001).
[Crossref]

D. Li, M. Sumiya, S. Fuke, D. Yang, D. Que, Y. Suzuki, and Y. Fukuda, “Selective etching of GaN polar surface in potassium hydroxide solution studied by x-ray photoelectron spectroscopy,” J. Appl. Phys. 90(8), 4219–4223 (2001).
[Crossref]

M. Kuball, “Raman spectroscopy of GaN, AlGaN and AlN for process and growth monitoring/control,” Surf. Interface Anal. 31(10), 987–999 (2001).
[Crossref]

2000 (1)

M. Sumiya, K. Yoshimura, T. Ito, K. Ohtsuka, S. Fuke, K. Mizuno, M. Yoshimoto, H. Koinuma, A. Ohtomo, and M. Kawasaki, “Growth mode and surface morphology of a GaN film deposited along the N-face polar direction on c-plane sapphire substrate,” J. Appl. Phys. 88(2), 1158–1165 (2000).
[Crossref]

1998 (2)

J. L. Rouviere, J. L. Weyher, M. Seelmann-Eggebert, and S. Porowski, “Polarity determination for GaN films grown on (0001) sapphire and high-pressure-grown GaN single crystals,” Appl. Phys. Lett. 73(5), 668–670 (1998).
[Crossref]

S. Fuke, H. Teshigawara, K. Kuwahara, Y. Takano, T. Ito, M. Yanagihara, and K. Ohtsuka, “Influences of initial nitridation and buffer layer deposition on the morphology of a (0001) GaN layer grown on sapphire substrates,” J. Appl. Phys. 83(2), 764–767 (1998).
[Crossref]

1996 (1)

B. Heying, X. H. Wu, S. Keller, Y. Li, D. Kapolnek, B. P. Keller, S. P. Denbaars, and J. S. Speck, “Role of threading dislocation structure on the x-ray diffraction peak widths in epitaxial GaN films,” Appl. Phys. Lett. 68(5), 643–645 (1996).
[Crossref]

1988 (1)

G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988).
[Crossref]

1949 (1)

N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949).
[Crossref]

Albrecht, M.

Alden, D.

Aleksov, A.

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

Altamirano, E.

Ambacher, O.

Bae, D.

Bagal, A.

Bain, L. E.

Bassim, N. D.

Benamara, M.

Berkels, B.

Bhardwaj, M.

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

Brown, D. F.

Bryan, I.

Bryan, Z.

Burnett, T. L.

Cabrera, N.

N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949).
[Crossref]

Cao, H.

Chang, C. H.

Chang, C. Y.

Chen, K. H.

Chen, L.

Chernyak, L.

Chichibu, S. F.

Cho, Y. H.

Choi, D.

Choi, J. H.

Chowdhury, A.

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

Chu, B. H.

Chung, T. H.

Collazo, R.

S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

Courville, A.

Cui, M.

Cuomo, J. J.

Dai, Y.

Degroote, B.

Denbaars, S. P.

Di Fabrizio, E.

Di Felice, R.

Dimitrov, R.

Duffy, R.

Duscher, G.

Eddy, C. R.

Eddy Jr, C. R.

Eickhoff, M.

Fichtenbaum, N. A.

Franke, A.

Fujita, Y.

Fuke, S.

Fukuda, Y.

Gao, P.

Garces, N. Y.

Ge, X.

Gerhold, M.

Ghashghaei, H. T.

Giugni, A.

Goswami, R.

Grandjean, N.

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

Grober, R. D.

Guo, Q.

Guo, S.

Guo, W.

gyu Kang, S.

Haigh, S. J.

Han, H. N.

Han, J.

Hashimoto, T.

Hernandez-Balderrama, L. H.

Heying, B.

Hite, J. K.

Hoffmann, A.

Hoffmann, M. P.

Hoo, J.

Hu, Y.

Hussey, L.

Hwang, J.

Hwang, K.

Inoue, Y.

Ito, T.

Ivanisevic, A.

Jang, J.

Jasinski, J.

Jeong, T.

Jiang, H.

Jiang, J.

Johnson, C. A.

Kaess, F.

Kaiser, M.

Kang, S.

Kapolnek, D.

Karrer, U.

Katayama, R.

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

Kawasaki, M.

Keller, B. P.

Keller, S.

Kim, J.

Kirste, R.

Koinuma, H.

Kondo, T.

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

Kub, F. J.

Kuball, M.

M. Kuball, “Raman spectroscopy of GaN, AlGaN and AlN for process and growth monitoring/control,” Surf. Interface Anal. 31(10), 987–999 (2001).
[Crossref]

Kuge, Y.

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

Kunnen, E.

Kuwahara, K.

Kuze, K.

Laurent, M.

Lee, S.

Li, D.

Li, G.

Li, H.

Li, J.

Li, K.

Li, K. H.

Li, L.

Li, X.

Li, Y.

Liang, L.

Liliental-Weber, Z.

Lim, H. J.

Lin, R.

Liu, F.

Lu, J.

Markurt, T.

Massies, J.

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

Mastro, M. A.

Meng, F.

Mishra, U. K.

Mita, S.

S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

Mitra, S.

Mizuno, K.

Mohn, S.

Moon, D.

Mott, N. F.

N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949).
[Crossref]

Nakano, T.

Nemanich, R. J.

Neuberger, R.

Ng, H. M.

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

Nguyen, L.

Ning, J.

Nootz, G.

Oh, J.

Ohtomo, A.

Ohtsuka, K.

Olson, G. L.

G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988).
[Crossref]

Onabe, K.

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

Osinsky, A.

Osumi, N.

Park, M.

Park, Y.

Pawlak, B. J.

Pearton, S. J.

Pennycook, S. J.

Pezzagna, S.

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

Pfaff, N.

Pimenta, A. L.

Porowski, S.

Que, D.

Reddy, P.

Ren, F.

Rodriguez, B. J.

Rooney, A. P.

Roqan, I. S.

Roth, J. A.

G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988).
[Crossref]

Rouviere, J. L.

Ryu, J.

Sarkar, B.

Schalwig, J.

Schlesser, R.

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

Schuck, P. J.

Schulte, A.

Seelmann-Eggebert, M.

Setoguchi, A.

Sheikhi, M.

Sim, Y. C.

Sitar, Z.

S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]

Sltar, Z.

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

Speck, J. S.

Stach, E. A.

Stolyarchuk, N.

Stutzmann, M.

Sumiya, M.

Sun, H.

Sun, Q.

Suzuki, Y.

Takano, Y.

Teshigawara, H.

Thompson, G. E.

Tian, K.

Torre, B.

Troha, T.

Tweedie, J.

Twigg, M. E.

Uedono, A.

Van Dal, M. J. H.

Vennéguès, P.

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

Wang, H.

Wang, W.

Wang, Y. L.

Weemaes, R. G. R.

Weimann, N. G.

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

Weyher, J. L.

Wu, X. H.

Xie, J.

Xu, H.

Xu, K.

A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003).
[Crossref]

Yagi, H.

Yan, L.

Yanagihara, M.

Yang, D.

Yang, W.

Yang, W.-C.

Ye, J.

Yoon, E.

Yoshikawa, A.

A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003).
[Crossref]

Yoshimoto, M.

Yoshimura, K.

Yu, H.

Zakharov, D. N.

Zgonik, M.

Zhang, Y.

Zhang, Z.

Zhu, Y.

ACS Appl. Mater. Interfaces (1)

ACS Appl. Nano Mater. (1)

Adv. Funct. Mater. (1)

Appl. Phys. Express (1)

Appl. Phys. Lett. (11)

A. Aleksov, R. Collazo, S. Mita, R. Schlesser, and Z. Sltar, “Current-voltage characteristics of n/n lateral polarity junctions in GaN,” Appl. Phys. Lett. 89(5), 052117 (2006).
[Crossref]

A. Chowdhury, H. M. Ng, M. Bhardwaj, and N. G. Weimann, “Second-harmonic generation in periodically poled GaN,” Appl. Phys. Lett. 83(6), 1077–1079 (2003).
[Crossref]

IEEE Trans. Electron Devices (1)

J. Appl. Phys. (4)

J. Cryst. Growth (5)

S. Pezzagna, P. Vennéguès, N. Grandjean, and J. Massies, “Polarity inversion of GaN(0001) by a high Mg doping,” J. Cryst. Growth 269(2-4), 249–256 (2004).
[Crossref]

S. Mita, R. Collazo, and Z. Sitar, “Fabrication of a GaN lateral polarity junction by metalorganic chemical vapor deposition,” J. Cryst. Growth 311(10), 3044–3048 (2009).
[Crossref]

R. Katayama, Y. Kuge, T. Kondo, and K. Onabe, “Fabrication of lateral lattice-polarity-inverted GaN heterostructure,” J. Cryst. Growth 301-302, 447–451 (2007).
[Crossref]

J. Phys. D: Appl. Phys. (1)

Jpn. J. Appl. Phys. (1)

Mater. Sci. Eng., C (1)

Mater. Sci. Rep. (1)

G. L. Olson and J. A. Roth, “Kinetics of solid phase crystallization in amorphous silicon,” Mater. Sci. Rep. 3(1), 1–77 (1988).
[Crossref]

Opt. Mater. (1)

A. Yoshikawa and K. Xu, “In situ investigation for polarity-controlled epitaxy processes of GaN and AlN in MBE and MOVPE growth,” Opt. Mater. 23(1-2), 7–14 (2003).
[Crossref]

Optica (1)

Phys. Rev. Appl. (1)

Phys. Status Solidi B (2)

Rep. Prog. Phys. (1)

N. Cabrera and N. F. Mott, “Theory of the oxidation of metals,” Rep. Prog. Phys. 12(1), 163–184 (1949).
[Crossref]

Sci. Rep. (2)

Semicond. Sci. Technol. (1)

Sens. Actuators, B (1)

Surf. Interface Anal. (1)

M. Kuball, “Raman spectroscopy of GaN, AlGaN and AlN for process and growth monitoring/control,” Surf. Interface Anal. 31(10), 987–999 (2001).
[Crossref]

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.

Click here to see a list of articles that cite this paper

View in Article | Download Full Size | PPT Slide | PDF

View in Article | Download Full Size | PPT Slide | PDF

View in Article | Download Full Size | PPT Slide | PDF

View in Article | Download Full Size | PPT Slide | PDF

Fig. 5. Comparative analysis of a Ga-polar GaN grown on the 5-nm thick Al layer, N-polar GaN, and conventional Ga-polar GaN: (a) Raman spectra and (b) Photoluminescence spectra.

View in Article | Download Full Size | PPT Slide | PDF

Fig. 6. X-ray diffraction spectra of Ga-polar GaN grown on a 5-nm thick Al layer, N-polar GaN, and conventional Ga-polar GaN: (a) Phi scan of the Ga-polar GaN/5-nm Al layer for the GaN (10

$\bar{1}$

2) and sapphire (10

$\bar{1}$

4) planes and rocking curves of GaN films for the (b) (0002) and (c) (10

$\bar{1}$

2) reflections. The thicknesses of both Ga-polar GaN/5-nm Al layer and conventional Ga-polar GaN were 1.2 µm and the thickness of N-polar GaN varied at 1.0–1.4 µm due to its hexagonal hillocks.

View in Article | Download Full Size | PPT Slide | PDF

View in Article | Download Full Size | PPT Slide | PDF